Surrey · Fire damper testing
Bisley fire damper testing
Our technicians work in Bisley on fire damper drop testing and smoke damper testing, with a record for each damper. Fixed quotes, work around your opening hours and photo reports on every job.
- Blades that jam part-way when released
- Fire dampers that haven’t been tested for over a year
- Fire damper items raised by an assessor
Bisley: your questions answered
Who is the fire and rescue service for Bisley?
It’s Surrey Fire and Rescue Service, which covers Bisley. BESA guidance is that every fire damper is tested at least once a year, so an officer or insurer may expect a report less than a year old.
Do you test dampers in schools in Bisley during the holidays?
Yes. The holidays are the usual time for school work. There are about 5 schools, colleges and universities on the FSA’s food hygiene register within about 1.5 miles of Bisley. Send us your term dates when you ring 0345 646 2711 or email us, and we’ll fit the work in.
What’s TR19?
TR19® is BESA’s specification for ventilation hygiene. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
Which sectors do you work in?
Any commercial site with kitchens or ventilation, from a small pub to a hospital. Hotels, schools, care homes, offices, shops and leisure sites are all part of our work.
Who is responsible for fire damper testing?
The Regulatory Reform (Fire Safety) Order 2005 puts it on the responsible person. Annual testing by a competent person, with written records, is a practical way to show the duty is being met.
Is a quote from pictures possible?
Yes, where the pictures show enough. Otherwise, we book a survey at a time that suits the site, then a fixed quote.
What happens if a damper fails its test?
It’s listed on the report as a fault and we quote for remedials. After the repair, we test it again so the record shows a pass.
Do you test smoke dampers as well?
Yes, as well as drop testing fire dampers. The results go into the same report, so you have one record.
Fire damper testing in Bisley
The point of testing is to find dampers that fail. When one sticks, has a damaged link or is corroded, we report it and offer remedials, so the fault doesn’t just sit on a list. The work covers fusible link fire dampers, motorised smoke dampers and wall and floor dampers, and people most often call us about dust or grease build-up on damper blades and dampers flagged on a fire risk assessment.
Around a place like Bisley, dampers tend to be in schools, care homes, surgeries and hotels rather than big offices. The duty to keep them working is the same as in a city.
Nothing is signed off by word of mouth: a dated report with pictures of the work, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. Any parts we couldn’t reach are recorded on it too.
- Location
- Bisley (GU24)
- Region
- Surrey
- Paperwork
- Photo report after each visit
- Quotes
- A fixed price before we start
- Hours
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Checked
- 30 October 2026
Also in Bisley
Common problems we fix in Bisley
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person has a duty to keep fire safety measures working, and dampers are part of those measures. Employers, owners, landlords and managing agents all need evidence that the dampers have been checked.
Keep an eye out for these warning signs:
- Fire dampers with no recent test record
- Dust or grease build-up on damper blades
- Smoke dampers that need testing through their controls
- Fire dampers nobody can get to
For schools like Bisley CofE Primary School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
Comparing quotes
- Whether a written report and pictures are included
- Whether a survey comes first
- Whether the whole system is included, or only the parts that are easy to reach
- Whether the quote shows VAT
For landlords and multi-site operators
Keeping records across a portfolio is half the battle. Each visit ends with a dated report and pictures, so you can show an insurer or inspector what was done at each site.
If you look after several sites, we can plan visits across the whole estate and price them together. Every building has its own written report, so each one has its own record.
What happens if it’s left?
Sites in Bisley tested every year build up a history for each damper, which shows patterns early. A damper that was slow last year and sticks this year tells you something long before it fails outright. Booking ahead lets us plan the trip to Bisley at a time that suits you.
When the work has to happen, how we reach it and how big the site is can all change the price. Each of those is built into the quote and give you a fixed price before any work starts.
