Essex · Extract fan repair and replacement
Extractor fan repair in Tilty
Extract fan repair and replacement for Tilty, with a survey first and a report with pictures at the end. Ask us for a fixed quote.
- An extract fan that rattles or knocks
- Poor airflow at the canopy
- A fan worn beyond sensible repair
Extract fan repair around Tilty
At about 34 miles from central London, Tilty sits well inside the area we cover. Evening, overnight and weekend visits are all possible. It’s Uttlesford council that sends environmental health officers to food businesses in Tilty. Ventilation is part of food hygiene law, which expects it to be suitable and sufficient. That makes a fan repair urgent rather than something to put off.
For kitchens in and around Tilty, our emergency line runs 24/7.
Tilty is about 3 miles north-west of Great Dunmow, in Essex. Tilty gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with photos. Our area takes in 644 places across Essex, large and small. There’s also a page for Chelmsford, about 14 miles away.
Extract fan repair in CM6 follows the same survey, fixed quote and written report as everywhere else we cover. Close by, we work in Duton Hill (1 mile north-east), Great Easton (1 mile south-east), Chickney (1 mile west), Sibley's Green (2 miles north-east) and Monk Street (2 miles north-east). Larger places within reach include Chelmsford (14 miles south-east), Braintree (10 miles east), Harlow (13 miles south-west), Witham (15 miles south-east), Saffron Walden (8 miles north-west) and Halstead (13 miles east).
Local landmarks in Tilty
In Tilty, that means kitchens and buildings near The Rising Sun Public House and the streets around them. The closest station to Tilty is Stansted Airport station, roughly 3.2 miles south-west of the centre. Other landmarks nearby include Little Easton Moat (1.8 miles south). For a walk, there’s West Wood.
Extract fan repair in Tilty, done properly
A faulty fan does not always mean a new one. Sometimes cleaning the impeller or renewing worn parts is enough, and that’s what we’ll recommend. Where the motor has burnt out or the unit is past saving, we fit a replacement matched to the duct and the kitchen. We are often asked to deal with a belt-driven fan that squeals and a fan shaking on its mountings, on bearings, fan housings and fan motors.
Somewhere as small as Tilty, a kitchen extract fan might serve a pub, a school, a care home or a hall kitchen. When one fails, the cooking stops, and our 24/7 emergency line covers rural addresses too.
The paperwork matters as much as the work. You get a written report with pictures after every visit, listing what was done, anything we couldn’t reach and when the next visit is due. Keep it with your fire safety records so it’s ready for an insurer, fire officer or EHO.
- Where
- Tilty (CM6)
- Region
- Essex
- Records
- Written report with photos
- Quote
- A fixed price before any work starts
- When we work
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Checked
- 30 October 2026
Towns and villages near Tilty
What else we do in Tilty
Keeping the system healthy
After the visit, a few habits help the work last:
- Keep a record of any trips or stoppages
- Get a noisy fan checked rather than slowed down
- Keep the area around the fan controls clear
- Make sure staff know who to call if the fan fails
Clean filters help a repaired fan stay that way. Less grease on the impeller means less wear and the quieter it runs.
A scheduled maintenance plan keeps the whole system on a regular cycle, which means the fan is seen regularly and problems are spotted sooner.
Do you need extract fan repair in Tilty?
Blocked filters and greasy ducts make the fan work harder. An overworked motor overheats, trips out or eventually burns out.
Keep an eye out for these warning signs:
- Vibration spreading from the fan into the ducts
- Weak extraction and a smoky kitchen
- A motor that trips out or overheats
- A fan rattling in its housing
If you look after a church or hall kitchen near Church of St Mary the Virgin, or anywhere in Tilty, test the extract fan before a big event rather than on the day.
Before booking anyone
- Whether the price is fixed
- Whether the whole system is included, or only the parts that are easy to reach
- What hours they’ll be on site
- Whether the quote is based on a survey or photos
Why deal with it now?
Fan noise tends to get worse, not better. Bearings that are left to wear can fail suddenly and the fan may stop when you are busiest. Sorting it while it still runs is far easier to plan. Equipment tucked in a roof space or outbuilding near Tilty rarely gets looked at unless someone books it.
Combining work into one visit or one programme can make for a more efficient booking. Tell us about everything you’d like looked at and we will price it together.
Why Tilty businesses choose us
- Photo reports with every job
- Out-of-hours work and a 24/7 emergency line
- A single point of contact for sites across the South East and London
- Every job surveyed first
Tilty: your questions answered
Can you work in Tilty outside opening hours?
Yes, out-of-hours work is a big part of what we do. The work in Tilty can fit around your hours. Just give us a ring on 0345 646 2711 or send us an email with your opening times and we’ll plan around them.
Who carries out food hygiene inspections in Tilty?
Food hygiene inspections in Tilty are carried out by Uttlesford council. If the extract fan has failed, it’s worth having the repair booked, and the details to hand, before an officer visits.
Can you look after several sites?
Yes. Send the list of sites and the work at each and we will quote them together.
How do you keep the site clean during the work?
We start with protection: sheeting over floors, worktops and anything close to the work. The area is left tidy, with our waste taken away.
Do you provide a certificate or report?
Yes, always. It’s a dated, written report with pictures, and TR19® Grease cleans come with a certificate through the BESCA VHE portal. Keep it in your maintenance log.
Do we lose a day’s trading?
Not typically. The area we’re working in has to be out of use while we are there, so we book a time when it would be closed anyway.
Can you supply and fit a replacement fan?
Yes. We fit replacement fans as well as repairing old ones, and we will explain the options.
Are you accredited?
We hold CHAS, SafeContractor and ISO 9001, alongside BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
Multi-site and managed buildings
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.
Records are where multi-site compliance often slips. Each visit produces a dated report with photos, ready to show insurers, fire officers or EHOs.
What happens on the day
There are three stages on the day: getting the area ready, doing the work and signing it off. Set-up means sheeting and making equipment safe, and the sign-off is a written report with photos. Most of the time goes on the work itself, which takes part of a day for most faults, with a return visit if parts have to be ordered. For a village or hamlet like Tilty, tell us about narrow lanes, gates and parking when you book.
- You describe the fault and we arrange a visit.
- On site, the fan is safely isolated.
- The fan and its controls are checked to pin down the fault.
- You get a fixed price for putting it right.
- We fix the fault and run the fan to check it.
Preparing for the visit
- Mention any parking or loading restrictions
- Agree a time when the area can be out of use
- Allow time for equipment near the work to be turned off and cool down
Getting a quote
We don’t publish a price list, because every site is different. We look at your system first, from photos or on a visit, then send a fixed quote. To get going, call us on 0345 646 2711, or email photos.
Related advice
Different parts, different methods
Fan controls
Every fan has controls, from a speed controller to an isolator. A control fault can leave the fan dead or stuck at one speed.
Impellers and housings
Grease settles inside the fan housing as well as on the blades. We check both and cleaning may be part of the fix.
When something else is needed
To be straight with you, there are a few things this work will not fix:
- An extract system that was undersized from the start
- Cooking smells reaching neighbours, which may need odour control
- Faults on the gas side of an interlock system, which need a Gas Safe registered engineer
If you’re not sure, just call 0345 646 2711, or send details by email and we’ll give you a straight answer.
What we work on in Tilty
- Fan motors
- Fan housings
- Belts and pulleys
- Kitchen extract fans
- Bearings
- Roof and wall fans