Kent · Ductwork cleaning

Willesborough ductwork cleaning

Ductwork cleaning across Willesborough and nearby, timed so the site keeps working and finished with a written report and photos.

  • Heavy grease at the base of a riser
  • Fat dripping from the ductwork
  • Ductwork that has never been cleaned

Ductwork cleaning near Willesborough

About our ductwork cleaning in Willesborough

The ductwork is where an extract clean is won or lost. Without enough access panels, long stretches can go years without being touched. We open up every reachable section and record any we cannot reach, so you know exactly where you stand. The work covers multi-storey ducts, bends and junctions and attenuators, and the jobs we see most are grease leaking from duct joints and smells of old cooking grease from the ductwork.

Size doesn’t change the work: a kitchen in a place like Willesborough gets the whole system cleaned, canopy to discharge. The visit is booked around your opening hours, and the journey is planned ahead.

We’ve been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we carry full insurance.

Place
Willesborough (TN24)
Wider area
Kent
Records
Certificate and photo report
Quotes
A fixed price before any work starts
When we work
Out of hours as standard, 24/7 emergency line
Telephone
0345 646 2711
Last updated
30 October 2026
Before and after view down the inside of a rectangular extract duct

Kitchen extracts in Willesborough

The FSA’s food hygiene register shows about 87 restaurants, cafés and canteens and about 29 sandwich bars and takeaways in and around Willesborough, up to about a mile and a half out. Behind every canopy among them is a run of ductwork that collects grease out of sight. The fire and rescue service for Willesborough is Kent Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises. Kitchens in Willesborough get their food hygiene inspections from Ashford council. Extraction counts as kitchen equipment, so its condition can come up on the day. A TR19® certificate and photo report after each clean gives you a record to show an inspector.

If you cook for passing trade around Ashford International station, the extract can be cleaned between your last and first customer. School kitchens, at schools like Willesborough Junior School for example, are typically cleaned in the holidays so no lunches are lost.

Willesborough is about 1 mile east of Ashford, in Kent. Every kind of commercial site in Willesborough, we can take on ductwork cleaning. Visits can be booked for evenings, overnight or weekends so trading isn’t interrupted. Our Kent coverage runs to 922 places, Willesborough among them. Our Maidstone page covers sites nearby (18 miles or so).

Ductwork cleaning in TN24 is surveyed, quoted and booked the same way as anywhere else. Streets in the area include Mead Road, Mill Lane and Milne Road, and we cover them all for ductwork cleaning. You’ll find Willesborough on the A2070, so it’s easy for us to get to for out-of-hours visits. Other places close to Willesborough include South Willesborough (1 mile south-west), Newtown (1 mile south-west), Ashford (1 mile west), Finberry (1 mile south) and Park Farm (2 miles south-west). Within a short drive, we also cover Canterbury (13 miles north-east), Folkestone (12 miles east), Faversham (12 miles north), Hythe (9 miles south-east), Davington (12 miles north) and Preston (12 miles north).

Local landmarks in Willesborough

In Willesborough, that means kitchens and buildings near The William Harvey Public House, Ashford Green Corridors and The North School and the streets around them. For rail, the closest station is Ashford International station, about 0.9 miles west. A little further out are William Harvey Hospital (0.8 miles east) and Ashford Designer Outlet (0.8 miles west). For a walk, there’s Hatch Park.

Map of Willesborough © OpenStreetMap contributors

What the work involves, part by part

Access panels

After cleaning, every panel is closed and sealed, so grease and air stay inside the duct. We will tell you if any panel needs replacing.

Horizontal duct runs

Long horizontal runs need access panels at regular intervals. Where the gaps between panels are too long, we record what couldn’t be reached and can fit extra panels.

How the visit works

Protection comes first: floors, worktops and anything near the work are covered. After that, the system is made safe and the work begins. The work on site takes a shift or more, depending on the length of the runs and the number of access points, and we clear up before we go. For a site near Willesborough, the work is booked around your opening hours, evenings and weekends included.

