Kent · Extract fan cleaning
Extract fan cleaning in Sandling, Kent
Extract fan cleaning for Sandling, from a team that has been trading since 2009. Evenings, overnight and weekends, plus a 24/7 emergency line.
- A fan that hums, whines or rumbles
- A heavily greased fan housing
- A motor area thick with grease
About our extract fan cleaning in Sandling
A fan never collects grease in a neat, even layer. Uneven build-up unbalances the impeller, leading to vibration, noise and strain on the motor and bearings. A thorough clean removes the cause. Common call-outs are for a noisy fan that has got louder over time and grease stains around the discharge, on discharge points, fan housings and roof-mounted fans.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, and those horizontal sections are where grease settles. Access, parking and timings are agreed before the day.
Think of the report as the system’s health record: dated, with photos, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal and sits alongside the report.
- Where
- Sandling (ME14, ME16, ME20)
- Region
- Kent
- Reporting
- Certificate and photo report
- Price
- A fixed price before work begins
- When we work
- Overnight and weekend work, 24/7 emergency callout
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
Do you need extract fan cleaning in Sandling?
Grease builds up unevenly on the blades. Over time, that imbalance shakes the fan, wearing bearings and mounts. What starts as a grease problem can become a mechanical one.
The symptoms we’re asked about most include:
- Rough running from the extract fan
- Weak extraction at the canopy
- Grease stains around the discharge
- A smell of hot grease from the extract
If you run a church or community hall kitchen, near St Paul's Church or elsewhere in Sandling, its extract still collects grease from every lunch and event.
Questions to ask before booking
- Whether a survey comes first
- How areas they cannot reach will be recorded
- What paperwork you get at the end
- Exactly which parts of the system are covered
Extract fan cleaning in Sandling: the local picture
The FSA’s food hygiene register shows about 58 cafés, restaurants and staff canteens and about 21 takeaways within 1.5 miles or so of the middle of Sandling. Where they cook under a canopy, an extract fan is pulling grease-laden air through its blades every service. Fire safety in Sandling falls to Kent Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract. Environmental health officers from Maidstone council inspect food businesses in Sandling. They look at how clean the premises and equipment are, and the kitchen extract is part of that. A TR19® certificate and photo report after each clean gives you a record to show an inspector.
If your kitchen is in a listed or historic building, like the houses around Sandling (Stoneacre is about 4.2 miles south-east), fitting access panels needs care. Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; KIMS hospital is the nearest hospital to Sandling, about 2 miles south-east.
Sandling is about 1 mile north-west of Foley Park, in Kent. We carry out extract fan cleaning for businesses, landlords and public buildings in Sandling and the rest of Kent. Across Kent, we cover 922 places, and Sandling is one of them.
Extract fan cleaning in ME14, ME16 and ME20 follows the same survey, fixed quote and written report as everywhere else we cover. If you need extract fan cleaning at premises on Lock Lane, Grange Lane and Tyland Lane or anywhere close by, our technicians can take on the work. Main roads around Sandling include the M20, so getting to you is simple for extract fan cleaning. Neighbouring places we cover for extract fan cleaning include Abbey Gate (1 mile north), Ringlestone (1 mile south), Harbourland (1 mile east), Penenden Heath (1 mile south-east) and Foley Park (1 mile south-east). Further out, we also cover Sittingbourne (10 miles east), Sevenoaks (14 miles west), Gravesend (11 miles north-west), Tonbridge (12 miles south-west), Northfleet (12 miles north-west) and Minster (15 miles north-east).
What’s near Sandling
Typical jobs here are in premises near The Yew Tree pub, Tyland Barn and The Maplesden Noakes School and the streets around them. For rail, the closest station is Maidstone East station, roughly 1.4 miles south of the centre. Other landmarks nearby include KIMS hospital (2 miles south-east) and Allington Castle (under half a mile south-west). For a walk, there’s Burham Down and Boxley Hills.