Why choose Duct Doctor in Bisley
- Photo reports with every job
- Out-of-hours work and a 24/7 emergency line
- Trading since 2009
- A fixed price before any work starts
Fire dampers in Bisley buildings
The FSA’s food hygiene register lists about 5 schools, colleges and universities and about 9 care, childcare and hospital premises with registered kitchens or food service within roughly a mile and a half of the centre of Bisley. Buildings like these often have ducted ventilation, and wherever a duct crosses a fire-resisting wall or floor there should be a damper, tested at least once a year. Bisley sits within the area of Surrey Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty. Brookwood Hospital is the nearest hospital, about 1.1 miles south-east of Bisley. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital.
The nearest hospital, Brookwood Hospital, is about 1.1 miles south-east; healthcare buildings like it are a reminder that dampers protect people who can’t move quickly.
Bisley is about 3 miles west of Woking, in Surrey. For fire damper testing in and around Bisley, please call 0345 646 2711, or send details by email for a fixed quote. Our area covers London and the South East, Bisley included. 395 places in Surrey are on our list, from busy centres to quieter spots. Our Guildford page covers sites nearby, about 6 miles away.
Postcode districts we cover here for fire damper testing: GU24. If you need fire damper testing at premises on Hawthorn Way, Germander Drive and Wilcot Close or a nearby road, our technicians can take on the work. Being close to the A322, Bisley is easy for our technicians to reach for fire damper testing. Nearby, we also carry out fire damper testing in Lucas Green (1 mile north-west), West End (1 mile north), Knaphill (1 mile south-east), Sheet's Heath (1 mile south) and Penny Pot (1 mile north-east). Within a short drive, we also cover Guildford (6 miles south-east), Woking (3 miles east), Camberley (4 miles west), Farnham (11 miles south-west), Egham (8 miles north-east) and Walton-on-Thames (11 miles east).
What’s near Bisley
We work in commercial kitchens and buildings around Gordon's School, Bisley and West End Commons and The Crown pub and the streets around them. For rail, the closest station is Brookwood station, roughly 1.6 miles south. A little further out are The Peacocks (3.3 miles east) and The Museum of The National Rifle Association (1.4 miles south-west). The countryside around Bisley includes Brookwood Lye.
What happens on the day
The visit has three parts: getting the area ready, doing the work and signing it off. Set-up means sheeting and making equipment safe, while signing off means the written report and pictures. Most of the time goes on the work itself, which takes from an hour or two in a small building to several visits on a large estate. Everything the job in Bisley needs is worked out beforehand, from the survey.
- Before the visit, we agree access, timings and any areas with restrictions.
- We open up ceilings and hatches and take off each access panel.
- We release each blade and check it shuts all the way.
- We reset it and record any dirt, corrosion or damage.
- Panels and tiles go back, and the results are written up.
How to prepare
- Make sure equipment near the work can be switched off and left to cool
- Mention any parking or loading restrictions
- Let us know how we reach the system, including roofs, risers and plant rooms
Get a fixed quote
If you need fire damper testing in Bisley, ring 0345 646 2711 or send us an email. Tell us what kind of premises it is and when it’s open, plus photos or the previous report if they’re to hand. A fixed quote normally follows within one working day.
Related advice
Staff cleaning versus specialist work
Staff cleaning and specialist work are not the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but they do not reach the grease that builds up further in. Reaching it takes a specialist with the right equipment.
Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, next to our reports.
When it’s something else
Before booking, it helps to know what’s not included:
- Designing the building’s fire compartments
- Faults in the alarm or building controls that signal smoke dampers
- Ductwork crossing a fire wall with no damper fitted
If you’re not sure, just call 0345 646 2711 or drop us a line and we’ll give you a straight answer.
What the work covers
- Hospitals and care homes
- Riser dampers
- Offices and schools
- Fusible link fire dampers
- Wall and floor dampers
- Motorised smoke dampers
Keeping the system healthy
Here’s the after-treatment advice, in brief:
- Make sure access panels stay clear and usable
- Update the register when ductwork changes
- Keep damper test reports with the fire safety log
- Keep to at least yearly testing
Dampers we couldn’t reach are listed with the reason, such as no access panel or a blocked hatch. We can fit access panels so they can be tested next time.
Keeping to at least annual testing stops small faults turning into failed dampers. Faults caught early are easier to fix.