Kent · Extract fan cleaning
Extract Fan Cleaning in Charing
Specialist extract fan cleaning for Charing: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- A fan that no longer moves enough air
- A smell of hot grease from the extract
- Grease escaping from the fan outlet
Extract fan cleaning in Charing
A clean fan is not a repaired fan. If we find worn bearings, a struggling motor or damage to the impeller, we’ll tell you and fan repair or replacement is something we also do. You will know whether the fan just needed cleaning or something more. The work covers axial fans, fan housings and centrifugal fans, and common reasons people get in touch are a motor area thick with grease and rough running from the extract fan.
In a smaller place like Charing, the kitchens with extract systems are more likely to be a pub, a café, a takeaway or a school or care home kitchen than a big restaurant. A kitchen that cooks fewer hours still builds up grease, so the interval is set by hours of use and grease readings.
Think of the report as the system’s health record: dated, with pictures, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal and sits alongside the report.
- Location
- Charing (TN27)
- Region
- Kent
- Reporting
- Certificate plus before-and-after photos
- Quote
- Fixed quote, normally within a working day
- When we work
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
When to call us in Charing
Fans that are hard to reach are often the ones that get missed. If it wasn’t included in past cleans, it may hold years of grease, and the report will show it.
Look out for any of the following:
- A fan that no longer moves enough air
- Vibration from an unbalanced impeller
- A motor area thick with grease
- An extract fan with no cleaning record
If you run a church or community hall kitchen, near Church of St Peter and St Paul or elsewhere in Charing, its extract still collects grease from every lunch and event.
Comparing quotes
- If the quote is a fixed price or an estimate
- Exactly which parts of the system are covered
- What paperwork you get at the end
- Proof of insurance
Towns and villages near Charing
Other services in Charing
Why act early in Charing
A fan that sounds rough in Charing is often telling you the extract needs a clean. Grease on the fan means grease in the duct before it, so it’s worth checking the whole system. A quieter site near Charing still needs its system looked after.
The cost depends on the size of the system, what state it’s in and how easy it is to reach. We give you a fixed price before work begins, so there are no surprises.
Why choose Duct Doctor in Charing
- Every visit written up, with pictures
- One contact for all your sites in London and the South East
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- Ventilation hygiene specialists since 2009
Read what affects the cost and our accreditations.
Extract fan cleaning in Charing: the local picture
Food Standards Agency data counts about 6 restaurants, cafés and works canteens within about 1.5 miles of central Charing. Where they cook under a canopy, an extract fan is pulling grease-laden air through its blades every service. In Charing, food businesses are inspected by environmental health officers from Ashford council. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Keeping each certificate and photo report on file helps show the extract is looked after. Charing is covered by Kent Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract.
Term dates shape school work: for a school like Charing Church of England Primary School, an extract clean fits neatly into a half-term or summer break. Commuter trade near Charing station can mean long cooking hours, and long hours put a kitchen into BESA’s more frequent cleaning bands.
Charing is about 6 miles north-west of Ashford, in Kent. Sites in Charing get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with photos. Across Kent, we cover 922 places, Charing among them. Our Maidstone page covers sites nearby, about 12 miles away.
Work in TN27 is surveyed, quoted and booked the same way as anywhere else. If you need extract fan cleaning at premises on The High Street, Market Place and Station Road or anywhere close by, we can help. Neighbouring places we cover for extract fan cleaning include Charing Heath (1 mile west), Cold Harbour (2 miles north-west), Lenham Heath (2 miles west), Stonebridge Green (2 miles west) and Lenham Forstal (3 miles west). Further out, we also cover Maidstone (12 miles west), Ashford (6 miles south-east), Canterbury (13 miles east), Sittingbourne (9 miles north), Whitstable (14 miles north-east) and Faversham (8 miles north-east).
What’s near Charing
In Charing, that means kitchens and buildings near Spuckles and Kennelling Woods and King's Head Public House, among other places. There’s a railway station in Charing itself: Charing station. Other landmarks nearby include Coldbridge Castle (4.3 miles west).
Fixed quotes for extract fan cleaning in Charing
The survey tells us what the work involves. We look at:
- Site rules, permits and inductions
- Access, including roofs, risers and ceiling voids
- The scale of the work
- The times the site is available
A single site or a whole portfolio, we price it on the same basis: the work involved, the access and the timing. You will have a fixed price before any work starts.
Asking for a quote
We can often survey from photos. Try to include:
- A few general shots of the system
- Any previous report or certificate
- Detail shots of panels, filters and grilles
- The postcode and the type of business
Quotes are quick. Call or email with a few details and you will normally have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
In-house cleaning or a specialist?
Logging matters as much as cleaning. A dated log of in-house cleaning and checks shows an inspector that the system is looked after between visits, alongside our reports.
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. Leave those to us.
Your questions about extract fan cleaning in Charing
Who inspects food businesses in Charing?
The local authority for Charing is Ashford council, and its environmental health team does the inspecting. An officer may look up into the canopy, so clean filters on the day and a recent certificate on file both help.
Can you work in Charing outside opening hours?
Yes, nights and weekends are routine for us. Your customers, staff or residents in Charing needn’t be disturbed. Just ring 0345 646 2711 or use the quote form with your opening times and we’ll plan around them.
How often should the extract fan be cleaned?
It’s cleaned with the whole extract at BESA’s minimum intervals for your cooking hours. Readings may show it needs cleaning more often.
Do we lose a day’s trading?
Not typically. The area we’re working in has to be out of use while we are there, so we book a time when it would be closed anyway.
How much notice should we give?
The more notice, the better, particularly for night and weekend visits. We usually quote within one working day, and emergencies are covered by our 24/7 line.
Is TR19 a legal requirement?
No. The law sets the duty; TR19® is the benchmark used to show it’s met. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person has to manage fire risk, and without records, many insurers may refuse or reduce a claim.
Can you fix a fan that is worn out?
We also repair and replace extract fans. If cleaning shows a worn motor, bearings or impeller, we’ll tell you and quote for the repair.
Are you accredited?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We’re fully insured and have been trading since 2009.
What happens on the day
The first job on site is protection: sheeting goes over floors and surfaces close to the work. After that, the system is made safe and the work begins. It takes an hour or two for most single fans, and we clear up before we go. We plan the journey to Charing and bring what the job is likely to need.
- We find the fan and check how it’s reached and how it’s isolated.
- With the fan isolated, the housing is opened.
- We remove the grease from the blades, impeller and casing.
- Blades, housing and the area around the motor are degreased with care.
- The fan is put back into service, checked and photographed.
Preparing for the visit
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Mention any sign-in, permit or induction we need
- Have your last certificate or report to hand
Ask for a quote
Photos are enough for some jobs, while others need a look on site. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, the quote is fixed before any work is booked.
Advice
Between visits
Here’s the after-treatment advice, short and simple:
- Notice when the fan starts to sound different
- Keep the fan on whenever the range is lit
- Make sure the fan is included each time
- Flag smoke lingering at the canopy
File the photo report with your other extract records. It shows the fan’s condition at the time of the clean, which helps if anything changes later.
Listen to the fan. Rattles, hums or shaking can be early signs of build-up or wear, and catching it early keeps it a cleaning job.
When something else is needed
We’ll always give you a straight diagnosis, so here’s what this work cannot put right:
- A faulty speed controller or isolator
- An impeller that is bent or split
- Grease in the canopy and ductwork
If in doubt, give us a ring on 0345 646 2711, or send details by email and we will say what we think before booking.
What we work on in Charing
- Centrifugal fans
- In-line fans
- Fan housings
- Axial fans
- Discharge points
- Roof-mounted fans