Kent · Extract fan repair and replacement
Extract Fan Repair in Burlings
Our technicians work in Burlings on extract fan repair. Fixed quotes, work around your opening hours and photo reports as standard.
- Poor airflow at the canopy
- A fan that keeps cutting out
- A squealing belt on start-up
How we handle extract fan repair in Burlings
Before anything is ordered, we diagnose. We look at the motor, the belts or direct drive, the impeller and the mountings, along with the fan’s controls. After that, you get a fixed price for what’s needed. We’re often asked to deal with an old fan that needs replacing and weak extraction and a smoky kitchen, on fan motors, belts and pulleys and kitchen extract fans.
Somewhere as small as Burlings, a kitchen extract fan might serve a pub, a school, a care home or a hall kitchen. When one fails, the cooking stops, and our 24/7 emergency line covers rural addresses too.
Accreditations are easy to claim and worth checking. Ours are BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001, with full insurance on top.
- Where
- Burlings (TN14)
- Wider area
- Kent
- Records
- Report and pictures after the visit
- Quote
- A fixed quote up front
- Working hours
- Nights, weekends or holidays to suit you
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
Common problems we fix in Burlings
Fan bearings don’t last for ever, especially in a hot, greasy airstream. As they wear, you hear a whine or a rumble, and if they’re left they can seize.
It’s time to book a visit if you see:
- A whining or grinding extract motor
- A fan that keeps cutting out
- A worn or slipping fan belt
- A failed fan that needs a replacement
School kitchens can’t easily serve lunch without extraction, so if you look after one at a school like Charles Darwin School, fix a failing fan before term starts.
What to look for in a quote
- When the next visit should be, and why
- What paperwork you get at the end
- Whether they’re fully insured
- If the quote is a fixed price or an estimate
When a fan fails in Burlings
Food hygiene inspections in Burlings are the job of Sevenoaks council’s environmental health team. Food hygiene rules expect food premises to have suitable and sufficient ventilation. A kitchen without a working fan has a problem to fix quickly. At about 15 miles from central London, Burlings sits well inside the area we cover. Evening, overnight and weekend visits are all possible.
A fan that rarely runs, like one in a hall kitchen near St Katharine's Church or elsewhere in Burlings, can seize between uses.
Burlings is about 5 miles north-west of Sevenoaks, in Kent. Across the TN14 area, we can take on extract fan repair. Our Kent coverage runs to 922 places, and Burlings is one of them. For sites nearby, see our London page (15 miles or so).
Work in TN14 follows the same survey, fixed quote and written report as everywhere else we cover. Nearby, we also carry out extract fan repair in Horns Green (1 mile south-west), Cudham (1 mile north-west), Berry's Green (1 mile west), Single Street (1 mile north-west) and Luxted (2 miles north-west). Larger places within reach include Dartford (11 miles north-east), Sevenoaks (5 miles south-east), Royal Tunbridge Wells (14 miles south-east), Gravesend (15 miles north-east), Tonbridge (11 miles south-east) and Northfleet (14 miles north-east).
Around Burlings
In Burlings, that means kitchens and buildings near The Blacksmith's Arms. The nearest railway station is Knockholt station, roughly 3 miles north-east. A little further out are Orpington Hospital (3.6 miles north). Green spaces nearby include Downe Bank and Betsom's Hill.
What affects the cost of extract fan repair
We don’t publish a price list, because no two systems are the same. What we look at:
- The scale of the work
- Whether it’s a one-off visit or part of a schedule
- Where the site is and how we reach it
- Access, including roofs, risers and ceiling voids
Several systems or sites on one quote often makes better use of the time. Mention every system or site you need covered and we will price it together.
What we need to know
The more you tell us, the more accurate the quote. With your enquiry, please include:
- Wide photos of the system and the area around it
- The times we could work without disrupting the site
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- The site address and the type of premises
Photos are enough for some jobs, while others need a look on site. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, you get a fixed price before work begins.
How the visit works
The visit has three parts: getting the area ready, doing the work and signing it off. Set-up means sheeting and making equipment safe, and the sign-off is a written report with photos. The middle part takes longest, which takes anything from an hour or two to a full visit, depending on the fault. A few photos of the system help us make the most of a visit to a place like Burlings.
- We start with the symptoms, such as rattling, humming, slow running or a fan that won’t start.
- With the fan safely isolated, we open it up for a proper look.
- We check the motor, bearings, drive, impeller and mountings.
- You hear what’s wrong and what it will cost, with a fixed quote, before we go ahead.
- We fix or replace the fan, then test it running before we leave.
Getting ready for the visit
- Tell us about site rules, permits or sign-in
- Dig out any earlier paperwork for the system
- Arrange a key holder or contact on site
Get a fixed quote
Quoting starts with a diagnosis, either from photos and details you send or from a site visit. After that, you get a fixed price for the work so you know the cost before we start.
Read more
Burlings questions
Do you work in villages like Burlings?
Yes. Burlings is within the area we cover across London and the South East. The journey is planned ahead, so a few details about the route help.
Do you work overnight in Burlings?
Yes. We work evenings, overnight and at weekends. That way a site in Burlings doesn’t have to lose a day’s trading. Just give us a ring on 0345 646 2711 or use the quote form with your opening times and we will plan around them.
Do I get a report after the visit?
Yes. It’s the record insurers and inspectors ask to see: a written, dated record with photos of what we did and anything we couldn’t access.
What is TR19?
It’s the industry benchmark for cleaning ventilation and kitchen extract systems, written by BESA. It covers how systems are inspected, cleaned and checked and expects a risk-based approach.
Do you have insurance?
Yes. Full insurance covers our work and have been trading since 2009.
What happens if you can’t reach some of it?
We record them on the report, with photos where possible, and we tell you what would make it reachable, such as extra access panels in ductwork.
Do you have a 24/7 line?
Yes, 24/7. Our office is open from 8am to 6pm on weekdays, with the emergency line covering every other hour.
How much does an extract fan repair cost?
Every fan job is priced once we know the fault. A belt and a new fan are very different jobs, so call us on 0345 646 2711 or use the quote form and we will arrange a diagnosis.
Managing agents and facilities teams in Burlings
We regularly work with managing agents. Tell us the site, the work and the access arrangements and we will come back with a fixed quote.
We also work for facilities teams across offices, schools and healthcare across Kent. Work can be phased by floor, building or site to keep disruption down.
Why deal with it now?
Some kitchens run a noisy fan on a lower speed to cut the noise. It hides the symptom and weakens the extract while the underlying wear continues. A proper diagnosis in Burlings gets to the real cause. Somewhere as small as Burlings, losing a kitchen or building to a fault is felt by everyone who uses it.
What you pay reflects the actual work. That is why we survey first, from photos or on site, and the price is agreed before we start.
Why us?
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- Trading since 2009
- Every job surveyed first
- One number for every site across the South East and London
Read what affects the cost or our accreditations.
What the work involves, part by part
Roof and wall-mounted fans
Fans are often mounted on roofs or external walls. How easy the fan is to reach shapes the job and we plan around it.
Belt-driven fans
Belt drives have more moving parts than direct-drive fans. More parts to inspect, but many faults are straightforward to fix.
Staff cleaning versus specialist work
Keep a record of what your team does. A dated log of in-house cleaning and checks shows an inspector that the system is looked after between visits, alongside our reports.
For ventilation and air handling systems, in-house care is mostly about checks: clear grilles, a log of filter changes and reporting anything odd. Cleaning inside ducts and units is specialist work.