Kent · Extract fan cleaning
Highstreet extract fan cleaning
Extract fan cleaning for Highstreet and the surrounding area: diagnosis first, then a fixed quote, the work and a report with photos. Ask us for a fixed quote.
- An extract fan that vibrates or rattles
- Rough running from the extract fan
- Fat spreading onto the roof or wall by the fan
Your questions about extract fan cleaning in Highstreet
Does coastal air change anything about extract fan cleaning in Highstreet?
It can. Highstreet is within about 2 miles of the coast, and salt air speeds up corrosion. Corroded fixings and housings are noted on the report so they can be dealt with.
Who enforces fire safety at workplaces in Highstreet?
Kent Fire and Rescue Service is the fire and rescue service for Highstreet. TR19® isn’t law, but it’s the benchmark many fire officers and insurers look to when they ask how often the extract is cleaned.
Does the law say we must follow TR19?
No, not in itself. TR19® is the benchmark insurers, fire officers and EHOs check against, and many insurance policies ask for proof of TR19® cleaning. The law behind it is the Fire Safety Order 2005, which applies in England and Wales.
Is it safe to clean the fan while the kitchen is open?
With the fan isolated, the extract isn’t running. We work evenings, overnight or weekends, and the kitchen is ready when we leave.
Do you survey before quoting?
Yes. Every job is surveyed first, either from photos and details you send or on a site visit. A fixed quote follows.
How far ahead should we book?
That depends on the slot you want and the size of the job. Mention your preferred dates with your enquiry, and if it’s an emergency, call us any time.
Do you offer extract fan cleaning separately?
Yes, where it makes sense. A coated fan often means the duct before it is coated too, but the choice is yours.
What paperwork do I get after a fan clean?
Every clean has a photo report, with anything we noticed. A full clean adds a TR19 certificate from the BESCA Vent Hygiene Elite portal.
About our extract fan cleaning in Highstreet
Every TR19® Grease clean includes the extract fan, but some fans need cleaning between full cleans, especially when it has started to vibrate or sound rough. A fan-only clean is recorded as exactly that. Common call-outs are for fat spreading onto the roof or wall by the fan and a fan left out of previous cleans, on fan housings, axial fans and centrifugal fans.
In a small place like Highstreet, kitchens are often in older or extended buildings, with long single-storey duct runs, where grease settles in the flat sections. Access, parking and timings are agreed before the day.
We have been trading since 2009, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we carry full insurance.
- Place
- Highstreet (ME13)
- Wider area
- Kent
- Records
- TR19® certificate and photo report
- Quotes
- Fixed quote, usually within a working day
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
What the work involves, part by part
Inline duct fans
An inline fan can be easy to forget because it’s out of sight. The survey makes sure it’s part of the clean.
Impellers and blades
The blades of the impeller do the work, and grease builds up on them unevenly. That’s what unbalances the fan, so it’s cleaned carefully blade by blade.
For landlords and multi-site operators
Whether it’s one building or many, you get the same standard: a survey first, a fixed quote, the work timed around the site and a report with photos.
Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We are happy to deal with either side and send the paperwork to whoever needs it.
When to call us in Highstreet
How fast a fan gets greasy in Highstreet depends on the cooking: how many hours a day the kitchen runs and what it cooks. BESA guidance sets minimum intervals of 3, 6 or 12 months for the whole system by daily use.
Signs it’s time to call us include:
- Grease stains around the discharge
- A fan that has never been cleaned
- Weak extraction at the canopy
- An extract fan that vibrates or rattles
If you run catering at a healthcare site, such as a hospital like Whitstable and Tankerton Hospital about 3.6 miles north-east, the extract may need cleaning more often than a part-time kitchen.
Comparing quotes
- What records you will receive afterwards
- What insurance they carry
- How they set the interval to the next visit
- How areas they can’t reach will be recorded
Why it’s worth doing now in Highstreet
Grease on the impeller makes the fan less efficient. Airflow at the canopy drops and the kitchen gets hotter and smokier, while the motor runs under more strain. It’s worth booking a check, because nobody sees inside a duct day to day.
