Kent · Extract fan cleaning
Extract Fan Cleaning in Donkey Street
Professional extract fan cleaning in and around Donkey Street, timed so the site keeps working and signed off in writing with pictures.
- A motor area thick with grease
- Weak extraction at the canopy
- Hot, greasy smells near the fan
How we handle extract fan cleaning in Donkey Street
A clean fan isn’t a repaired fan. If we find worn bearings, a struggling motor or damage to the impeller, we will tell you and fan repair or replacement is something we also do. You will know whether the fan just needed cleaning or something more. We are often asked to deal with hot, greasy smells near the fan and an extract fan that vibrates or rattles, across roof-mounted fans, axial fans and centrifugal fans.
Work in a small place like Donkey Street starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy to discharge, then a TR19® certificate and a photo report.
Nothing is signed off by word of mouth: a dated report with photos of the work, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. Any parts we couldn’t reach are recorded on it too.
- Location
- Donkey Street (TN29)
- Region
- Kent
- Records
- TR19® certificate and photo report
- Quotes
- A fixed quote up front
- Working hours
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Last updated
- 30 October 2026
Common questions in Donkey Street
Which fire service covers Donkey Street?
It’s Kent Fire and Rescue Service, which covers Donkey Street. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
Do you work in villages like Donkey Street?
Yes. Donkey Street is within the area we cover across London and the South East. A survey first, from pictures or a visit, means we arrive with the right kit.
Who is responsible for fire safety on the premises?
In the words of the Fire Safety Order 2005, it’s the responsible person. That is generally the employer or the person in control of the premises, and in shared buildings more than one person can have duties. If you are not sure, check your lease and fire risk assessment.
Are you insured?
Yes. We carry full insurance and have been trading since 2009.
Can the fan be cleaned between full cleans?
Yes, we can clean just the fan. That helps when the fan needs attention before the next full clean, but it doesn’t replace a full TR19 clean.
Will I get pictures of the cleaned fan?
A photo report, including the fan’s condition and the next clean date. File it with your other extract records.
Do you offer emergency callouts?
Yes. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line, and we’ll advise on what to do next.
How do you protect the area?
We cover floors and nearby surfaces with sheeting before any work starts, and waste is contained as we go. Before we leave, we tidy up and clean down.
Grease, kitchens and Donkey Street
At about 2 miles from the coast, Donkey Street is close enough for sea air to matter. Salt in the air is hard on rooftop fans, discharge cowls and fixings, so we check them for corrosion as well as grease. Food Standards Agency data counts about 8 cafés, restaurants and staff canteens within roughly a mile and a half of the centre of Donkey Street. The fan at the end of each of those extracts collects grease that slows it and wears the motor. Donkey Street is covered by Kent Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order.
If you run catering at a historic house or estate in the area (Westenhanger Castle is about 3.2 miles north), event kitchens in older buildings often have awkward duct runs that need planning.
Donkey Street is about 4 miles south-west of Hythe, in Kent. We provide extract fan cleaning for businesses, landlords and public buildings in Donkey Street and the rest of Kent. Across Kent, we cover 922 places, and Donkey Street is one of them. You can also see our page for Maidstone, roughly 26 miles from Donkey Street.
Here we cover the TN29 postcode area for extract fan cleaning. We also cover the places around Donkey Street: Dymchurch (1 mile south), West Hythe (2 miles north-east), Lympne (2 miles north-east), Palmarsh (2 miles north-east) and Berwick (2 miles north-east). Larger places within reach include Ashford (9 miles north-west), Dover (14 miles north-east), Folkestone (7 miles east), Hythe (4 miles north-east), Tower Hamlets (14 miles north-east) and Hawkinge (8 miles north-east).
What’s near Donkey Street
Around Donkey Street, our work takes us to kitchens and buildings near The Shepherd And Crook Public House and the streets around them. For rail, the closest station is Westenhanger station, about 3.4 miles north-east. Nearby you will also find Lympne Castle (1.7 miles north-east) and Hythe Museum (3.6 miles east). Green spaces nearby include Tolsford Hill.
