West Sussex · Extract fan repair and replacement
Extract fan repair and replacement in Furnace Wood, West Sussex
Extract fan repair for Furnace Wood, from a team that has been trading since 2009. Evenings, overnight and weekends, plus a 24/7 emergency line.
- Vibration spreading from the fan into the ducts
- A fan rattling in its housing
- An overheating extract motor
About our extract fan repair in Furnace Wood
Extract fan repair starts with a diagnosis. Noise can come from grease on the impeller, worn bearings or a slipping belt; a dead fan can point to the motor or its controls. You hear what we have found before any work goes ahead. If you have an overheating extract motor and a fan that whines, hums or grinds, we can put it right, from belts and pulleys, fan housings and bearings onwards.
In a village or hamlet like Furnace Wood, the kitchens with extract fans are few, wherever there are any. When one fails, the cooking stops, and emergency callout is available 24/7, villages included.
Insurers, fire officers and environmental health officers all look at records. That is why every job is written up in a report with pictures, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Where
- Furnace Wood (RH19)
- Wider area
- West Sussex
- Records
- Photo report after every visit
- Quotes
- Fixed quote, normally within a working day
- Working hours
- Out of hours as standard, 24/7 emergency line
- Telephone
- 0345 646 2711
- Last updated
- 30 October 2026
How the job changes from site to site
Direct-drive fans
Grease on the impeller unbalances a direct-drive fan quickly. Cleaning it can cure the noise as long as the bearings are still sound.
Impellers and housings
Grease settles inside the fan housing as well as on the blades. We check both, and cleaning can form part of the repair.
Keeping the system healthy
Results last longer with the right care. We suggest:
- Never run the extract with filters missing
- Note when the fan trips or cuts out
- Keep the emergency number where staff can see it
- Get a noisy fan checked rather than slowed down
Your kitchen can get back to normal as soon as the fan is running. We leave the area tidy and talk you through what we found.
A fan that is starting to make noise is giving you a warning. Getting it checked now means a planned repair rather than an emergency during service.
Towns and villages near Furnace Wood
What else we do in Furnace Wood
Extract fans in Furnace Wood
The FSA’s food hygiene register shows about 8 restaurants, cafés and canteens in Furnace Wood and the streets around it, up to about 1.5 miles out. For any of them with a canopy, the extract fan is what keeps the kitchen usable. At about 25 miles from central London, Furnace Wood sits well inside the area we cover. We work evenings, overnight and at weekends, so the visit fits around the site. Environmental health officers from Mid Sussex council inspect food businesses in Furnace Wood. Ventilation is part of food hygiene law, which expects it to be suitable and sufficient. That makes a fan repair urgent rather than something to put off.
Holidays are the time to replace a tired kitchen fan at schools such as Felbridge Primary School, rather than mid-term. Around Furnace Wood, a failed fan can be reported day or night on our 24/7 line.
Furnace Wood is about 3 miles west of East Grinstead, in West Sussex. Sites in Furnace Wood get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with pictures. Our area takes in 371 places across West Sussex, large and small. Our Brighton page covers sites nearby, about 21 miles away.
We cover every part of the RH19 postcode area for extract fan repair and the roads nearby. We cover sites on Lake View Road, Felcot Road and Furnace Farm Road and the roads around them. Other places close to Furnace Wood include Domewood (1 mile north-west), Snow Hill (1 mile west), Felbridge (1 mile east), Crawley Down (1 mile south) and Newchapel (2 miles north-east). Larger places within reach include Crawley (6 miles west), Horsham (12 miles south-west), Haywards Heath (10 miles south), Burgess Hill (13 miles south), East Grinstead (3 miles east) and Broadfield (7 miles south-west).
Around Furnace Wood
Around Furnace Wood, our work takes us to kitchens and buildings near Imberhorne School and the streets around them. Furnace Wood’s nearest station is East Grinstead station, roughly 2.5 miles south-east of the centre. Well-known places in the area include Effingham Park Motor Museum (0.9 miles west) and Queen Victoria Hospital (3.1 miles east). The countryside around Furnace Wood includes Hedgecourt Lake.