In-house cleaning or a specialist?
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That is our job.
For ventilation and air handling systems, in-house care is mostly about checks: clear grilles, a log of filter changes and reporting anything odd. Cleaning inside ducts and units is specialist work.
What affects the quote in Sandling
The quote reflects the site in front of us. We consider:
- What state the system is in
- The size of the system
- Whether several sites go on one quote
- Parking and loading at the site
The cost depends on the size of the system, the condition it’s in and access to every part of it. We give you a fixed price before we start, so there are no surprises.
What to send for a quote
When you call or email, these details help:
- The site address and the type of premises
- Any previous report or certificate
- The times we could work without disrupting the site
- Where the plant sits or the system leaves the building, such as a roof or outside wall
Quotes are quick. Call or email with a few details and you’ll typically have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
Multi-site and managed buildings
When the building owner and the occupier are different, the lease normally sets out who maintains what. We can quote either party and send the paperwork to whoever needs it.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we are happy to quote for all of it.
What happens on the day
Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. Once we are in, the area is sheeted and anything that has to be off is turned off and cooled, and the work takes a couple of hours per fan, depending on its size and the build-up. Somewhere like Sandling, lanes, gates and parking are worth mentioning in advance.
- Diagnosis first: we look for grease, noise and vibration.
- With the fan isolated, the housing is opened.
- Each blade is cleaned so the impeller runs evenly.
- We clean the casing, the outlet and around the motor.
- The fan goes back into service with a report on its condition.
Preparing for the visit
- Find the previous report, if there is one
- Mention any locked doors, roof access or ceiling voids
- Allow time for equipment near the work to be turned off and cool down
Ask for a quote
There’s no standard price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, and then give you a fixed quote. To start, call us on 0345 646 2711, or email photos.
Related advice
What a clean won’t put right
Not every problem is solved by extract fan cleaning, and we’ll tell you before work begins. It will not put right:
- A cracked or broken impeller (it needs replacing)
- Electrical faults in the fan’s supply or controls (an electrician’s job)
- A fan that is too small for the system (a design question)
If in doubt, call 0345 646 2711, or email photos and we will say what we think before booking.
What the work covers
- Fan housings
- In-line fans
- Discharge points
- Centrifugal fans
- Roof-mounted fans
- Axial fans
Different parts, different methods
Roof-mounted fans
Many kitchen extracts end at a fan on the roof. We clean them where they can be safely reached, and anything we cannot reach is recorded.
Fan housings and motors
The housing around the impeller catches grease flung off the blades. We clean it along with the blades.
Places near Sandling
What else we do in Sandling
Your questions about extract fan cleaning in Sandling
Can the work in Sandling be done at night or at weekends?
Yes, we can come after you close and finish before you open. The work in Sandling can fit around your hours. Your opening times are the first thing we ask for.
Who enforces fire safety at workplaces in Sandling?
It’s Kent Fire and Rescue Service, which covers Sandling. A recent cleaning certificate and a note of the next clean date show that grease in the extract is being managed.
Do you look at the system first?
Yes. Every job is surveyed first, from your pictures and details, or with a visit where necessary. Then you get a fixed quote.
Can you clean the fan on its own?
Yes, we do. We record it as a fan-only clean, so your TR19 records stay accurate. The full system still needs its regular TR19 clean.
How do you protect the area?
We start with protection: sheeting over floors, worktops and anything close to the work. We tidy up and take our waste away before we leave.
Do you have a 24/7 line?
Yes. Our emergency line runs 24/7 for anything that can’t wait until a planned visit. Ring any time and tell us what’s happened.
Is the fan included in a TR19 clean?
Yes, the fan is cleaned as part of TR19. If a fan can’t be reached, the report says so, so the record is accurate.
Do you work with multi-site operators?
Yes. You deal with one contact for every site in our area, and visits can be set on a regular cycle.