Hampshire · Fire damper testing
Fire and smoke damper testing in Anmore
Fire damper testing for businesses, landlords and public buildings in Anmore. BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease.
- Dampers overdue for their annual drop test
- Corroded dampers in damp risers and plant rooms
- Missing or out-of-date damper records
Between visits
Think of this as the after-treatment advice, in brief:
- Act on failed dampers rather than leaving them on file
- Report leaks or condensation near ductwork quickly
- Update the register when ductwork changes
- Make sure access panels stay clear and usable
The next test should be no more than a year away. The guidance is at least once a year, so it helps to book it before the date slips.
Clean ductwork means less dust and grease reaching the dampers. It makes sense to plan duct cleaning and damper testing together.
About our fire damper testing in Anmore
The point of testing is to find dampers that fail. When one sticks, has a damaged link or is corroded, we report it and offer remedials, so the fault doesn’t just sit on a list. If you are dealing with dust or grease build-up on damper blades and dampers that stick or won’t close fully, we can put it right.
For a building in or near Anmore, the visit is planned ahead, with access agreed in advance, and every damper is drop tested, reset and recorded, the same as anywhere.
Accreditations are easy to claim and worth checking. Ours are BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001, and we’re fully insured.
- Place
- Anmore (PO7)
- Wider area
- Hampshire
- Records
- Photo report after every visit
- Quote
- A fixed quote up front
- Working hours
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Last updated
- 30 October 2026
Fire dampers in Anmore buildings
Food Standards Agency records list about 10 schools, colleges and universities and about 16 hospitals, care homes and childcare premises registered as food businesses in and around Anmore, up to about a mile and a half out. Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. Fire safety in Anmore falls to Hampshire and Isle of Wight Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty. For Anmore, the closest hospital is Queen Alexandra Hospital, roughly 3.6 miles south. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital.
Hospitals such as Queen Alexandra Hospital, about 3.6 miles south, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Anmore, the same annual testing applies. School buildings such as Denmead Infant School are usually tested in the holidays, wherever they have dampers.
Anmore is about 1 mile north-west of Waterlooville, in Hampshire. We provide fire damper testing for businesses, landlords and public buildings in Anmore and the rest of Hampshire. 683 places in Hampshire are on our list, large and small. For sites nearby, see our Portsmouth page (7 miles or so).
We work across the PO7 postcode area for fire damper testing and the streets around it. Whether your site is on Anmore Road and Soake Road or anywhere close by, our technicians can take on the work. Nearby, we also carry out fire damper testing in Wecock Farm (1 mile east), Denmead (1 mile west), Lovedean (1 mile north-east), Horndean (2 miles east) and Anthill Common (2 miles west). Larger places within reach include Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).
Near you in Anmore
In Anmore, that means kitchens and buildings near The Cowplain School and The Mead End pub, among other places. For rail, the closest station is Bedhampton station, roughly 4 miles south-east of the centre. Other landmarks nearby include Queen Alexandra Hospital (3.6 miles south) and Clanfield Earthwork (4.3 miles north-east). Green spaces nearby include St Clair's Meadow and Windmill Hill.
Anmore questions
Can the work in Anmore be done at night or at weekends?
Yes, we can come after you close and finish before you open. The work in Anmore can fit around your hours. Tell us your opening hours when you ask for a quote.
Can you test school fire dampers in Anmore out of term?
Yes, and it’s the easiest time to do it. There are about 10 schools, colleges and universities on the FSA’s food hygiene register within about 1.5 miles of Anmore. Send us your term dates when you ring 0345 646 2711 or email us, and we’ll fit the work in.
How long will damper testing take?
It takes a couple of hours for a few dampers, and a day or more across a big site. Access is the biggest factor, so we’ll confirm the time when we quote.
Can you fix fire dampers that fail?
We note the failure and what we found. A repair or a replacement can follow as a remedial job and test it again.
How much does fire damper testing cost?
Size, condition, access and working hours all affect the cost. Call for a fixed quote and we’ll usually reply within one working day.
Can you test motorised smoke dampers?
Yes. We operate each smoke damper from its controls and check it opens and closes fully. Where a controls contractor needs to be involved, we arrange it with you.
What do you need from me for a quote?
Where the site is, what it is and when it’s open, plus pictures of the system and your last certificate or report if you have one.
Do you certify fire dampers?
After testing, we provide a report covering each damper, with its location, its result and any faults. Keep it with your fire safety records.
Staff cleaning versus specialist work
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. The inside of ducts and units needs a specialist.
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We will take a look and give you a fixed quote.
Fixed quotes for fire damper testing in Anmore
A fixed price needs a few facts first. We look at:
- How many systems or sites are involved
- When the work can happen, such as evenings, overnight or weekends
- The scale of the work
- The condition we find in the survey
Putting the work off seldom saves money. Build-up, wear and faults tend to get worse, not better, and a neglected system can mean more work. If you are unsure, call 0345 646 2711 or email us and we will give you an honest view and a fixed quote.
Asking for a quote
Photos let us diagnose from a distance. Try to include:
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Your opening hours and when the area is out of use
- Any access panels or hatches you can see
- Where the plant sits or the system leaves the building, such as a roof or outside wall
Some systems can be priced from photos; others need a survey. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, the quote is fixed before any work is booked.
When something else is needed
To be straight with you, there are a few things this work won’t fix:
- Deciding where dampers should be fitted
- Gaps in the wall or floor around the damper
- Faults in the alarm or building controls that signal smoke dampers
If in doubt, give us a ring on 0345 646 2711 or drop us a line and we will say what we think.
Parts of the system we cover
- Wall and floor dampers
- Motorised smoke dampers
- Offices and schools
- Fusible link fire dampers
- Hospitals and care homes
- Riser dampers
How it works
When we arrive, we check the system against the survey or the photos you sent. If anything is different, we talk it through with the person on site before carrying on. From there, it takes anything from a couple of hours for a handful of dampers to a full day for a large building. Rural roads and tight entrances are worth telling us about before a visit to Anmore.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- We find every damper and open it up through the access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- We reset every damper that passes and check it’s left open.
- You get a report listing each damper, its result and any remedials needed.
How to prepare
- Agree a time when the area can be out of use
- Arrange a key holder or contact on site
- Clear loose items from the work area
Ask for a quote
If you need fire damper testing in Anmore, give us a ring on 0345 646 2711 or use the quote form. Tell us what kind of premises it is and when it’s open, plus photos or the previous report if they’re to hand. We typically send a fixed quote within one working day.
Read more
Part by part
Access panels
Testing depends on getting to the damper. Most need an access panel in the duct and a hatch in the ceiling or wall.
Ceiling voids and risers
Risers and service shafts often hold dampers at each floor. We work through them floor by floor so nothing is missed.
For landlords and multi-site operators
Where a tenant occupies the premises but the landlord owns the building, it’s worth checking the lease for who maintains the systems. We’re happy to deal with either side and send the paperwork to whoever needs it.
Multi-site operators often want one contractor and one number. We cover South East England and London, so a run of sites can go into one programme and kept to a regular schedule.