Staff cleaning versus specialist work
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, they should report it rather than try to fix it. We can diagnose it and quote.
Staff cleaning and specialist work aren’t the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.
Leave it or put it right?
Vibration from an unbalanced impeller doesn’t stay small. It wears bearings and mounts and can lead to a breakdown, which may leave the kitchen without extraction. A planned clean beats an emergency. A planned visit to Donkey Street is easier to arrange than an emergency callout.
Combining work into one visit or one programme often makes better use of the time. Mention every system or site you need covered, and you will get one fixed quote.
What you get with us
- One number for every site across the South East and London
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- A written report with pictures after every visit
- Accredited under CHAS and SafeContractor, with ISO 9001
Read our cost guide and our accreditations and certificates.
Looking after it afterwards
Once we’ve finished, these simple steps help:
- Check the report shows the fan was cleaned
- Flag smoke lingering at the canopy
- Check filters are seated before cooking
- Keep access to the fan clear
Keep the report with the maintenance log and fire risk assessment. It gives a dated record of the fan’s condition, which helps if anything changes later.
Don’t run the kitchen with the extract off. Grease settles faster when the air stops moving, so keeping it running helps keep it clean.
How we price extract fan cleaning
A fixed price needs a few facts first. We look at:
- The number of sites or systems
- What state the system is in
- How easy every part is to reach
- A single visit or a regular plan
Leaving it longer rarely makes the work cheaper. Problems in a system tend to grow, and a neglected system can mean more work. If you’re not sure what’s needed, phone us on 0345 646 2711 or drop us a line and we’ll give you an honest view and a fixed quote.
Helping us quote
When you call or email, these details help:
- Your opening hours and when the area is out of use
- Problems your staff have spotted
- Any access panels or hatches you can see
- The postcode and the type of business
There’s no standard price list, because every site is different. Instead, we look at your site first, from photos or a survey, and then send you a fixed quote. To start, give us a ring on 0345 646 2711 or send us an email.
Different parts, different methods
Fan housings and motors
We clean around the motor without soaking its electrics, and the fan is isolated throughout. Grease on and around the motor can trap heat, so we clean what we safely can.
Inline duct fans
Hidden in a ceiling void, an inline fan is easily missed. The survey makes sure it’s part of the clean.
What we do, step by step
Night work is normal for us. Evenings, nights and weekends are when much of our work happens, so the site can open as normal afterwards. The visit itself takes a few hours where there are several fans or heavy deposits. Seeing the system in photos first means the trip to Donkey Street can be planned properly.
- The fan is found and its type, access and isolation checked.
- It’s isolated so it can’t run while we work.
- Grease is scraped off the impeller blades and casing.
- The fan is degreased, taking care around the motor.
- We reassemble, run and photograph the fan.
Before we arrive
- Let us know how we reach the system, including roofs, risers and plant rooms
- Let us know about parking and loading
- Move anything stored near the system
Ask for a quote
To get a fixed quote, phone us on 0345 646 2711 or drop us a line with the site type, your trading hours and a short description of the system. A few photos and your last certificate or report help a lot. You will normally have a quote within one working day.
Related advice
Signs you need extract fan cleaning in Donkey Street
The cooler the air, the more grease drops out, and on a roof or outside wall the fan can be in some of the coolest air in the system. So grease often settles heavily there.
If you notice any of these, it’s worth a diagnosis:
- Grease around the motor and its mounts
- A fan that hums, whines or rumbles
- A fan left out of previous cleans
- Vibration from an unbalanced impeller
If you run a church or community hall kitchen, near Church of All Saints or elsewhere in Donkey Street, its extract still collects grease from every lunch and event.
Before booking anyone
- What insurance they carry
- Exactly which parts of the system are covered
- How areas they cannot reach will be recorded
- Which accreditations they hold, and whether you can check them