Kent · Extract fan repair and replacement
Willesborough extract fan repair
Need extract fan repair in Willesborough? We survey first, give you a fixed quote and work around your opening hours, finishing with a written report and photos.
- A fan that won’t start at all
- Vibration spreading from the fan into the ducts
- A fan running too slowly to clear the kitchen
Extract fan repair in Willesborough
Think of it as a check-up for the fan: listen to it, diagnose the fault, then treat it. The aim is steady, quiet extraction and a clear explanation of what was done. The work covers fan motors, kitchen extract fans and bearings, and people most often call us about a squealing belt on start-up and vibration spreading from the fan into the ducts.
In a place like Willesborough, extract fans are often older units on a wall or roof. An older fan that fails may be better replaced than repaired.
The report is your system’s health record: a dated account with pictures of everything we did. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal, ready for your insurer.
- Location
- Willesborough (TN24)
- Wider area
- Kent
- Records
- Photo report after each visit
- Price
- A fixed quote up front
- When we work
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
What a clean will not put right
Not every problem is solved by extract fan repair, and we’d rather say so up front. It doesn’t solve:
- A system that needs redesigning rather than repairing
- Problems with the electrical supply to the fan (an electrician’s job)
- Grease throughout the ductwork, which needs a full TR19 clean
If in doubt, call 0345 646 2711 or use the quote form and we will say what we think before you book.
What we work on in Willesborough
- Roof and wall fans
- Bearings
- Belts and pulleys
- Kitchen extract fans
- Fan housings
- Fan motors
Different parts, different methods
Fan controls
Supply faults are a job for an electrician. We’ll tell you if that is what we find and explain what we found.
Direct-drive fans
In a direct-drive fan, the impeller sits on the motor shaft. With no belts to wear, we look at the motor, bearings and impeller.
Extract fans in Willesborough
Food Standards Agency data counts about 87 restaurants, cafés and canteens and about 29 takeaways and sandwich shops within roughly a mile and a half of the centre of Willesborough. Every one of them that cooks under a canopy depends on its extract fan to keep cooking. Environmental health officers from Ashford council inspect food businesses in Willesborough. Ventilation is part of food hygiene law, which expects it to be suitable and sufficient. That’s one more reason not to keep cooking with a broken fan. Willesborough is about 50 miles from central London, well within the area we cover across London and the South East. Evening, overnight and weekend visits are all possible.
Occasional-use kitchens, such as a hall kitchen near Church of St Mary the Virgin or elsewhere in Willesborough, are where a stiff or seized fan can turn up. For school kitchens, at schools like Willesborough Junior School for example, a planned fan repair in the holidays avoids losing lunches in term time.
Willesborough is about 1 mile east of Ashford, in Kent. Wherever you are in the TN24 postcode area, we can take on extract fan repair. Our area takes in 922 places across Kent, large and small. There’s also a page for Maidstone, about 18 miles away.
Postcode districts we cover here for extract fan repair: TN24. Whether your site is on Mead Road, Mill Lane and Milne Road or anywhere close by, our technicians can take on the work. Being close to the A2070, Willesborough is easy for our technicians to reach for extract fan repair. We also cover the places around Willesborough: South Willesborough (1 mile south-west), Newtown (1 mile south-west), Ashford (1 mile west), Finberry (1 mile south) and Park Farm (2 miles south-west). Larger places within reach include Canterbury (13 miles north-east), Folkestone (12 miles east), Faversham (12 miles north), Hythe (9 miles south-east), Davington (12 miles north) and Preston (12 miles north).
Near you in Willesborough
Locally, jobs take us to businesses close to The William Harvey Public House, Ashford Green Corridors and The North School. The closest station to Willesborough is Ashford International station, about 0.9 miles west of the centre. Well-known places in the area include William Harvey Hospital (0.8 miles east) and Ashford Designer Outlet (0.8 miles west). Not far away are Hatch Park.
Common problems we fix in Willesborough
Fixings and anti-vibration mounts work loose or perish over time. The fan’s movement then travels into the ductwork and structure and that is a common source of rattles.
Look out for any of the following:
- An old fan that needs replacing
- Poor airflow at the canopy
- An extract fan that rattles or knocks
- An extract that vibrates through the ductwork
For a takeaway near Ashford International station, a fan that fails on a busy evening means turning customers away, and our emergency line runs 24/7.
Questions to ask before booking
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- What paperwork you get at the end
- Whether the quote is based on a survey or photos
- How they set the interval to the next visit
Places near Willesborough
More services for Willesborough
Managing agents and facilities teams in Willesborough
Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We are happy to deal with either side and send the paperwork to whoever needs it.
We work for landlords, managing agents and facilities managers as well as the people running the site. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
Keeping the system healthy
To keep the system working properly between visits:
- Write down when the fan misbehaves
- Keep the fan on a planned cleaning cycle
- Keep the emergency number where staff can see it
- Keep the area around the fan controls clear
We run the fan and check it’s steady before we go. We explain the fault and the fix along with anything else that needs watching.
The fan is part of every full TR19 clean. Keeping grease off the impeller is one of the simplest ways to protect it, so planned cleaning helps the fan last.
FAQs for Willesborough
Can you get to a site in Willesborough?
Yes, we work in villages as well as towns, and Willesborough is covered. Photos of the system and directions to the site help us plan the visit.
Who do I call if an extract fan fails in Willesborough?
Day or night, a failed fan in Willesborough can be reported on our emergency line. The number to ring is 0345 646 2711. Tell us where the fan is and how to reach it.
How much notice should we give?
Book as early as you can for planned work, especially if the next clean or test is due soon. Emergencies are different, because our line is open 24/7.
Is there a survey before the work?
Yes, always. Diagnosis comes before treatment: the survey shows what needs doing and what access we need, and the quote is based on that.
What should go in our maintenance log?
Each report and certificate we give you, filed in the maintenance log with your in-house cleaning records. BESA says certificates should show the date, location and technician.
Can we book visits on a schedule?
Yes. Scheduled maintenance plans are part of what we do, set at the interval the system needs. The report from each visit recommends the next date.
What is TR19?
TR19® is the BESA specification for keeping ventilation systems clean. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.
Is it worth cleaning the extract while you’re fixing the fan?
Often it makes sense to do both. A TR19 clean covers the canopy, plenum, ductwork and fan, with a certificate and photo report.
What we do, step by step
Your staff do not need to do much on the day. A contact on site lets us in at the agreed time and points us to the system, and we take it from there. Before we leave, the area is tidied and the paperwork follows. Visits to a place like Willesborough are planned ahead, so we arrive with what the survey says the job needs.
- First, you tell us the symptoms: noise, shaking, weak extraction or no power.
- Power to the fan is isolated before we open the housing.
- We check the motor, bearings, drive, impeller and mountings.
- You get our diagnosis and a fixed quote to repair or replace.
- We fix or replace the fan, then test it running before we leave.
Preparing for the visit
- Plan for cooking equipment or plant to be off before we arrive
- Tell us about site rules, permits or sign-in
- Name a contact who can let us in at the agreed time
How to get a quote
Need a price for extract fan repair? Please call us on 0345 646 2711, or email photos and tell us about the site. We will talk you through the work and give you a fixed quote before anything is booked.
Advice
What your team can do, and what needs us
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that will not come clean, they should report it rather than try to fix it. We can diagnose it and quote.
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.