Kent · Extract fan repair and replacement
Extract fan repair and replacement in Standen, Kent
Extract fan repair for Standen and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Ask us for a fixed quote.
- A dead fan motor
- A knocking noise from the extract fan
- A fan running too slowly to clear the kitchen
Extract fan repair in Standen, done properly
Across Standen, we deal with fan faults of every kind, from a squeal at start-up to a fan that will not run at all. We find the cause, give you a fixed price and fix it, or the fan is replaced if repair doesn’t make sense. We are often asked to deal with a belt-driven fan that squeals and a fan that won’t start at all, on fan motors, kitchen extract fans and roof and wall fans.
In a small place like Standen, fans are often on an outside wall or roof, open to wind and rain. That, with the grease, is hard on motors and bearings.
We are CHAS and SafeContractor accredited, we hold ISO 9001 and we’re fully insured. We are also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we have been trading since 2009.
- Location
- Standen (TN27)
- Wider area
- Kent
- Reporting
- Report and photos after the visit
- Quotes
- A fixed price before any work starts
- Working hours
- Out of hours as standard, 24/7 emergency line
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
Standen: your questions answered
Is there an emergency callout for extract fans in Standen?
Extract fan emergencies in Standen are covered around the clock. Phone 0345 646 2711 and we’ll talk through the fault and access. Let us know whether the fan is silent, noisy or tripping the power.
Can you get to a site in Standen?
Yes, we work in villages as well as towns, and Standen is covered. The journey is planned ahead, so a few details about the route help.
How do you protect the area?
By covering it before any work starts. The work is kept contained and leave the area clean.
Is there a survey before the work?
Yes. Every job is surveyed first, either from photos and details you send or on a site visit. Then you get a fixed quote.
Can you repair a fan rather than replace it?
Often, yes. A clean, a new belt or new bearings can bring a fan back and we only recommend replacement when repair does not make sense.
Do you offer maintenance contracts?
Yes. Tell us what you have and how it’s used, and we will suggest a schedule and quote for it.
Who is responsible for fire safety on the premises?
In the words of the Fire Safety Order 2005, it’s the responsible person. That is generally the employer or the person in control of the premises, and in shared buildings more than one person can have duties. Your lease and fire risk assessment should make it clear.
Is TR19 cleaning required by law?
No. TR19® is BESA’s specification, not legislation. The law is the Regulatory Reform (Fire Safety) Order 2005, which makes the responsible person assess and reduce fire risk, and cleaning to TR19® is the recognised way to show grease is under control.
Places near Standen
Also in Standen
The process
Night work is normal for us. Evenings, nights and weekends are when much of our work happens, so the site can open as normal afterwards. The visit itself takes anything from an hour or two to a full visit, depending on the fault. Seeing the system in photos first means the trip to Standen can be planned properly.
- First, you tell us the symptoms: noise, shaking, weak extraction or no power.
- The fan is isolated and opened up so we can see inside.
- We check the motor, bearings, drive, impeller and mountings.
- We explain the fault and give you a fixed price for the fix.
- We fix or replace the fan, then test it running before we leave.
How to prepare
- Tell us the best time to work, such as after service or at a weekend
- Mention any locked doors, roof access or ceiling voids
- Mention any sign-in, permit or induction we need
Get a fixed quote
Every quote begins with a look at the system, from your pictures and details or, where that is not enough, a survey on site. After that, you get a fixed price for the work, before work begins.
Related advice
When something else is needed
Some problems need a different service or another trade:
- Problems with the gas supply or its interlock valve
- Problems with the electrical supply to the fan (an electrician’s job)
- Smells from the discharge that need odour control equipment
Not sure which it is? You can ring 0345 646 2711 or email us and we will tell you honestly before you book.
