Kent · Extract fan cleaning
Extract fan cleaning in Bishopstone, Kent
Extract fan cleaning across Bishopstone and nearby, timed so the site keeps working and finished with a written report and photos.
- An extract fan that vibrates or rattles
- Less air being pulled from the kitchen
- Hot, greasy smells near the fan
Extract fan cleaning for kitchens and businesses in Bishopstone
Every TR19® Grease clean includes the extract fan, but some fans need cleaning between full cleans, for example when it’s noisy or vibrating. Where only the fan is cleaned, the report says so. Typical jobs include a fan that has never been cleaned and an extract fan that vibrates or rattles, on roof-mounted fans, axial fans and discharge points.
Around a smaller place like Bishopstone, kitchen extracts tend to belong to pubs, cafés, takeaways and school or care home kitchens. A kitchen that cooks fewer hours still builds up grease, so the interval is set by hours of use and grease readings.
The paperwork matters as much as the work. Each visit is written up with photos, covering the work done, any areas we couldn’t access and a recommended next date. File it in your maintenance log so it’s ready for an insurer, fire officer or EHO.
- Where
- Bishopstone (CT6)
- Region
- Kent
- Paperwork
- Certificate and photo report
- Quotes
- Fixed quote, normally within a working day
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
Keeping the system healthy
Simple habits between visits make a real difference. Our advice:
- Run the extract throughout cooking
- Do not store items in front of the fan’s access point
- Keep the grease filters clean and in place
- Tell us if the extract feels weaker
Keep the report with the maintenance log and fire risk assessment. It gives a dated record of the fan’s condition, which helps if anything changes later.
Keep the whole system on its cleaning cycle. A fan cleaned with the rest of the system on time rarely gets badly coated, in line with BESA guidance.
What the work involves, part by part
Fan housings and motors
The housing around the impeller catches grease flung off the blades. It’s scraped and degreased with the impeller.
Inline duct fans
An inline fan can be easy to forget because it’s out of sight. We find it during the survey and include it in the clean.
What happens on the day
There are three stages on the day: getting the area ready, doing the work and signing it off. Set-up means sheeting and making equipment safe, while signing off means the written report and photos. The middle part takes longest, and that takes an hour or two for one fan, longer when it’s hard to reach. We plan the journey to Bishopstone and bring what the job is likely to need.
- First we locate the fan and agree how it’s safely isolated.
- The fan is isolated so it cannot start while we work.
- Grease is scraped from the impeller blades and the inside of the housing.
- The fan and its surrounds are degreased, keeping clear of the motor’s electrics.
- The fan is put back into service, checked and photographed.
Preparing for the visit
- Allow time for equipment near the work to be turned off and cool down
- Agree a time when the area can be out of use
- Arrange a key holder or contact on site
Getting a quote
To get a fixed quote, call 0345 646 2711 or email us with the site type, your trading hours and a short description of the system. A few photos and your last certificate or report help a lot. We usually come back within one working day.
Related advice
What extract fan cleaning looks like in Bishopstone
The coast is only about 1 mile from Bishopstone. Salt air speeds up corrosion of roof-level fans, discharge cowls and their fixings. Food Standards Agency data counts about 6 cafés, restaurants and staff canteens and about 10 takeaways and sandwich shops within about 1.5 miles of central Bishopstone. Each kitchen extract among them ends at a fan, and grease on the impeller strains the motor. Bishopstone sits within the area of Kent Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
A hall kitchen that only cooks for events, whether near Church of St Mary the Virgin or elsewhere in Bishopstone, still needs its extract cleaned, just less often. Term dates shape school work: for a school like Reculver Church of England Primary School, an extract clean fits neatly into a half-term or summer break.
Bishopstone is about 2 miles east of Herne Bay, in Kent. Whatever kind of site you run in Bishopstone, we can take on extract fan cleaning. Visits can be booked for evenings, overnight or weekends so the site keeps running. 922 places in Kent are on our list, from busy centres to quieter spots. Maidstone is in our area too, around 29 miles away.
