Isle of Wight · Extract fan repair and replacement
Havenstreet extract fan repair
Extract fan repair across Havenstreet and nearby, timed so the site keeps working and finished with a written report and pictures.
- A knocking noise from the extract fan
- A motor that trips out or overheats
- A dead fan motor
Extract fans in Havenstreet
Sea air reaches Havenstreet, which sits within about 3 miles of the coast. Near the sea, fans mounted outdoors corrode faster, and corroded fans tend to get noisy before they fail. Look up Havenstreet on the FSA’s food hygiene register and you will find about 4 restaurants, cafés and canteens and about 3 takeaways and sandwich shops within roughly a mile and a half of the centre of Havenstreet. For any of them with a canopy, the extract fan is what keeps the kitchen usable. It’s Isle of Wight council that sends environmental health officers to food businesses in Havenstreet. A kitchen with no working extract can fall short of the suitable and sufficient ventilation food hygiene rules expect. Getting the fan running again is the priority.
If you run a church or community hall kitchen, near St. Peter's Church or elsewhere in Havenstreet, an extract fan that rarely runs can seize or fail when it’s needed. If you manage a school such as Ryde Academy and the kitchen fan is getting louder, the next break is the time to deal with it.
Havenstreet is about 2 miles south-west of Ryde, in the Isle of Wight. Havenstreet gets the same approach as every site we work on: diagnosis first, a fixed price, out-of-hours working where necessary and a written report with pictures. Across the Isle of Wight, we cover 125 places, and Havenstreet is one of them. We also work in Portsmouth, around 9 miles away.
Work in PO33 is surveyed, quoted and booked the same way as anywhere else. We cover sites on Church Road, Elizabeth Gardens and Church Lane and the roads around them. Nearby, we also carry out extract fan repair in Fishbourne (1 mile north), Wootton (2 miles north-west), Hillgrove (2 miles west), Staplers (3 miles west) and Fairlee (3 miles west). Larger places within reach include Newport (4 miles west), Cowes (6 miles north-west), Sandown (4 miles south-east), Shanklin (6 miles south), Ventnor (8 miles south) and East Cowes (5 miles north-west). Remote and island sites need a little more planning, so please mention your location when you phone us on 0345 646 2711 or use the quote form.
Near you in Havenstreet
Typical jobs here are in premises near White Hart Inn, among other places. The closest station to Havenstreet is Smallbrook Junction station, roughly 2.2 miles east of the centre. A little further out are The Donald Mcgill Museum (2.4 miles north-east) and Sandown Castle (4.4 miles south-east). Green spaces nearby include Briddlesford Nature Reserve and Brading Down.
Extract fan repair for kitchens and businesses in Havenstreet
Before anything is ordered, we diagnose. We look at the motor, the belts or direct drive, the impeller and the mountings, along with the fan’s controls. Then you are given a fixed quote for the repair or the replacement. If you’re dealing with an overheating extract motor and a belt-driven fan that squeals, we can put it right, from fan housings, roof and wall fans and bearings onwards.
A callout to a small place like Havenstreet goes better when we know what we are looking at: a photo of the fan, the details on its label and the access arrangements help us plan.
It’s worth checking any contractor’s accreditations. We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, with full insurance on top.
- Location
- Havenstreet (PO33)
- Wider area
- Isle of Wight
- Paperwork
- Report and photos after the visit
- Quote
- A fixed price before we start
- Working hours
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Checked
- 30 October 2026
How the visit works
We start by comparing what we find with the survey or your pictures. Anything unexpected is raised with you before we go further. After that, the work takes a few hours for most repairs, longer for a full fan replacement. The timing of a visit to Havenstreet is set by you, and the travel is our side of the planning.
- We agree a time to attend, out of hours if needed.
- The extract is switched off and the fan opened up.
- We inspect every moving part and the fixings.
- We explain the options and quote a fixed price.
- The fan is repaired or replaced, then checked running.
