Surrey · Ductwork cleaning
Ductwork Cleaning in Thames Ditton
Ductwork cleaning in Thames Ditton, surveyed first and signed off with a written report and photos. Call for a fixed quote.
- Gaps where access panels were never fitted
- A grease test showing the duct is overdue
- Grease pooling at the foot of the riser
Ductwork cleaning around Thames Ditton
Look up Thames Ditton on the FSA’s food hygiene register and you’ll find about 103 cafés, restaurants and staff canteens and about 30 takeaways and sandwich shops within 1.5 miles or so of the middle of Thames Ditton. Each kitchen that cooks under a canopy sends grease-laden air into a duct, where it cools and settles. It’s Elmbridge council that sends environmental health officers to food businesses in Thames Ditton. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. A TR19® certificate and photo report after each clean gives you a record to show an inspector. Thames Ditton sits within the area of Surrey Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; Tolworth Hospital is the nearest hospital to Thames Ditton, about 2 miles east. Volunteers running a hall kitchen near Church of St. Nicholas, or anywhere in Thames Ditton, may not know when the extract was last cleaned, and a grease test settles it. If you cook for passing trade around Thames Ditton station, the extract can be cleaned between your last and first customer.
Thames Ditton is about 1 mile west of Surbiton, in Surrey. We carry out ductwork cleaning for commercial premises of every kind in Thames Ditton and the rest of Surrey. Thames Ditton is one of 395 towns, villages and districts in Surrey we cover for ductwork cleaning. Our London page covers sites nearby (13 miles or so).
We cover every part of the KT7 postcode area for ductwork cleaning and the streets around it. Streets in the area include High Street, Watts Road and Ditton Close, all of which we cover for ductwork cleaning. You’ll find Thames Ditton on the A307, which makes it straightforward for our technicians to reach for ductwork cleaning. Nearby, we also carry out ductwork cleaning in Weston Green (1 mile south-west), Long Ditton (1 mile east), Hinchley Wood (1 mile south), Seething Wells (1 mile east) and Molesey (1 mile north-west). Within a short drive, we also cover Guildford (14 miles south-west), Woking (12 miles south-west), Epsom (5 miles south-east), Redhill (13 miles south-east), Ewell (4 miles south-east) and Egham (10 miles west).
What’s near Thames Ditton
In Thames Ditton, that means kitchens and buildings near Esher College, George and Dragon pub and Shrewsbury House School, among other places. Thames Ditton has its own railway station: Thames Ditton station. Well-known places in the area include Metropolitan Police Mounted Branch Museum (0.8 miles west) and Tolworth Hospital (2 miles east). The countryside around Thames Ditton includes The Wood and The Lake.
Ductwork cleaning in Thames Ditton, done properly
In doctor’s terms, the ductwork is the system’s arteries: find the blockages, clear them, then check the flow is right. Readings taken before and after show the difference, alongside before and after pictures. If you have heavy grease at the base of a riser and a grease test showing the duct is overdue, we can help.
For a smaller kitchen near Thames Ditton, a TR19® clean is the same job as anywhere: canopy, filters, plenum, duct, fan and discharge. The visit is booked around your opening hours, and the journey is planned ahead.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we are fully insured. We are also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we have been trading since 2009.
- Place
- Thames Ditton (KT7)
- Region
- Surrey
- Paperwork
- TR19® certificate and photo report
- Price
- A fixed quote up front
- When we work
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
Multi-site and managed buildings
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We’re happy to deal with either side and send the paperwork to whoever needs it.
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. Where responsibility is shared, records matter even more.
Different parts, different methods
Attenuators and discharge
Some systems have attenuators to reduce noise, but they can hold grease in their linings. They’re cleaned where possible and recorded if not.
Access panels
Access panels are the doors that let us into the duct. Where there are none, those sections cannot be cleaned, and TR19 expects them to be recorded.
Why deal with it now?