Kitchens, offices, schools and hospitals are all priced the same way: how much there is, how we reach it, what state it’s in and when we can work. Call for a fixed quote and we will go through it with you.
Why book with us
- Photo reports with every job
- Survey first, then a fixed quote
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- A fixed price before any work starts
Take a look at how cleaning jobs are priced and our accreditations.
Staff cleaning versus specialist work
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. Leave those to us.
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but the parts you can’t see still need a specialist at the right interval.
Kitchen extracts in Highstreet
At about 2 miles from the coast, Highstreet is close enough for sea air to matter. Near the sea, the fan and discharge at the top of a kitchen extract corrode faster than they would inland. The FSA’s food hygiene register includes about 4 pubs, bars and clubs within 1.5 miles or so of the middle of Highstreet. Breakfasts, bar meals and functions all put grease into the extract wherever they’re cooked. It’s Swale council that sends environmental health officers to food businesses in Highstreet. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. A dated certificate in the maintenance file answers the question before it’s asked.
Around Highstreet, as anywhere, we clean the parts you cannot see as well as the canopy you can.
Highstreet is about 3 miles south-west of Whitstable, in Kent. Every kind of commercial site in Highstreet, extract fan cleaning is something we can help with. Visits can be booked for evenings, overnight or weekends so trading is not interrupted. We cover 922 places across Kent, large and small. We also work in Maidstone, around 20 miles away.
Here we cover the ME13 postcode area for extract fan cleaning. Extract fan cleaning is available to premises on Thanet Way and Highstreet Road and the roads around them. If your site is just outside Highstreet, we cover Waterham (1 mile west), Dargate (1 mile south-west), Seasalter (1 mile north), Hernhill (2 miles south-west) and Slutshole (2 miles south-west). Further out, we also cover Ashford (14 miles south), Canterbury (5 miles south-east), Sittingbourne (11 miles west), Whitstable (3 miles north-east), Faversham (4 miles west) and Herne Bay (7 miles north-east).
Around Highstreet
We work in commercial kitchens and buildings around Foxes Cross Bottom and the streets around them. The closest station to Highstreet is Whitstable station, about 3 miles north-east. Nearby you will also find Whitstable and Tankerton Hospital (3.6 miles north-east) and Tankerton Castle (3.3 miles north-east). Not far away are Blean Woods RSPB Reserve.
More services for Highstreet
How it works
Protection comes first: sheeting goes over floors and surfaces close to the work. After that, the system is made safe and the work begins. It takes a few hours where there are several fans or heavy deposits, and the area is cleaned down before we leave. A few photos of the system help us make the most of a visit to a place like Highstreet.
- We locate the fan and plan how to reach and isolate it.
- It’s isolated so it can’t run while we work.
- Grease is scraped off the impeller blades and casing.
- The fan is degreased, taking care around the motor.
- We reassemble, run and photograph the fan.
Getting ready for the visit
- Mention any sign-in, permit or induction we need
- Plan for cooking equipment or plant to be off before we arrive
- Clear loose items from the work area
Ask for a quote
Want a quote for extract fan cleaning? Please give us a ring on 0345 646 2711 or drop us a line with a few details about the site. We will explain what we’d do and send a fixed quote before you commit to anything.
Advice
Fixed quotes for extract fan cleaning in Highstreet
Before we fix a price, we need to know a few things. We check:
- One-off work versus a regular cycle
- The scale of the work
- Site rules, permits and inductions
- When the work can happen, such as evenings, overnight or weekends
Putting the work off seldom saves money. Build-up, wear and faults tend to get worse, not better, and a neglected system can mean more work. If you’re not sure what’s needed, phone us on 0345 646 2711 or use the quote form for straight advice and a fixed quote.
Helping us quote
A few details help us quote accurately. When you get in touch, it helps to send:
- Your opening hours and when the area is out of use
- Problems your staff have spotted
- The site address and the type of premises
- The paperwork from the last visit, if you have it
The quickest way to a quote is to send pictures: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and we can price many jobs without a visit.