Kent · Fire damper testing
Fire damper inspection in Aylesford
Fire damper testing for Aylesford, with a survey first and a report with photos at the end. Ask us for a fixed quote.
- Fire dampers that haven’t been tested for over a year
- Smoke dampers with no recent test
- Rusted damper blades and springs
What we do, step by step
The first job on site is protection: floors, worktops and anything near the work are covered. Then we make the system safe and start. It takes a few hours for a single floor, with bigger buildings phased over more than one visit, and we clear up before we go. Getting to the system matters more than parking in a place like Aylesford, so let us know how to reach it.
- First we check the schedule and the last set of results.
- We locate every damper and note any we cannot reach.
- We test fire dampers by dropping them and smoke dampers by operating them through the controls.
- Passes are reset and any failures recorded with the reason.
- We report the results and offer remedials on failed dampers.
Getting ready for the visit
- Tell us about site rules, permits or sign-in
- Move anything stored near the system
- Dig out any earlier paperwork for the system
How to get a quote
We do not publish a price list, because every site is different. We look at your system first, from pictures or on a visit, then send a fixed quote. To get going, give us a ring on 0345 646 2711 or use the quote form.
Related advice
Fire damper testing in Aylesford
Plenty of buildings have dampers nobody has looked at since they were fitted. Ceilings get lowered, hatches get boarded over and paperwork goes astray. We locate and test the dampers we can reach and record the ones we can’t, so you know where the gaps are. If you’re dealing with fire dampers that haven’t been tested for over a year and dust or grease build-up on damper blades, we can put it right, from wall and floor dampers, offices and schools and fusible link fire dampers onwards.
A building in a smaller place like Aylesford might have only a few dampers, but each one still needs drop testing at least once a year, with the result recorded.
Think of the report as the system’s health record: a dated account with photos of everything we did. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal and sits alongside the report.
- Place
- Aylesford (ME20)
- Wider area
- Kent
- Records
- Photo report after every visit
- Quote
- A fixed price before we start
- Working hours
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
What fire damper testing cannot fix
Some problems need a different service or another trade:
- Fire-stopping gaps around the duct where it passes through the wall
- Dampers that were never installed where they’re needed
- Faults in the alarm or building controls that signal smoke dampers
If in doubt, call us on 0345 646 2711 or send us an email and we will say what we think.
Parts of the system we cover
- Motorised smoke dampers
- Hospitals and care homes
- Riser dampers
- Wall and floor dampers
- Offices and schools
- Fusible link fire dampers
In-house cleaning or a specialist?
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but hidden parts of the system still need specialist attention.
Staff cleaning and specialist work are not the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
Also near Aylesford
Other services in Aylesford
Managing agents and facilities teams in Aylesford
Multi-site operators often want one contractor and one number. We work across London and the South East, so a run of sites can go into one programme and kept to a regular schedule.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we are happy to quote for all of it.
FAQs for Aylesford
Can you come to Aylesford after we close?
Yes, we can come after you close and finish before you open. It means the site in Aylesford keeps running as normal. Tell us your opening hours when you ask for a quote.
Can you get to a site in Aylesford?
Yes. Aylesford is within the area we cover across London and the South East. A survey first, from photos or a visit, means we arrive with the right kit.
What’s TR19?
It’s the industry benchmark for cleaning ventilation and kitchen extract systems, written by BESA. It sets out inspection, cleaning and record keeping and expects a risk-based approach.
How much does fire damper testing cost?
Every site is different, so each gets its own fixed quote. For a quote, call us on 0345 646 2711, or email photos with the site type, opening hours and a few photos.
How far ahead should we book?
That depends on the slot you want and the size of the job. Mention your preferred dates with your enquiry, and if it’s an emergency, call us any time.
Can you look after several sites?
Yes. You deal with one contact for every site in our area, with visits on a regular schedule.
What information do you need?
Some photos and a quick description of the system, with the address and opening hours. If we need more, we will ask.
How do you protect the area?
