Kent · Ductwork cleaning
Ductwork Cleaning in Shalmsford Street
One call covers cleaning of kitchen extract ductwork, horizontal runs and vertical risers through access panels in Shalmsford Street: survey, fixed quote, work and sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Ductwork that has never been cleaned
- Smells of old cooking grease from the ductwork
- Grease seeping out of the duct seams
Landlords, agents and facilities managers
Multi-site operators often want one contractor and one number. We work across London and the South East, so a run of sites can go into one programme and kept on a regular cycle.
Managing agents often deal with us directly. Send the address, what’s needed and how access works, and we’ll send a fixed quote.
Ductwork cleaning for kitchens and businesses in Shalmsford Street
Nobody sees duct grease building, so nobody notices it until something goes wrong. Flames pulled in from the cooking line can ignite it, and fire can then run along the ductwork to other parts of the building. Removing it is the whole point. We are often asked to deal with heavy grease at the base of a riser and gaps where access panels were never fitted, on multi-storey ducts, vertical risers and horizontal duct runs.
Kitchens around a place like Shalmsford Street are often in older buildings or single-storey extensions, where the duct may cross a roof void or climb an outside wall. Long horizontal runs like that hold grease and need access panels to reach.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we’re fully insured. We are also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.
- Location
- Shalmsford Street (CT4)
- Wider area
- Kent
- Reporting
- TR19® certificate and photo report
- Quotes
- A fixed price before we start
- Hours
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Checked
- 30 October 2026
What staff can safely do
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but the parts you can’t see still need a specialist at the right interval.
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. That’s our job.
Shalmsford Street questions
Will you come out to Shalmsford Street?
Yes. Villages and rural sites across the South East are part of our work, Shalmsford Street included. Let us know about access, parking and anything unusual about getting there when you book.
Who is the fire and rescue service for Shalmsford Street?
Fire safety enforcement in Shalmsford Street is handled by Kent Fire and Rescue Service. A recent cleaning certificate and a note of the next clean date show that grease in the extract is being managed.
Can you set up regular visits?
Yes, of course. Tell us what you have and how it’s used and we will propose a schedule with a fixed quote.
Where does the waste go?
It leaves the site with us when we go. During the work, it’s contained so the area stays clean.
Is a quote from photos possible?
Yes, where the photos show enough. If not, a site survey comes first, and the quote follows that.
How often should kitchen ducts be cleaned?
It follows the same interval as the whole extract, from every 3 months for heavy use to every 12 months for light use. Grease thickness testing shows whether that is often enough.
Will the duct clean disrupt the kitchen?
We plan the clean when you are not cooking. Most kitchens book overnight or weekend cleans, so no service is lost.
What do you do to protect the area?
With sheeting and covers, before anything else happens. The work is kept contained and leave the area clean.
When to call us in Shalmsford Street
Grease settles fastest where the air slows down. Flat runs, bends, reducers and the base of risers are the usual hotspots, and those are the points we pay most attention to.
Any of these means the system needs a check-up:
- A duct clean needed for an insurer
- Hardened, baked-on grease in long horizontal runs
- Smells of old cooking grease from the ductwork
- Fat dripping from the ductwork
Church and community hall kitchens, near Church of St Mary or anywhere around Shalmsford Street, are easy to forget, but their extracts collect grease like any other.
Comparing quotes
- Whether the whole system is included, or only the parts that are easy to reach
- Whether they recommend a next date
- Proof of accreditation you can verify
- Whether a survey comes first
Why it’s worth doing now in Shalmsford Street
Insurers know the risk of a greasy duct. Many require cleaning to TR19, and they can refuse or reduce a claim without proof. Your certificate and photo report show the ducts were cleaned. A site near Shalmsford Street that has to close at short notice is hard to cover for.
Several systems or sites on one quote often makes better use of the time. Mention every system or site you need covered and we’ll price it together.