What happens on the day
Our technicians bring everything the work needs, from protective sheeting to tools and access equipment. You only need to give us clear access and switch off what needs to be off. The visit takes a few hours for most repairs, longer for a full fan replacement. Pictures of the system and its access let us plan the work in Furnace Wood before we set off.
- We agree a time to attend, out of hours if needed.
- We isolate the extract and open the fan housing.
- Bearings, drive, impeller, motor and mounts are inspected.
- You hear whether repair or replacement makes sense, with a fixed quote.
- The fan is repaired or replaced, then checked running.
Preparing for the visit
- Let us know when the site is closed or quiet
- Mention any parking or loading restrictions
- Let us know how we reach the system, including roofs, risers and plant rooms
Ask for a quote
Want a quote for extract fan repair? Please call 0345 646 2711, or email photos and tell us about the site. We will explain what we’d do and send a fixed quote before you commit to anything.
Advice
When it’s something else
We’ll always give you a straight diagnosis, so here’s what this work can’t put right:
- Problems with the gas supply or its interlock valve
- Smells from the discharge that need odour control equipment
- Faults in the building’s electrical supply, which need an electrician
If in doubt, call us on 0345 646 2711, or send details by email and we’ll say what we think before booking.
What the work covers
- Bearings
- Fan motors
- Belts and pulleys
- Roof and wall fans
- Fan housings
- Kitchen extract fans
Furnace Wood: your questions answered
Can you come to Furnace Wood after we close?
Yes, we can come after you close and finish before you open. It means the site in Furnace Wood keeps running as normal. Your opening times are the first thing we ask for.
Which council inspects kitchens in Furnace Wood?
Kitchens in Furnace Wood are inspected by Mid Sussex council’s environmental health officers. Inspections are risk-based, so a visit can come at any time, including the week a fan stops.
Does the report say when we need you again?
Yes. The recommended date is on the report. BESA’s minimum intervals for kitchen extracts range from 3-monthly for heavy use to 12-monthly for light use, and fire dampers need testing at least once a year.
What happens if you cannot reach some of it?
We never leave them off the paperwork. The report says which parts couldn’t be reached and why, along with a quote to put access in.
Do you survey before quoting?
Yes, always. We diagnose before we treat: the survey shows what needs doing and what access we need and the fixed quote is built on it.
Do you have a 24/7 line?
Yes, any time. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line and we will talk you through the next steps.
Do you cover Furnace Wood?
Yes. Furnace Wood is part of the area we cover, within the South East and London area we cover.
Does the law say we must follow TR19?
No. TR19® is BESA’s specification, not legislation. The law is the Regulatory Reform (Fire Safety) Order 2005, which makes the responsible person assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
How we price extract fan repair
You will get a fixed price before we start. It’s based on:
- Whether several sites go on one quote
- Parking and loading at the site
- Whether it’s a one-off visit or part of a schedule
- Site rules, permits and inductions
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Call for a fixed quote and we will explain each part.
What we need to know
Many jobs can be priced from pictures and some basics. Useful things to send:
- The postcode and the type of business
- Photos showing the whole system and its surroundings
- The roof, plant room or outside wall the system runs to
- Any access panels or hatches you can see
Some systems can be priced from photos; others need a survey. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, the quote is fixed before any work is booked.
Leave it or put it right?
Fan noise tends to get worse, not better. Bearings that are left to wear can fail suddenly and the fan may stop when you’re busiest. Sorting it while it still runs is far easier to plan. In a small place like Furnace Wood, a system that fails can take a site out of use.
You won’t find a price list here, because the cost depends on the site in front of us. Call for a fixed quote, and we’ll explain what it covers.
Why Furnace Wood businesses choose us
- One number for every site across the South East and London
- We diagnose before we treat
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- Accredited under CHAS and SafeContractor, with ISO 9001
Take a look at how cleaning jobs are priced or our accreditations.
Multi-site and managed buildings
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We can quote either party, and the report can go to both.
Running several sites is easier with one contractor. We cover South East England and London, so visits at different addresses can be planned together and kept on a regular cycle.