West Sussex · Fire damper testing
Fire Damper Testing in Angmering-on-Sea
Fire damper testing in Angmering-on-Sea, surveyed first and signed off with a written report and photos. Call for a fixed quote.
- Fire dampers that fail to drop shut
- Dampers that cannot be reached without an access panel
- Fire damper items raised by an assessor
How we handle fire damper testing in Angmering-on-Sea
Wherever a duct crosses a fire-resisting wall or floor, there should be a fire damper inside it. A fusible link holds the blade open until heat melts it, and the blade then drops to shut the duct. Drop testing proves that this still happens, and every result is written down, damper by damper. If you’re dealing with smoke dampers that need testing through their controls and dirty dampers that may not close, we can help, from riser dampers, fusible link fire dampers and hospitals and care homes onwards.
Rural buildings that have been converted or extended can have ducts passing through fire-resisting walls, where the dampers are easy to overlook. A first test typically starts with finding them all.
Accreditations are easy to claim and worth checking. Ours are BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001, with full insurance on top.
- Where
- Angmering-on-Sea (BN16)
- Region
- West Sussex
- Paperwork
- Photo report after each visit
- Price
- A fixed quote up front
- Hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
When something else is needed
A few issues sit outside what this work can do:
- Fire-stopping gaps around the duct where it passes through the wall
- Sign-off of the whole building’s fire safety
- Deciding where dampers should be fitted
If in doubt, phone us on 0345 646 2711 or drop us a line and we’ll say what we think.
What the work covers
- Wall and floor dampers
- Hospitals and care homes
- Offices and schools
- Riser dampers
- Motorised smoke dampers
- Fusible link fire dampers
How the visit works
A visit follows the same order every time: sheeting and protection first, make the system safe, carry out the fire damper testing, tidy up and leave you the report. The visit itself takes a few hours for a single floor, with bigger buildings phased over more than one visit. If you can send pictures, we can arrive in Angmering-on-Sea knowing what to expect.
- First we look at any damper register, drawings or earlier test reports.
- Dampers are located one by one and reached through their access panels.
- Fire dampers are drop tested and smoke dampers are run through their controls.
- Each one that passes is reset, ready to work.
- The results go into a report, with failed dampers and remedials listed.
Getting ready for the visit
- Clear the space around the work
- Plan for cooking equipment or plant to be off before we arrive
- Make sure someone can let us in and lock up afterwards
How to get a quote
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and many jobs can be priced from that alone.
Read more
Questions from Angmering-on-Sea
Who is the fire and rescue service for Angmering-on-Sea?
West Sussex Fire and Rescue Service is the fire and rescue service for Angmering-on-Sea. BESA guidance is that every fire damper is tested at least once a year, so an officer or insurer may expect a report less than a year old.
Can sea air affect fire damper testing in Angmering-on-Sea?
It can. Angmering-on-Sea is within about 1 mile of the coast, and salt air speeds up corrosion. If corrosion is stopping a blade, the report says so and remedial work can be quoted.
Is there a survey before the work?
Yes. We always survey first, either from photos and details you send or on a site visit. A fixed quote follows.
Are you accredited?
We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we are fully insured.
How much time does a damper test visit need?
Expect it to take a couple of hours for a few dampers, and a day or more across a big site. How easily we can reach the dampers makes the most difference, so we’ll confirm the time when we quote.
Is TR19 cleaning required by law?
No. TR19® is BESA’s specification, not legislation. The law is the Regulatory Reform (Fire Safety) Order 2005, which makes the responsible person assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
Do you test smoke dampers as well?
Yes. We test smoke dampers through their control system, as they’re motor driven. Each one is checked for full travel and the result recorded.
What does TR19 mean?
TR19® is the BESA specification for keeping ventilation systems clean. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
Landlords, agents and facilities managers
Keeping records across a portfolio is half the battle. Each visit produces a dated report with pictures, so you can show an insurer or inspector what was done at each site.