What you get with us
- Accredited under CHAS and SafeContractor, with ISO 9001
- We diagnose before we treat
- Trading since 2009
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
Ductwork cleaning around Shalmsford Street
We cover Shalmsford Street, about 51 miles from central London, as part of our work across London and the South East. Evening, overnight and weekend visits are all possible. It’s Canterbury City council that sends environmental health officers to food businesses in Shalmsford Street. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. Our report lists what was cleaned and when, which is useful to have ready.
If you look after a school kitchen, at a school such as Chartham Primary School or anywhere near Shalmsford Street, the holidays are the usual time for a TR19® clean. Healthcare kitchens cannot easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Shalmsford Street is Kent and Canterbury Hospital, about 3.2 miles east.
Shalmsford Street is about 3 miles south-west of Canterbury, in Kent. We provide ductwork cleaning for businesses, landlords and public buildings in Shalmsford Street and the rest of Kent. Our Kent coverage runs to 922 places, Shalmsford Street among them. Maidstone is in our area too, about 21 miles from Shalmsford Street.
Every address in CT4 is covered for ductwork cleaning, from the main roads to the quietest streets. Whether your site is on Old Church Road, Pomfret Road and Summer Piece Grove or anywhere close by, our technicians can take on the work. We also cover the places around Shalmsford Street: Chartham (1 mile north), Mystole (1 mile west), Garlinge Green (1 mile south), Chartham Hatch (1 mile north) and Thanington (2 miles north-east). Further out, we also cover Ashford (10 miles south-west), Canterbury (3 miles north-east), Dover (14 miles south-east), Sittingbourne (14 miles north-west), Folkestone (13 miles south-east) and Whitstable (7 miles north).
What’s near Shalmsford Street
We work in commercial kitchens and buildings around The Artichoke Inn and Broadham Down and the streets around them. The closest station to Shalmsford Street is Chartham station, about 0.5 miles north. Nearby you’ll also find Chilham Castle (2.6 miles west) and Whitefriars Shopping Centre (3.3 miles north-east). Open spaces near Shalmsford Street include Blean Woods RSPB Reserve.
Towns and villages near Shalmsford Street
What else we do in Shalmsford Street
What affects the cost of ductwork cleaning
There’s no set price list, because sites vary so much. What we look at:
- Working hours and out-of-hours timing
- Any permits to work or inductions
- One-off work versus a regular cycle
- How easy every part is to reach
Working hours, access and the scale of the site all affect the cost. We take each of them into account, and the price is fixed before work begins.
What we need to know
We can often survey from photos. The most useful are:
- Your last certificate, test record or report
- The postcode and the type of business
- How we’d reach plant on a roof or in a plant room
- Problems your staff have spotted
Quoting starts with a diagnosis, either from pictures and details you send or from a site visit. Then we send a fixed price so you know the cost before work begins.
What a clean will not put right
We will always give you a straight diagnosis, so here’s what this work can’t put right:
- A failed fan motor at the end of the duct (a fan repair job)
- A duct that is too small or badly routed for the kitchen (a design issue)
- A damper stuck open in the duct
If in doubt, give us a ring on 0345 646 2711 or drop us a line and we’ll say what we think.
Where we work
- Horizontal duct runs
- Access panels
- Vertical risers
- Attenuators
- Bends and junctions
- Multi-storey ducts
How it works
There are three stages on the day: getting the area ready, doing the work and signing it off. Getting ready means protecting surfaces and switching off what needs to be off, while signing off means the written report and photos. The middle part takes longest, and that takes anything from a few hours to several visits, depending on the length of duct. Visits to a place like Shalmsford Street are planned ahead, so we arrive with what the survey says the job needs.
- We trace the duct and find every way in.
- We take grease readings along the route.
- Out of hours, the area is protected and the access panels opened.
- Heavy deposits come out by hand, then each section is degreased.
- Panels are closed, readings and pictures repeated, and unreachable sections recorded.
Preparing for the visit
- Let us know how we reach the system, including roofs, risers and plant rooms
- Tell us where we can park and unload
- Tell us the best time to work, such as after service or at a weekend
Getting a quote
Some systems can be priced from pictures; others need a survey. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, you get a fixed price before work begins.