Kent · Ductwork cleaning
Ductwork Cleaning in Seasalter
Ductwork cleaning in Seasalter from ventilation hygiene specialists trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Grease seeping out of the duct seams
- An insurer asking for TR19 evidence
- Sections of duct with no access panels
Between visits
Think of this as the after-treatment advice, short and simple:
- Never cook with a filter missing
- Keep access panels clear of stored items
- Flag drips from the duct straight away
- File each certificate and photo report in the maintenance log
Any section of duct we couldn’t reach is listed on the report and why. We can fit access panels so those sections are cleaned next time.
Run the extract the whole time the kitchen is cooking. Moving air carries vapour through rather than letting it settle, so switching off early adds to the build-up.
About our ductwork cleaning in Seasalter
The ductwork is where an extract clean is won or lost. Sections with no way in can go uncleaned for years. Each section we can reach is cleaned, and any we can’t is written down, so you know exactly where you stand. The work covers bends and junctions, horizontal duct runs and multi-storey ducts, and common reasons people get in touch are gaps where access panels were never fitted and duct runs with no cleaning record.
Work in a small place like Seasalter starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
Nothing is signed off by word of mouth: a written report, dated and illustrated with pictures, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. Any parts we couldn’t reach are recorded on it too.
- Place
- Seasalter (CT5)
- Region
- Kent
- Paperwork
- Certificate plus before-and-after pictures
- Price
- Fixed quote, normally within a working day
- Hours
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
Part by part
Vertical risers
A riser takes the duct up through one or more floors. Grease collects on the walls and at the foot of the riser, so the base is one of our test points.
Bends and transitions
Grease tends to pile up at elbows. It’s scraped out and degreased, and readings are taken there before and after.
Why it’s worth doing now in Seasalter
A fire in a greasy duct is hard to reach and hard to stop. It can travel through the ductwork to other parts of the building, which is why the duct matters as much as the canopy. In a place like Seasalter, ductwork and fans are easy to forget until something goes wrong.
The price reflects the work, not guesswork. That’s why we survey first, from photos or on site, and why the quote is fixed before we start.
What you get with us
- CHAS and SafeContractor accredited, with ISO 9001
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- We diagnose before we treat
- Fully insured
Take a look at what affects the cost and our accreditations.
How the visit works
At the end of the visit, someone from your team can look over the work with us. Anything we couldn’t reach or that needs attention is pointed out there and then, and the same goes into the written report. All told, the work takes a shift or more, depending on the length of the runs and the number of access points. Seeing the system in photos first means the trip to Seasalter can be planned properly.
- The duct route is surveyed and every access point found.
- We take grease readings along the route.
- Out of hours, the area is protected and the access panels opened.
- Heavy deposits come out by hand, then each section is degreased.
- We close up, re-test, photograph and record anything out of reach.
Before we arrive
- Find the previous report, if there is one
- Move anything stored near the system
- Tell us about site rules, permits or sign-in
How to get a quote
Quotes are quick. Call or email with a few details and you will typically have a fixed price within one working day. If we need to see the system first, we book a survey around your hours.
Related advice
How we price ductwork cleaning
We quote each job individually. This is what makes a difference:
- How easy every part is to reach
- One-off work versus a regular cycle
- Working hours and out-of-hours timing
- The condition we find in the survey
No two sites are the same, so we price each one individually. Size, access, the condition of the system and when we can work all make a difference.
What we need to know
You don’t need the technical terms. Just send:
- Any access panels or hatches you can see
- The site address and the type of premises
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Any symptoms, from odd noises to smells or leaks
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
For landlords and multi-site operators
Keeping records across a portfolio is half the battle. Each visit ends with a dated report and pictures, so you can show an insurer or inspector what was done at each site.
For anyone managing more than one site, we can schedule visits across all of them on one quote. Each site gets its own report and photos, so records stay tidy.
Common questions in Seasalter
Can you clean school kitchen extracts in Seasalter during the holidays?
Yes, and it’s the easiest time to do it. Around Seasalter, the Food Standards Agency lists about 6 schools and colleges with registered kitchens within a mile and a half or so. Send us your term dates when you call 0345 646 2711 or drop us a line, and we will fit the work in.
Which fire service covers Seasalter?
Seasalter is in the area of Kent Fire and Rescue Service. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
Do you work with multi-site operators?
Yes. We work across South East England and London, so we can schedule a run of sites on one programme. Each site gets its own report and photos.
Where does the waste go?
Anything we remove is contained as we work and taken away with us, including grease, debris and dirty water. We do not leave it behind.
Are you fully insured?
Yes, fully. We also hold CHAS and SafeContractor, for sites that check contractor safety.
How long does it take to clean extract ducts?
Short runs are quick, but long or complex ducts may take several visits. Visits are planned out of hours.
What happens if you cannot reach some of it?
We record them on the report, with a note of where it is, and we tell you what would make it reachable, for example new access panels.
What’s the cleaning interval for extract ductwork?
At least as often as BESA guidance sets for your cooking hours. Heavy use of 12 to 16 hours a day means at least every 3 months, while lighter use can go longer.
Towns and villages near Seasalter
More services for Seasalter
What your team can do, and what needs us
When your team notices a problem between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, it’s best reported rather than tackled in-house. We will take a look and send you a fixed quote.
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. Leave those to us.
Grease, kitchens and Seasalter
The coast is only about 1 mile from Seasalter. Near the sea, the fan and discharge at the top of a kitchen extract corrode faster than they would inland. The FSA’s food hygiene register includes about 29 bars, pubs and nightclubs in and around Seasalter, up to about a mile and a half out. A pub or hotel kitchen that cooks every day builds up grease in its extract like any other. Food hygiene inspections in Seasalter are the job of Canterbury City council’s environmental health team. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. A dated certificate in the maintenance file answers the question before it’s asked.
Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; Whitstable and Tankerton Hospital is the nearest hospital to Seasalter, about 2.5 miles north-east. Term dates shape school work: for a school like Joy Lane Primary Foundation School, an extract clean fits neatly into a half-term or summer break. Church and community hall kitchens, near Seasalter Christian Centre or anywhere around Seasalter, are easy to forget, but their extracts collect grease like any other.
Seasalter is about 2 miles west of Whitstable, in Kent. Sites in Seasalter get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with pictures. Across Kent, we cover 922 places, and Seasalter is one of them. Our Maidstone page covers sites nearby (21 miles or so).
Our technicians cover all of CT5 for ductwork cleaning and the roads nearby. Whether your site is on Eden Road, Allan Road and Church Lane or anywhere close by, we can help. We also cover the places around Seasalter: Highstreet (1 mile south), Waterham (2 miles south-west), Dargate (2 miles south), Graveney (3 miles south-west) and Hernhill (3 miles south-west). Further out, we also cover Ashford (15 miles south), Canterbury (6 miles south-east), Sittingbourne (11 miles west), Faversham (5 miles south-west), Herne Bay (6 miles east) and Minster (10 miles north-west).
Around Seasalter
In Seasalter, that means kitchens and buildings near The Jolly Sailor pub, The Whitstable School and Seasalter Levels. The nearest railway station is Whitstable station, about 1.8 miles north-east. A little further out are Tankerton Castle (2 miles north-east) and Whitstable and Tankerton Hospital (2.5 miles north-east). For a walk, there’s Blean Woods RSPB Reserve.