Isle of Wight · Extract fan repair and replacement
Extractor fan repair in Shalfleet
Looking for extract fan repair in Shalfleet? We survey first, give you a fixed quote and work around your opening hours, then sign off with a report and pictures.
- An overheating extract motor
- A fan that whines, hums or grinds
- A fan that won’t start at all
When a fan fails in Shalfleet
Sea air reaches Shalfleet, which sits within about 2 miles of the coast. A fan exposed to sea air needs its fixings and housing checked more often than one inland. Kitchens in Shalfleet get their food hygiene inspections from Isle of Wight council. Ventilation is part of food hygiene law, which expects it to be suitable and sufficient. That is one more reason not to keep cooking with a broken fan.
Holidays are the time to replace a tired kitchen fan at schools such as Shalfleet Church of England Primary School, rather than mid-term. If you run a church or community hall kitchen, near Church of St. Michael the Archangel or elsewhere in Shalfleet, an extract fan that rarely runs can seize or fail when it’s needed.
Shalfleet is about 5 miles west of Newport, in the Isle of Wight. Shalfleet gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with photos. Across the Isle of Wight, we cover 125 places, Shalfleet among them. There’s also a page for Southampton, about 15 miles away.
Extract fan repair in PO30 is surveyed, quoted and booked the same way as anywhere else. Streets in the area include Scotts Close, Warlands Lane and Fleet Way, and we cover them all for extract fan repair. Nearby, we also carry out extract fan repair in Cranmore (1 mile north-west), Hamstead (1 mile north-west), Bouldnor (3 miles west), Yarmouth (3 miles west) and Thorns Beach (5 miles north). We also work in nearby towns such as Newport (5 miles east), Ryde (11 miles east), Cowes (6 miles north-east), Sandown (12 miles east), Shanklin (12 miles south-east) and Ventnor (12 miles south-east). Remote and island sites need a little more planning, so tell us where you are when you ask for a quote for extract fan repair.
Landmarks near Shalfleet
Around Shalfleet, our work takes us to kitchens and buildings near New Inn. Nearby you will also find Calbourne Water Mill And Rural Museum (1.4 miles south) and St Mary's Hospital (5.2 miles east). For a walk, there’s Boldre Foreshore and Westover Down.
About our extract fan repair in Shalfleet
Before anything is ordered, we diagnose. We look at the motor, the belts or direct drive, the impeller and the mountings and the speed control too. Then you’re given a fixed quote for the repair or the replacement. Typical jobs include poor airflow at the canopy and a knocking noise from the extract fan, across fan housings, bearings and belts and pulleys.
In a village or hamlet like Shalfleet, the kitchens with extract fans are few, wherever there are any. A failed fan stops the kitchen, and emergency callout is available 24/7, villages included.
Accreditations are easy to claim and worth checking. We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, with full insurance on top.

- Where
- Shalfleet (PO30)
- Wider area
- Isle of Wight
- Records
- Photo report after each visit
- Quote
- A fixed price before we start
- Hours
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Checked
- 30 October 2026
More services for Shalfleet
Leave it or put it right?
Where the cooking gas supply is interlocked with the extract, a failed fan can stop the kitchen cooking. Without extraction, the heat and fumes build up fast and fixing the fan early avoids a forced shutdown. Planning a trip to Shalfleet ahead is easier for everyone than a rushed one.
The cost depends on how big the system is, the condition it’s in and how easy it is to reach. You get a fixed price before any work starts, so you know where you stand.
Why choose Duct Doctor in Shalfleet
- Work around your opening hours, with 24/7 emergency cover
- We diagnose before we treat
- A fixed price before any work starts
- Trading since 2009
Read what affects the cost or our accreditations and certificates.
What extract fan repair can’t fix
We will always give you a straight diagnosis, so here’s what this work can’t put right:
- Smells from the discharge that need odour control equipment
- Problems with the electrical supply to the fan (an electrician’s job)
- Grease throughout the ductwork, which needs a full TR19 clean
Not sure which it is? You can ring 0345 646 2711 or drop us a line and we will tell you honestly before booking.
Where we work
- Fan housings
- Bearings
- Kitchen extract fans
- Roof and wall fans
- Belts and pulleys
- Fan motors
Common questions in Shalfleet
Is there an emergency callout for extract fans in Shalfleet?
Our emergency line runs 24/7, and Shalfleet is within the area we cover. Phone 0345 646 2711 and we will talk through the fault and access. Tell us where the fan is and how to reach it.
Can you work in Shalfleet outside opening hours?
Yes, evening, overnight and weekend work is normal for us. The site is handed back ready to open. Let us know the hours you’re closed and we’ll book within them.
What’s TR19?
It’s BESA’s specification and the benchmark insurers, fire officers and EHOs look to. It sets out inspection, cleaning and record keeping and expects a risk-based approach.
Will you tell us when the next visit is due?
Yes. How often depends on use and condition and the report sets out why.
Will you fit a new fan if ours cannot be repaired?
Yes. A replacement is matched to the system it’s going into with a fixed price agreed before we start.
Which accreditations do you hold?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We’ve been trading since 2009 and we’re fully insured.
Do you offer maintenance contracts?
Yes, of course. Tell us what you have and how it’s used, and we’ll suggest a schedule and quote for it.
What happens if you can’t reach some of it?
Anything we cannot reach goes on the report, with a note of where it is, and we explain what access is needed, such as extra access panels in ductwork.
The process
There are three stages on the day: set-up, the treatment itself and the sign-off. Getting ready means protecting surfaces and switching off what needs to be off, while signing off means the written report and photos. The middle part takes longest, and that takes a few hours for most repairs, longer for a full fan replacement. Somewhere like Shalfleet, lanes, gates and parking are worth mentioning in advance.
- You describe the fault and we arrange a visit.
- On site, the fan is safely isolated.
- We diagnose the fault, checking the controls as well as the fan.
- You get a fixed price for putting it right.
- The work is done and the fan is tested running.
Getting ready for the visit
- Move anything stored near the system
- Tell us where we can park and unload
- Tell us about site rules, permits or sign-in
Getting a quote
There’s no standard price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, and then give you a fixed quote. To start, give us a ring on 0345 646 2711 or email us.
Related advice
What affects the cost of extract fan repair
Sites vary more than people expect. The main factors:
- Whether we need access equipment or extra panels
- Travel, parking and unloading
- When the work can happen, such as evenings, overnight or weekends
- A single visit or a regular plan
What you pay reflects the actual work. That is why we survey first, from photos or on site, and why the quote is fixed before work begins.
What we need to know
You do not need the technical terms. Just send:
- Any previous report or certificate
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Wide pictures of the system and the area around it
- Where the site is and what kind of site it is
The quickest way to a quote is to send pictures: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and we can price many jobs without a visit.
Between visits
After the visit, a few habits help the work last:
- Report new noises from the fan early
- Don’t turn the fan down to hide a noise
- Keep the grease filters clean and fitted
- Keep all filters fitted while cooking
We run the fan and check it’s steady before we go. You will hear what we found and what we did, and anything else we noticed is pointed out.
The fan is part of every full TR19 clean. A clean impeller stays in balance, so planned cleaning helps the fan last.
What the work involves, part by part
Fan controls
Every fan has controls, from a speed controller to an isolator. A control fault can leave the fan dead or stuck at one speed.
Impellers and housings
A damaged or corroded impeller can’t simply be cleaned. It may need replacing, or the fan may need replacing as a whole.
For landlords and multi-site operators
Whether it’s one building or many, you get the same standard: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we’re happy to quote for all of it.