Isle of Wight · Extract fan repair and replacement
Extract fan repair and replacement in Gunville, Isle of Wight
Repair and replacement of kitchen extract fans, fan motors and worn fan parts in Gunville, surveyed first and signed off with a written report and pictures. Ask us for a fixed quote.
- A fan rattling in its housing
- Poor airflow at the canopy
- A dead fan motor
What extract fan repair cannot fix
We’ll always give you a straight diagnosis, so here’s what extract fan repair won’t do:
- Grease throughout the ductwork, which needs a full TR19 clean
- Gas interlock faults that a Gas Safe registered engineer must deal with
- Odour complaints that need filtration rather than a fan repair
Not sure which it is? You can call 0345 646 2711, or send details by email and we’ll tell you honestly before you book.
What the work covers
- Fan housings
- Belts and pulleys
- Roof and wall fans
- Kitchen extract fans
- Fan motors
- Bearings
About our extract fan repair in Gunville
Grease and fans don’t mix. A coated impeller spins unevenly and the vibration wears out bearings and fixings. That is why we check the grease whenever we work on a fan, and a full TR19® clean can be booked alongside. Typical jobs include a belt-driven fan that squeals and an extract fan that rattles or knocks, across belts and pulleys, fan motors and bearings.
In a village or hamlet like Gunville, the kitchens with extract fans are few, wherever there are any. A failed fan stops the kitchen, and our 24/7 emergency line covers rural addresses too.
Think of the report as the system’s health record: dated, with pictures, and showing what was done. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal, ready for your insurer.
- Location
- Gunville (PO30)
- Region
- Isle of Wight
- Paperwork
- Report and pictures after the visit
- Quote
- Fixed quote, usually within a working day
- When we work
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
Fixed quotes for extract fan repair in Gunville
Sites vary more than people expect. The main factors:
- How many systems or sites are involved
- What state the system is in
- How big the system is
- A single visit or a regular plan
You will not find a price list here, because the cost depends on the site in front of us. For a fixed quote, ring 0345 646 2711 or email us, and we’ll explain what it covers.
Asking for a quote
You don’t need the technical terms. Just send:
- The paperwork from the last visit, if you have it
- A few general shots of the system
- The roof, plant room or outside wall the system runs to
- Any access panels or hatches you can see
Getting a quote does not take long. Send a few details and pictures, and we usually reply with a fixed quote within one working day. Where a survey is needed, we arrange a time that suits the site.
When to call us in Gunville
Kitchen extract fans in Gunville face the same conditions as anywhere else: heat, grease, steam and long running hours. Moisture can rust housings and fixings and eventually any fan simply wears out.
Any of these means the system needs a check-up:
- A failed fan that needs a replacement
- A dead fan motor
- A squealing belt on start-up
- A motor that trips out or overheats
For school kitchens, at schools like Carisbrooke College for example, a planned fan repair in the holidays avoids losing lunches in term time.
Comparing quotes
- Exactly which parts of the system are covered
- Which accreditations they hold, and whether you can check them
- Whether the quote is based on a survey or photos
- Whether the work can be done while the site is closed
Extract fans in Gunville
Look up Gunville on the FSA’s food hygiene register and you’ll find about 51 restaurants, cafés and works canteens and about 20 sandwich bars and takeaways within roughly a mile and a half of the centre of Gunville. For any of them with a canopy, the extract fan is what keeps the kitchen usable. It’s Isle of Wight council that sends environmental health officers to food businesses in Gunville. A kitchen with no working extract can fall short of the suitable and sufficient ventilation food hygiene rules expect. Getting the fan running again is the priority.
A fan that rarely runs, like one in a hall kitchen near St. Mary's Church or elsewhere in Gunville, can seize between uses.
Gunville is about 1 mile west of Newport, in the Isle of Wight. Sites in Gunville get the same service as everywhere we cover: diagnosis first, a fixed price, out-of-hours working where needed and a written report with pictures. We cover 125 places across the Isle of Wight, large and small. For sites nearby, see our Portsmouth page, about 13 miles away.