Parts of the system we cover
- Kitchen extract fans
- Fan motors
- Roof and wall fans
- Bearings
- Fan housings
- Belts and pulleys
Extract fans in Standen
The FSA’s food hygiene register shows about 7 restaurants, cafés and canteens in Standen and the streets around it, up to about 1.5 miles out. A kitchen with a dead extract fan gets hot and smoky fast, and kitchens like these feel it at once. Food hygiene inspections in Standen are the job of Ashford council’s environmental health team. A kitchen with no working extract can fall short of the suitable and sufficient ventilation food hygiene rules expect. A kitchen without a working fan has a problem to fix quickly. Standen is about 41 miles from central London, well within the area we cover across London and the South East. The visit is fixed around your opening hours, not ours.
For kitchens in and around Standen, our emergency line runs 24/7.
Standen is about 9 miles west of Ashford, in Kent. For extract fan repair in and around Standen, it’s easy to get a fixed quote: please call us on 0345 646 2711 or drop us a line. Our area covers London and the South East, Standen included. Standen is one of 922 towns, villages and districts in Kent we cover for extract fan repair. You can also see our page for Maidstone, about 11 miles away.
All of TN27 is within our area for extract fan repair, from busy streets to back roads. That includes premises on Smarden Road, Pook Lane and Weeks Lane and the roads around them. Nearby, we also carry out extract fan repair in Curteis' Corner (1 mile south-west), Lashenden (1 mile north-west), Monk's Hill (1 mile north-east), Biddenden (1 mile south-west) and Stede Quarter (1 mile south-east). We also work in nearby towns such as Maidstone (11 miles north-west), Ashford (9 miles east), Sittingbourne (15 miles north), Kings Hill (14 miles north-west), Foley Park (12 miles north-west) and Paddock Wood (12 miles west).
What’s near Standen
The closest station to Standen is Headcorn station, about 2.6 miles north-west of the centre. Other landmarks nearby include Benenden Hospital (3.5 miles south-west) and Romden Castle (2.7 miles north-east).
Multi-site and managed buildings
Running several sites is easier with one contractor. We cover South East England and London, so visits at different addresses can be planned together and kept on a regular cycle.
Keeping records across a portfolio is half the battle. Every visit ends with a dated report and pictures, so you can show an insurer or inspector what was done at each site.
Why it’s worth doing now in Standen
Weak extraction leaves heat, smoke and fumes in the kitchen. Staff work in hotter, steamier air and grease has more chance to settle on surfaces and in the duct. If the system at a site near Standen fails, there may be nowhere nearby to move to.
The cost depends on the size of the system, the condition it’s in and how easy it is to reach. You get a fixed price before we start, so there are no surprises.
What you get with us
- A single point of contact for sites across the South East and London
- Trading since 2009
- CHAS, SafeContractor and ISO 9001
- Evenings, overnight and weekends, plus 24/7 emergency callout
When to call us in Standen
Any kitchen that cooks for long hours works its fan hard, in Standen or anywhere else. On belt-driven fans, belts stretch, crack and start to slip, so the fan squeals or turns more slowly.
What we’re most often called out for:
- A fan that whines, hums or grinds
- An extract fan that rattles or knocks
- A fan that will not start at all
- Poor airflow at the canopy
Around Standen, as anywhere, we look at why a fan failed as well as fixing it.
Questions to ask before you book
- How VAT is shown on the quote
- Whether the whole system is included, or only the parts that are easy to reach
- Whether they’re fully insured
- Whether the figure could change on the day
Looking after it afterwards
Think of this as the after-treatment advice, short and simple:
- Make sure the fan is cleaned with the rest of the system
- Report new noises from the fan early
- Keep the emergency number where staff can see it
- Keep access to the fan controls unobstructed
Where parts need ordering, we explain what that means for the kitchen until we return. We then come back and fit them at a time that suits your service.
Clogged filters make the fan strain. Keeping filters clean eases the strain and helps prevent overheating.
Different parts, different methods
Belt-driven fans
Belt drives have more moving parts than direct-drive fans. More parts to inspect, but many faults are straightforward to fix.
Fan controls
We check the controls as part of every diagnosis since the motor is not always to blame.