Kent · Extract fan repair and replacement

Extract fan repair and replacement in Densole, Kent

Professional extract fan repair in and around Densole, booked around your opening hours and signed off in writing with pictures.

  • A fan shaking on its mountings
  • An extract fan that has stopped working
  • A fan rattling in its housing

Extract fan repair for sites in Densole

What extract fan repair cannot fix

We won’t sell you work that doesn’t address the problem, so here are the limits:

  • Faults on the gas side of an interlock system, which need a Gas Safe registered engineer
  • Grease throughout the ductwork, which needs a full TR19 clean
  • Smells from the discharge that need odour control equipment

Not sure which it is? You can call us on 0345 646 2711 or email us and we will tell you honestly.

What the work covers

  • Bearings
  • Roof and wall fans
  • Fan housings
  • Belts and pulleys
  • Kitchen extract fans
  • Fan motors

Extract fan repair in Densole, done properly

Grease and fans don’t mix. Deposits on the impeller throw it out of balance and the vibration wears out bearings and fixings. So when we repair extract fan, we look at the grease too, and a full TR19® clean can be booked alongside. We’re often asked to deal with a fan that whines, hums or grinds and a motor that trips out or overheats, on fan housings, belts and pulleys and roof and wall fans.

For a fan repair in or near Densole, the more you tell us about the fan, the better the first visit: photos of the fan, its rating plate and how to reach it all help.

Duct Doctor has been trading since 2009, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we carry full insurance.

Location
Densole (CT18)
Wider area
Kent
Records
Photo report after each visit
Price
Fixed quote, usually within a working day
When we work
Out of hours as standard, 24/7 emergency line
Telephone
0345 646 2711
Page updated
30 October 2026
Duct Doctor duct and vent cleaning vans lined up in a car park with the team

Managing agents and facilities teams in Densole

Managing agents often deal with us directly. Tell us the site, the work and the access arrangements, and we will send a fixed quote.

Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, which may be the employer, owner, landlord, FM or managing agent. Where responsibility is shared, records matter even more.

Why deal with it now?

Wherever the kitchen is, Densole included, the fan often sits on an outside wall or roof, so its noise does not stay in the kitchen. Dealing with the fault brings the noise back down before it becomes a nuisance. Our emergency line runs 24/7, but a planned visit to Densole is calmer for everyone.

Working hours, access and the scale of the site all affect the cost. Each of those is built into the quote, and the price is fixed before work begins.

What you get with us

  • CHAS, SafeContractor and ISO 9001
  • Fully insured
  • A single point of contact for sites across the South East and London
  • Fixed quotes from a survey or pictures

See our cost guide or how to check a contractor.

What extract fan repair looks like in Densole

Food Standards Agency data counts about 6 cafés, restaurants and staff canteens and about 3 sandwich bars and takeaways within about 1.5 miles of central Densole. For any of them with a canopy, the extract fan is what keeps the kitchen usable. Kitchens in Densole get their food hygiene inspections from Folkestone and Hythe council. Food premises are expected to have suitable and sufficient ventilation under food hygiene rules. That makes a fan repair urgent rather than something to put off. At about 60 miles from central London, Densole sits well inside the area we cover. The visit is fixed around your opening hours, not ours.

If you run a school kitchen, at a school such as Hawkinge Primary School or nearby, a fan that is getting noisy is best repaired in the holidays before it fails in term. Hall kitchens near St Luke's, or anywhere around Densole, often use their fans only now and then, and an idle fan can stick.

Densole is about 3 miles north of Folkestone, in Kent. Whether your site is in the middle of Densole or further out, we cover extract fan repair for every kind of premises, from a single unit to a large public building. We cover 922 places across Kent, from busy centres to quieter spots. Maidstone is in our area too, around 29 miles away.

Postcode districts we cover here for extract fan repair: CT18. You’ll find streets such as St John's Close, St John's Way and Canterbury Road, all of which we cover for extract fan repair. We also cover the places around Densole: Hawkinge (1 mile south), Swingfield Minnis (1 mile north), Old Hawkinge (2 miles south-east), Arpinge (2 miles south-west) and Selsted (2 miles north). Further out, we also cover Ashford (13 miles west), Canterbury (11 miles north), Dover (6 miles east), Folkestone (3 miles south), Deal (12 miles north-east) and Hythe (5 miles south-west).