Facilities teams in offices, schools and healthcare sites book us too across West Sussex. Larger estates can be phased building by building to keep disruption down.
Common problems we fix in Angmering-on-Sea
Over the life of a building, owners, tenants and contractors come and go, and the damper records don’t always go with them. With no register, it’s hard to say how many dampers exist, let alone when they were tested.
What we are most often called out for:
- Fire dampers that fail to drop shut
- Dampers flagged on a fire risk assessment
- Fire dampers with no recent test record
- Fire dampers nobody can get to
For schools like East Preston Infant School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
Questions to ask before you book
- Whether the whole system is included, or only the parts that are easy to reach
- Proof of accreditation you can verify
- Whether the quote shows VAT
- What happens if part of the system cannot be accessed
Why act early in Angmering-on-Sea
If a damper cannot close, the wall it sits in has a hole in it during a fire. Everything else about the compartment can be right and the duct still lets it down. It’s far better to find that out on a test than in a fire. It’s worth booking a check, because nobody sees inside a duct day to day.
What you pay reflects the actual work. That is why we survey first, from pictures or on site, and the price is agreed before work begins.
Why us?
- Trading since 2009
- CHAS and SafeContractor accredited, with ISO 9001
- Fully insured
- Every job surveyed first
Read our cost guide or how to check a contractor.
Places near Angmering-on-Sea
What else we do in Angmering-on-Sea
Fire damper testing in Angmering-on-Sea: local notes
The coast is only about 1 mile from Angmering-on-Sea. Near the sea, we look closely for rust on dampers serving intakes and louvres. Food Standards Agency data includes about 12 schools, colleges and universities and about 18 hospitals, care homes and childcare premises in and around Angmering-on-Sea, up to about a mile and a half out. Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. The fire and rescue service for Angmering-on-Sea is West Sussex Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
Ecclesden Manor, about 1.7 miles north, is one of the historic houses near Angmering-on-Sea, and older buildings converted to new uses often have ventilation added later. If you manage a care home or clinic near Angmering-on-Sea, the testing that a hospital like Zachary Merton Hospital (about 1.1 miles west) relies on applies to your dampers too.
Angmering-on-Sea is about 1 mile south-east of Rustington, in West Sussex. Anywhere in BN16, we can take on fire damper testing. 371 places in West Sussex are on our list, from busy centres to quieter spots. Our Brighton page covers sites nearby, about 15 miles away.
Every address in BN16 is within our area for fire damper testing, from busy streets to back roads. That includes premises on Sea Lane, Sea Road and Manor Road and nearby roads. Other places close to Angmering-on-Sea include West Kingston (1 mile east), East Preston (1 mile north), Kingston Gorse (1 mile east), West Preston (1 mile north-west) and Ferring (1 mile east). Larger places within reach include Worthing (4 miles east), Bognor Regis (9 miles west), Chichester (13 miles west), Selsey (14 miles west), Shoreham-by-Sea (9 miles east) and Lancing (7 miles east).
Local landmarks in Angmering-on-Sea
We work in commercial kitchens and buildings around The Angmering School. For rail, the closest station is Angmering station, roughly 1 mile north-west. Well-known places in the area include Rustington Museum (1.2 miles west) and Zachary Merton Hospital (1.1 miles west). Green spaces nearby include Highdown Hill.
Looking after it afterwards
A little care between visits keeps the system in better shape. We recommend:
- Fix water leaks in plant rooms and risers promptly
- Keep the damper register up to date after any building work
- Keep to at least yearly testing
- Do not let hatches get painted shut or boarded over
Tell other contractors where the dampers are, and that they mustn’t tie, wedge or obstruct them. Anything they disturb should be checked again.
Deal with leaks and condensation near dampers quickly. Corrosion is a common reason blades stick.
What the work involves, part by part
Schools, hospitals and care homes
Schools are often easiest to test during the holidays, with no classes to work around.
Ceiling voids and risers
Many dampers sit above suspended ceilings. Ceiling tiles are lifted for access and replaced afterwards.