A partly blocked duct slows the airflow. The fan works harder, the kitchen gets hotter and smoke lingers at the canopy, and grease may start to leak from joints. Booking ahead lets us plan the trip to Thames Ditton at a time that suits you.
One small site or a whole estate, the quote is built the same way: what needs doing, how we get to it and when. You’ll have a fixed price before work begins.
What you get with us
- One contact for all your sites in London and the South East
- Out-of-hours work and a 24/7 emergency line
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Full insurance on every job
Take a look at how cleaning jobs are priced or our accreditations and certificates.
Staff cleaning versus specialist work
Keep a record of what your team does. A dated log of in-house cleaning and checks shows an inspector that the system is looked after between visits, alongside our reports.
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
Places near Thames Ditton
Also in Thames Ditton
What ductwork cleaning cannot fix
A few issues sit outside what this work can do:
- Faulty fire dampers
- A duct that is too small or badly routed for the kitchen (a design issue)
- Duct sealed behind fixed ceilings or walls
Not sure which it is? You can call us on 0345 646 2711 or send us an email and we’ll tell you honestly before booking.
Where we work
- Access panels
- Vertical risers
- Bends and junctions
- Attenuators
- Multi-storey ducts
- Horizontal duct runs
Common questions in Thames Ditton
Which fire service covers Thames Ditton?
It’s Surrey Fire and Rescue Service, which covers Thames Ditton. A recent cleaning certificate and a note of the next clean date show that grease in the extract is being managed.
Can school kitchens in Thames Ditton be cleaned in the holidays?
Yes. Half-terms and the summer break are the natural time for school work. There are about 13 schools, colleges and universities on the FSA’s food hygiene register within about 1.5 miles of Thames Ditton. Just call 0345 646 2711, or email photos with your term dates and we’ll plan around them.
How do you keep the site clean during the work?
Protection goes down first: sheeting over floors, worktops and anything close to the work. The area is left tidy, with our waste taken away.
Are you fully insured?
Yes. Duct Doctor is fully insured, and the details are available on request.
How much does ductwork cleaning cost?
Size, condition, access and working hours all affect the cost. Ask us for a fixed quote and we’ll normally reply within one working day.
Can we book visits on a schedule?
Yes. Plans on a 3, 6 or 12-monthly cycle are available, depending on what the system needs.
What types of premises do you cover?
Restaurants and pubs, hotels, schools and colleges, hospitals and care homes, offices and retail, plus food production and leisure sites.
How long does ductwork cleaning take?
It takes from a few hours to more than one visit, depending on duct length and access. The survey tells us how long your duct needs.
How the visit works
We start by comparing what we find with the survey or your photos. If anything is different, we talk it through with the person on site before carrying on. From there, it takes a few hours for a short run, longer for long runs and tall risers. Evenings, weekends or a closed day all work for a site in a place like Thames Ditton.
- First the duct route is traced and every access point noted.
- Grease readings are taken at set points along the duct.
- Access panels are opened and heavy deposits scraped out by hand.
- Next the ducts and risers are degreased, using whatever suits the deposit.
- We test again, take photos and note any part that couldn’t be reached.
How to prepare
- Let us know how we reach the system, including roofs, risers and plant rooms
- Mention any sign-in, permit or induction we need
- Make sure someone can let us in and lock up afterwards
Ask for a quote
Quoting starts with a diagnosis, from your photos and details or, where that is not enough, a survey on site. After that, you get a fixed price for the work so you know the cost before work begins.
Advice
Between visits
Looking after the system between visits is straightforward, and it makes the next visit easier:
- Make sure filters are seated properly
- Store the certificate with the fire risk assessment
- Do not block access panels with shelving or stock
- Get panels fitted where the duct couldn’t be cleaned
A full system clean includes a TR19 certificate from the BESCA Vent Hygiene Elite portal. It shows when and where the clean was done and by whom.
Extra access panels mean more of the duct gets cleaned each time. It doesn’t stop grease forming, but it stops it building unseen.