Preparing for the visit
- Let us know about permits to work or site inductions
- Plan for cooking equipment or plant to be off before we arrive
- Have your last certificate or report to hand
Get a fixed quote
For a fixed quote, give us a ring on 0345 646 2711 or email us with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. You will usually have a quote within one working day.
Read more
What happens if it’s left?
A noisy fan rarely fixes itself. Bearings that are left to wear can fail suddenly and the fan may stop when you are busiest. Sorting it while it still runs is far easier to plan. It’s simpler to plan the work at Havenstreet now than to arrange it in a hurry later.
Several systems or sites on one quote often makes better use of the time. Mention every system or site you need covered, and you’ll get one fixed quote.
Why book with us
- A single point of contact for sites across the South East and London
- Fixed quotes from a survey or pictures
- Full insurance on every job
- Every job surveyed first
Take a look at our cost guide or our accreditations.
In-house cleaning or a specialist?
For ventilation and air handling systems, in-house care is mostly about checks: keeping grilles clear, noting unusual noise or smells and logging filter changes. The inside of ducts and units needs a specialist.
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. That is our job.
Places near Havenstreet
Also in Havenstreet
Multi-site and managed buildings
From a single site to a large estate, you get the same standard: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
Records are where multi-site compliance often slips. Every visit ends with a dated report and photos, ready to show insurers, fire officers or EHOs.
When it’s something else
We won’t sell you work that doesn’t address the problem, so these are the things it will not cover:
- A greasy canopy and duct that a fan repair won’t touch
- Faults on the gas side of an interlock system, which need a Gas Safe registered engineer
- Ductwork designed too small for the kitchen’s cooking
Not sure which it is? You can call us on 0345 646 2711, or email photos and we’ll tell you honestly.
What the work covers
- Kitchen extract fans
- Belts and pulleys
- Fan housings
- Bearings
- Roof and wall fans
- Fan motors
FAQs for Havenstreet
Can the work in Havenstreet be done at night or at weekends?
Yes, we can come after you close and finish before you open. The site is handed back ready to open. Tell us your opening hours when you ask for a quote.
Does coastal air change anything about extract fan repair in Havenstreet?
It can. Being within about 3 miles of the sea means more corrosion on metalwork in Havenstreet than inland. We look at fans, cowls and fixings for rust as well as grease.
Are you insured?
Yes. Full insurance covers our work and have been trading since 2009.
Can you supply and fit a replacement fan?
We can. We fit replacement fans as well as repairing old ones, and we will explain the options.
How much time does a fan repair need?
Typically, a fan repair takes part of a day for most faults, with a return visit if parts have to be ordered. Where parts need ordering, we will explain the timescale.
Do you offer emergency callouts?
Yes, any time. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line, and we will advise on what to do next.
Is it worth cleaning the extract while you are fixing the fan?
Repairing the fan doesn’t clean the canopy or ducts. Grease on the fan normally means grease in the ducts and we can plan the two together.
Which records should we keep?
Each report and certificate we give you, filed in the maintenance log, along with your own cleaning log. BESA says certificates should show the date, location and technician.
Looking after it afterwards
Think of this as the after-treatment advice, short and simple:
- Report new noises from the fan early
- Get a noisy fan checked rather than slowed down
- Never run the extract with filters missing
- Keep the emergency number where staff can see it
Once the fan is running smoothly, keep the filters clean. The less grease that reaches the fan, the longer its parts last and the quieter it runs.
A slipping belt or a loose mount is a small job. Ignored, they can lead to bigger failures, so it’s worth acting early.
What affects the cost of extract fan repair
Your quote is based on your site. We consider:
- The times the site is available
- How many systems or sites are involved
- Whether it’s a one-off visit or part of a schedule
- The size of the system
Every site is different, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all play a part.
Asking for a quote
Many jobs can be priced from pictures and some basics. Useful things to send:
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- A few general shots of the system
- Any access panels or hatches you can see
- How we’d reach plant on a roof or in a plant room
Quoting starts with a diagnosis, from your pictures and details or, where that is not enough, a survey on site. Then we send a fixed price so you know the cost before work begins.