  1. We start by working out how the duct runs and where it can be opened.
  2. Grease readings are taken at set points along the duct.
  3. We open the panels and scrape out the heaviest grease.
  4. Next the ducts and risers are degreased, using whatever suits the deposit.
  5. Readings and pictures are repeated and any section we couldn’t reach is recorded.

Getting ready for the visit

  • Tell us the best time to work, such as after service or at a weekend
  • Let us know about parking and loading
  • Let us know how we reach the system, including roofs, risers and plant rooms

Get a fixed quote

We don’t publish a price list, because every site is different. Instead, we look at your site first, from photos or a survey, and then send you a fixed quote. To get going, call us on 0345 646 2711 or drop us a line.

Get a price

Related advice

What staff can safely do

Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.

Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, alongside our reports.

Why deal with it now?

There’s no law that names TR19. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, including the grease inside the extract ductwork. A visit arranged in advance is far less disruptive than a callout on a busy day.

Every site is different, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all make a difference.

Why choose Duct Doctor in Willesborough

  • Trading since 2009
  • A single point of contact for sites across the South East and London
  • Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
  • We diagnose before we treat

See what affects the cost or our accreditations and certificates.

When to call us in Willesborough

Ducts in Willesborough gather grease for the same reasons as ducts anywhere: daily cooking hours, the menu and the state of the filters. BESA guidance sets minimum intervals of 3, 6 or 12 months depending on daily use.

Keep an eye out for these warning signs:

  • Duct runs with no cleaning record
  • Gaps where access panels were never fitted
  • A duct clean needed for an insurer
  • High readings at a recent grease test

If you run catering at a healthcare site, such as a hospital like William Harvey Hospital about 0.8 miles east, the extract may need cleaning more often than a part-time kitchen.

What your quote should include

  • Whether the work can be done while the site is closed
  • Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
  • When the next visit should be, and why
  • Whether the figure could change on the day

Questions to ask before booking

Fixed quotes for ductwork cleaning in Willesborough

You’ll get a fixed price before we start. It’s based on:

  • The times the site is available
  • Site rules, permits and inductions
  • The scale of the work
  • Whether we need access equipment or extra panels

What you pay reflects the actual work. That is why we survey first, from pictures or on site, and the price is agreed before work begins.

What to send for a quote

The more you tell us, the more accurate the quote. When you get in touch, it helps to send:

  • Anything you’ve noticed, such as smells, noise, drips or poor airflow
  • Close-ups of filters, grilles, hatches or access panels
  • Photos showing the whole system and its surroundings
  • Your last certificate, test record or report

Getting a quote does not take long. Send a few details and pictures, and we normally reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.

Multi-site and managed buildings

When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We are happy to deal with either side and send the paperwork to whoever needs it.

Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.

Willesborough: your questions answered

Do you work in villages like Willesborough?

Yes. Villages and rural sites across the South East are part of our work, Willesborough included. Just mention lanes, gates or anything else about the site when you book.

Which council inspects kitchens in Willesborough?

Food hygiene inspections in Willesborough are carried out by Ashford council. An officer may look up into the canopy, so clean filters on the day and a recent certificate on file both help.

Is there a survey before the work?

Yes. For many sites, pictures and a few details are enough, while bigger or harder-to-see systems are surveyed on site.

Which sectors do you work in?

Any site with a kitchen or a ventilation system to look after, from a small pub to a hospital. We work with hotels, schools, care homes, offices, retail and leisure sites.

Can you clean ductwork with no access panels?

Every reachable section is cleaned and the rest recorded. Fitting extra access panels is the usual answer, and we can do that for you.

How often does extract ductwork need cleaning?

The duct is cleaned as part of the whole system, at intervals set by BESA guidance, from every 3 months for heavy use to every 12 months for light use. Readings tell you if it needs to be more often.

How much notice do you need?

Book as early as you can for planned work, particularly if your next visit is nearly due. For emergencies, we take calls 24/7.

How long does it take to clean extract ducts?

Short runs are quick, but long or complex ducts may take several visits. We plan the work around your kitchen.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London