With sheeting and covers, before anything else happens. We keep the work contained and clean down when we finish.
Between visits
Think of this as the after-treatment advice, in brief:
- Keep cables and fixings away from damper blades
- Warn anyone working in ceiling voids about the dampers
- Update the register when ductwork changes
- File every damper report where your assessor can find it
Dampers we couldn’t reach are listed with the reason, such as no access panel or a blocked hatch. Access panels can be fitted so those dampers are tested on the next visit.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Rusted parts are one of the main reasons dampers fail to close.
What affects the cost of fire damper testing
Some jobs are bigger than they look, and some smaller. The main factors:
- One-off work versus a regular cycle
- The number of sites or systems
- How easy every part is to reach
- Site requirements such as sign-in and permits
What you pay reflects the actual work. That is why every job is surveyed first, and why the quote is fixed before work begins.
Helping us quote
To speed up the quote, please include:
- A few general shots of the system
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Your opening hours and when the area is out of use
- The paperwork from the last visit, if you have it
To get a fixed quote, give us a ring on 0345 646 2711 or use the quote form with the site type, your trading hours and a short description of the system. A few photos and your last certificate or report help a lot. You will normally have a quote within one working day.
Fire damper testing in Aylesford: local notes
The FSA’s food hygiene register lists about 6 schools, colleges and universities and about 9 care, childcare and hospital premises with registered kitchens or food service within about 1.5 miles of central Aylesford. Buildings like these often have ducted ventilation, and wherever a duct crosses a fire-resisting wall or floor there should be a damper, tested at least once a year. For Aylesford, the closest hospital is Maidstone Hospital, roughly 1.7 miles south. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have. The fire and rescue service for Aylesford is Kent Fire and Rescue Service. When a fire safety officer audits a non-domestic building, maintenance of systems like dampers can come up.
Historic houses near Aylesford, with Starkey Castle about 4.5 miles north, are a reminder that older buildings can hold dampers in unexpected places. If you manage a care home or clinic near Aylesford, the testing that a hospital like Maidstone Hospital (about 1.7 miles south) relies on applies to your dampers too.
Aylesford is about 3 miles north-west of Maidstone, in Kent. Whatever kind of site you run in Aylesford, fire damper testing is something we can help with. We can work out of hours so the site keeps running. Aylesford is one of 922 towns, villages and districts in Kent where we work for commercial clients.
Our technicians cover all of the ME20 postcode area for fire damper testing and the roads nearby. That includes premises on Station Road, High Street and Hall Road and the roads around them. If your site is just outside Aylesford, we cover Ditton (1 mile west), Allington (1 mile south-east), East Malling (2 miles west), Well Street (2 miles south-west) and Fant (2 miles south). We also work in nearby towns such as Maidstone (3 miles south-east), Sittingbourne (12 miles east), Dartford (15 miles north-west), Sevenoaks (12 miles west), Royal Tunbridge Wells (14 miles south-west) and Gravesend (10 miles north-west).
Local landmarks in Aylesford
Around Aylesford, our work takes us to kitchens and buildings near Aylesford School, The Chequers pub and Ditton Quarry. There’s a railway station in Aylesford itself: Aylesford station. Nearby you’ll also find Allington Castle (1.7 miles east) and Medway megaliths (1.7 miles north-east). Green spaces nearby include Burham Down and Blue Bell Hill.
Signs you need fire damper testing in Aylesford
Links and springs age like any other part. A link can be damaged, painted over or swapped for the wrong one, and a tired spring may not drive the blade home, and that only becomes clear during a drop test.
Look out for any of the following:
- Dirty dampers that may not close
- Fire dampers that haven’t been tested for over a year
- Fire dampers nobody can get to
- Gaps in the fire damper test log
If you look after a building near Aylesford station with a fire risk assessment due, a damper test with a full record is worth having first.
Questions to ask before you book
- Whether they recommend a next date
- Whether inaccessible sections are listed on the report
- Exactly which parts of the system are covered
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor