Oxfordshire · Extract fan cleaning
Ipsden extract fan cleaning
Extract fan cleaning across Ipsden and nearby, booked around your opening hours and signed off in writing with pictures.
- Grease stains around the discharge
- A fan coated in grease inside its housing
- A fan shaking on its mounts
Grease, kitchens and Ipsden
Kitchens in Ipsden get their food hygiene inspections from South Oxfordshire council. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. A TR19® certificate and photo report after each clean gives you a record to show an inspector. Ipsden, about 43 miles from central London, is within our usual area. Evening, overnight and weekend visits are all possible.
Term dates shape school work: for a school like Langtree School, an extract clean fits neatly into a half-term or summer break. If you run a church or community hall kitchen, near Church of St Mary or elsewhere in Ipsden, its extract still collects grease from every lunch and event.
Ipsden is about 8 miles north-west of Caversham, in Oxfordshire. For extract fan cleaning in and around Ipsden, it’s easy to get a fixed quote: please call 0345 646 2711 or drop us a line. Our area covers London and the South East, Ipsden included. Our Oxfordshire coverage runs to 443 places, and Ipsden is one of them. Reading is in our area too, about 9 miles from Ipsden.
Our technicians cover all of OX10 for extract fan cleaning and the streets around it. If you need extract fan cleaning at premises on The Street, Fir Close and Crabtree Corner or anywhere close by, we can help. Close by, we work in Heath End (2 miles east), Checkendon (2 miles south-east), Woodcote (2 miles south), Nuffield (2 miles north-east) and Stoke Row (3 miles east). Larger places within reach include Oxford (14 miles north-west), Didcot (8 miles north-west), Abingdon-on-Thames (12 miles north-west), Thame (14 miles north), Wantage (15 miles west) and Henley-on-Thames (8 miles east).
Local landmarks in Ipsden
In Ipsden, that means kitchens and buildings near King William IV Public House. The nearest railway station is Cholsey station, roughly 3.3 miles west of the centre. A little further out are Wallingford Castle (3.2 miles north-west). For a walk, there’s Cholsey Marsh.
Extract fan cleaning in Ipsden
Grease on a fan isn’t spread evenly. Heavier deposits on some blades throw the impeller off balance, which brings vibration, noise and extra wear on the bearings and motor. Cleaning the impeller and housing puts that right. The work covers discharge points, centrifugal fans and fan housings, and common reasons people get in touch are burning smells from the fan area and rough running from the extract fan.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, and those horizontal sections are where grease settles. We agree access and timings in advance.
We’ve been trading since 2009, and we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we’re fully insured.
- Location
- Ipsden (OX10)
- Wider area
- Oxfordshire
- Records
- TR19® certificate and photo report
- Quotes
- A fixed quote up front
- Hours
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Last updated
- 30 October 2026
Nearby places to Ipsden
Other services in Ipsden
Ipsden: your questions answered
Which fire and rescue service is responsible for Ipsden?
Oxfordshire Fire and Rescue Service is the fire and rescue service for Ipsden. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
Which council inspects kitchens in Ipsden?
Kitchens in Ipsden are inspected by South Oxfordshire council’s environmental health officers. Ratings are published by the Food Standards Agency, so a clean extract and good records are worth keeping up.
What should I send you?
Only a few details: the address, the site type, your opening hours and how we reach the system. Photos and the last report help too. After that, simply call 0345 646 2711, or email photos.
How much notice do you need?
Book as early as you can for planned work, particularly if your next visit is nearly due. Emergencies are different, because our line is open 24/7.
How do you protect the area?
Protection goes down first: floor sheeting and covers over nearby surfaces and equipment. The area is left tidy, with our waste taken away.
Why is my extract fan noisy?
A common cause is grease. Uneven build-up on the blades throws the fan off balance, causing vibration and noise. If cleaning doesn’t, the bearings or motor may need attention.
Can you clean the fan on its own?
Yes, we can clean just the fan. It’s useful when a fan is noisy or greasy between full cleans, but it does not replace a full TR19 clean.
Can the work be done while we’re closed?
Yes. Give us your opening hours with your enquiry and we will book around them.
When it’s something else
Some problems need a different service or another trade:
- An undersized fan that can’t cope
- A faulty speed controller or isolator
- A cracked or broken impeller (it needs replacing)
If in doubt, call 0345 646 2711 or drop us a line and we will say what we think.
Parts of the system we cover
- Axial fans
- In-line fans
- Discharge points
- Fan housings
- Centrifugal fans
- Roof-mounted fans
Why act early in Ipsden
Cleaning the fan in Ipsden now is a short job: it takes a couple of hours per fan, depending on its size and the build-up. Waiting adds vibration, wear and a harder clean. A planned visit to Ipsden is easier to arrange than an emergency callout.
Working hours, access and the scale of the site all affect the cost. We take each of them into account and give you a fixed price before any work starts.
Why us?
- CHAS, SafeContractor and ISO 9001
- One contact for all your sites in London and the South East
- Survey first, then a fixed quote
- A written report with pictures after every visit
See our cost guide and how to check a contractor.
How we price extract fan cleaning
Some jobs are bigger than they look, and some smaller. What affects the quote:
- The size of the system
- Travel, parking and unloading
- Any permits to work or inductions
- When the work can happen, such as evenings, overnight or weekends
We don’t list prices on the website, because each job is priced on what it involves. Call for a fixed quote, and we will talk you through it.
Helping us quote
Many jobs can be priced from pictures and some basics. Send what you can of the following:
- Problems your staff have spotted
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Photos showing the whole system and its surroundings
- The site address and the type of premises
The quickest way to a quote is to send pictures: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and many jobs can be priced from that alone.
Multi-site and managed buildings
Whether it’s one building or many, you get the same standard: a survey first, a fixed quote, the work timed around the site and a report with pictures.
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we’re happy to quote for all of it.
When to call us in Ipsden
Poor filters mean a greasier fan. When filters do not seal, grease goes straight through to the fan, so the fan takes far more than it should.
Look out for any of the following:
- A heavily greased fan housing
- A fan that hums, whines or rumbles
- Burning smells from the fan area
- Grease around the motor and its mounts
Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Basildon Park is about 4.7 miles south), access may need planning.
Questions to ask before booking
- If they look at the system before pricing
- When they can work, and whether that’s outside your opening hours
- If the quote is a fixed price or an estimate
- Whether VAT is included
The process
When we arrive, we check the system against the survey or the pictures you sent. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes an hour or two for most single fans. Pictures of the system and its access let us plan the work in Ipsden before we set off.
- Diagnosis first: we look for grease, noise and vibration.
- Once isolated, we open the fan up.
- Each blade is cleaned so the impeller runs evenly.
- We clean the casing, the outlet and around the motor.
- We run the fan and note its condition in the photo report.
Before we arrive
- Make sure equipment near the work can be switched off and left to cool
- Dig out any earlier paperwork for the system
- Let us know how we reach the system, including roofs, risers and plant rooms
Get a fixed quote
For a fixed quote, call us on 0345 646 2711, or send details by email with the site type, your trading hours and a short description of the system. A few photos and your last certificate or report help a lot. We normally come back within one working day.
Read more
Part by part
Inline duct fans
Inline fans sit within the duct run, often above a ceiling. We get to them through the duct or casing after isolating them.
Fan housings and motors
Some fans use a belt drive. We clean around them and note any wear for your records.