Every address in CT6 is covered for extract fan cleaning, from the main roads to the quietest streets. Whether your site is on Manor Road, Puffin Road and Neville Road or a nearby road, our technicians can take on the work. Neighbouring places we cover for extract fan cleaning include Hillborough (1 mile south), Beltinge (1 mile west), Hawthorn (1 mile south), Reculver (1 mile east) and Broomfield (1 mile south-west). Larger places within reach include Canterbury (8 miles south-west), Margate (9 miles east), Ramsgate (11 miles east), Broadstairs (11 miles east), Whitstable (6 miles west) and Deal (14 miles south-east).
Local landmarks in Bishopstone
In Bishopstone, that means kitchens and buildings near Bishopstone Cliffs. The nearest railway station is Herne Bay station, about 2.4 miles west. Well-known places in the area include Whitstable and Tankerton Hospital (5.3 miles west). Not far away are West Blean and Thornden Woods.
In-house cleaning or a specialist?
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but the parts you can’t see still need a specialist at the right interval.
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
What extract fan cleaning can’t fix
We’ll always give you a straight diagnosis, so here’s what this work cannot put right:
- A failed motor or worn bearings (that needs a fan repair or replacement)
- A dirty duct upstream of the fan
- Damaged fan blades
If you’re not sure, just phone us on 0345 646 2711 or send us an email and we will give you a straight answer before booking.
What the work covers
- Discharge points
- Axial fans
- Roof-mounted fans
- In-line fans
- Fan housings
- Centrifugal fans
Leave it or put it right?
A fan clean in Bishopstone doesn’t take long: the work takes a few hours where there are several fans or heavy deposits. Leaving it means more wear, more noise and a bigger clean later. A site near Bishopstone that has to close at short notice is hard to cover for.
The cost depends on how big the system is, what state it’s in and how easy it is to reach. We give you a fixed price before any work starts, so there are no surprises.
Why choose Duct Doctor in Bishopstone
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- Survey first, then a fixed quote
- Fixed quotes from a survey or photos
- One number for every site across the South East and London
Take a look at what affects the cost and how to check a contractor.
Places near Bishopstone
More services for Bishopstone
Common problems we fix in Bishopstone
Grease condenses as the air cools, and on a roof or outside wall the fan can be in some of the coolest air in the system. That makes it a natural place for grease to settle.
Most sites get in touch when they notice one of these:
- An extract fan that vibrates or rattles
- Burning smells from the fan area
- A fan that hums, whines or rumbles
- A fan left out of previous cleans
Healthcare kitchens, like those at hospitals such as Whitstable and Tankerton Hospital (about 5.3 miles west), often cook for long hours, which puts them in BESA’s heavier-use bands.
What to look for in a quote
- How they set the interval to the next visit
- How areas they cannot reach will be recorded
- If they look at the system before pricing
- What paperwork you get at the end
FAQs for Bishopstone
Do you work at weekends in Bishopstone?
Yes. We work evenings, overnight and at weekends. The site is handed back ready to open. Your opening times are the first thing we ask for.
Can you get to a site in Bishopstone?
Yes, we work in villages as well as towns, and Bishopstone is covered. Photos of the system and directions to the site help us plan the visit.
Who is the responsible person?
It depends on the building. Under the Fire Safety Order 2005, it’s the responsible person, which may be the employer, owner, landlord, facilities manager or managing agent.
Do you look at the system first?
Yes, every time. We diagnose before we treat: the survey shows what needs doing and what access we need and the fixed quote is built on it.
Does the law say we must follow TR19?
No. The law sets the duty; TR19® is the benchmark used to show it’s met. Under the Fire Safety Order 2005, the responsible person must reduce fire risk, and without records, many insurers may refuse or reduce a claim.
Do you have insurance?
Yes, fully. CHAS and SafeContractor accreditation sit alongside it, for sites that check contractor safety.
How far ahead should we book?
Earlier is better, especially for out-of-hours work. Quotes typically come back within one working day, and there’s a 24/7 line for emergencies.
What information do you need?
Just the basics: the address, the site type, your opening hours and how we reach the system. Photos and the last report help too. Then ring 0345 646 2711 or send us an email.