All of PO30 is within our area for extract fan repair, from the main roads to the quietest streets. Whether your site is on Ash Lane, Purdy Road and Gunville Road or anywhere close by, we can help. Other places close to Gunville include Carisbrooke (1 mile south), Clatterford (1 mile south), Plaish (1 mile south), Bowcombe (1 mile south-west) and Gatcombe (2 miles south). Further out, we also cover Ryde (7 miles east), Cowes (4 miles north), Sandown (8 miles south-east), Shanklin (8 miles south-east), Ventnor (9 miles south-east) and East Cowes (4 miles north-east). Remote and island sites need a little more planning, so please mention your location when you ring 0345 646 2711 or email us.
Around Gunville
In Gunville, that means kitchens and buildings near Seaclose Park, Carisbrooke Church of England Controlled Primary School and The Waverley pub, among other places. Well-known places in the area include St Mary's Hospital (1.2 miles north-east) and Carisbrooke Castle (0.8 miles south-east). The countryside around Gunville includes Briddlesford Nature Reserve and Mill Hill.
Questions from Gunville
Do you work in villages like Gunville?
Yes, Gunville is part of our area, however small the site. A survey first, from photos or a visit, means we arrive with the right kit.
Is there an emergency callout for extract fans in Gunville?
Gunville is covered, and our emergency callout runs 24/7. Phone 0345 646 2711 and we’ll talk through the fault and access. A photo of the fan’s rating plate helps.
Which accreditations do you hold?
We hold CHAS, SafeContractor and ISO 9001, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
What causes a noisy extract fan?
It can be one of a few things, including bearings, belts, grease and mounts. The safest step is a proper diagnosis before it leads to a breakdown.
Do we need to close while you work?
Not typically. The area we are working in has to be out of use while we are there, so the visit goes in a quiet slot.
What is TR19?
TR19® is BESA’s specification for ventilation hygiene. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
How much does an extract fan repair cost?
We price each job after finding the cause. Repair, parts or a full replacement all cost differently, so ring 0345 646 2711 or email us and we will arrange a diagnosis.
Do you recommend a next date?
Yes. The interval depends on how much the system is used and what we find and the report sets out why.
Nearby places to Gunville
Other services in Gunville
What happens if it’s left?
Fan noise tends to get worse, not better. Bearings that are left to wear can fail suddenly and the fan may stop when you’re busiest. A repair booked now is simpler than an emergency later. Somewhere as small as Gunville, losing a kitchen or building to a fault is felt by everyone who uses it.
The cost depends on how big the system is, what state it’s in and access to every part of it. We give you a fixed price before work begins, so there are no surprises.
Why book with us
- A written report with pictures after each visit
- Accredited under CHAS and SafeContractor, with ISO 9001
- Trading since 2009
- Survey first, then a fixed quote
What we do, step by step
There are three stages on the day: getting the area ready, doing the work and signing it off. Getting ready means protecting surfaces and switching off what needs to be off, while signing off means the written report and pictures. Most of the time goes on the work itself, and that takes a few hours on site, depending on the fault and the access to the fan. In a small place like Gunville, the journey is planned ahead and the visit arranged around the site’s hours.
- We start with the symptoms, such as rattling, humming, slow running or a fan that will not start.
- The fan is isolated and opened up so we can see inside.
- We check the motor, bearings, drive, impeller and mountings.
- You hear what’s wrong and what it will cost, with a fixed quote, before we go ahead.
- Once the work is done, we run the fan and check it’s steady and quiet.
Preparing for the visit
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Clear loose items from the work area
- Allow time for equipment near the work to be turned off and cool down
Get a fixed quote
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Read more
Between visits
Here’s the after-treatment advice, in brief:
- Make sure staff know who to call if the fan fails
- Make sure the isolator and controls are easy to reach
- Don’t wait for a noisy fan to stop
- Clean or change filters on schedule
Where parts need ordering, we explain what that means for the kitchen until we return. The fan is completed on a return visit at a time that suits your service.
A slipping belt or a loose mount is a small job. Ignored, they can lead to bigger failures so early attention pays.
Multi-site and managed buildings
For anyone managing more than one site, we can schedule visits across all of them on one quote. Each site gets its own report and photos, so each one has its own record.
Whether it’s one building or many, you get the same standard: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.