Local landmarks in Densole

The nearest railway station is Folkestone West station, about 3.1 miles south. Other landmarks nearby include Elham Valley Countryside Centre And Railway Museum (2.7 miles south-west) and Folkestone Castle (2.1 miles south). For a walk, there’s Cheriton Hill.

Map of Densole © OpenStreetMap contributors

What happens on the day

There’s very little for your team to do on the day. A contact on site lets us in at the agreed time and points us to the system, and we take it from there. Before we leave, the area is tidied and the paperwork follows. The timing of a visit to Densole is set by you, and the travel is our side of the planning.

  1. We agree a time to attend, out of hours if needed.
  2. We isolate the extract and open the fan housing.
  3. Bearings, drive, impeller, motor and mounts are inspected.
  4. You hear whether repair or replacement makes sense, with a fixed quote.
  5. The fan is repaired or replaced, then checked running.

How to prepare

  • Dig out any earlier paperwork for the system
  • Let us know when the site is closed or quiet
  • Make sure equipment near the work can be switched off and left to cool

Getting a quote

The quickest way to a quote is to send photos: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and we can price many jobs without a visit.

Get a quick quote

Related advice

Part by part

Direct-drive fans

Many kitchen extracts use direct-drive fans. When the motor fails, replacing the whole fan unit can make more sense than repairing it and we will talk you through it.

Roof and wall-mounted fans

Many kitchen extract fans sit on a roof or an outside wall. Access affects how long a repair takes, so we ask about it early.

Between visits

Results last longer with the right care. Here’s what we suggest:

  • Tell us about a new rattle or whine right away
  • Make sure the isolator and controls are easy to reach
  • Get a noisy fan checked rather than slowed down
  • Book regular TR19 cleaning, which includes the fan

Where parts need ordering, we explain what that means for the kitchen until we return. The fan is completed on a return visit outside your busiest hours.

Regular TR19 cleaning includes the extract fan. A clean impeller stays in balance, so planned cleaning helps the fan last.

FAQs for Densole

Can the work in Densole be done at night or at weekends?

Yes, nights and weekends are routine for us. Your customers, staff or residents in Densole needn’t be disturbed. Let us know the hours you’re closed and we’ll book within them.

What if my kitchen extract fan stops in Densole at night?

Our emergency line runs 24/7, and Densole is within the area we cover. Phone 0345 646 2711 and we will talk through the fault and access. Details of the make and model help us plan the repair.

Do you look at the system first?

Yes, every time. We diagnose before we treat: the survey tells us what the system needs and how to reach it, and the quote is based on that.

How much time does a fan repair need?

As a guide, it takes a few hours for most repairs, longer for a full fan replacement. Where parts need ordering, we will explain the timescale.

How much does an extract fan repair cost?

We price each job after finding the cause. Repair, parts or a full replacement all cost differently so the first step is a diagnosis.

Which records should we keep?

Anything that proves the system is maintained: our reports and pictures, any certificates and your in-house logs. One maintenance log per site keeps it simple.

Are you insured?

Yes. Full insurance covers our work and have been trading since 2009.

Why is our extract fan so noisy?

It can be one of a few things, from a worn bearing to a loose fixing. It’s worth having it diagnosed before it leads to a breakdown.

What affects the quote in Densole

The quote reflects the site in front of us. We take into account:

  • When the work can happen, such as evenings, overnight or weekends
  • How many systems or sites are involved
  • Whether it’s a one-off visit or part of a schedule
  • Where the site is and how we reach it

Kitchens, offices, schools and hospitals are all priced the same way: the size of the job, access, condition and working hours. Call for a fixed quote and we will explain each part.

Helping us quote

To speed up the quote, please include:

  • Close-ups of filters, grilles, hatches or access panels
  • Photos showing the whole system and its surroundings
  • Any symptoms, from odd noises to smells or leaks
  • Where the site is and what kind of site it is

Some systems can be priced from pictures; others need a survey. Big or complicated sites, and systems that are hard to see in pictures, get a survey first. Either way, the quote is fixed before any work is booked.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London