East Sussex · Ductwork cleaning
Rye Harbour ductwork cleaning
Ductwork cleaning for Rye Harbour and the surrounding area: diagnosis first, then a fixed quote, the work and a report with photos. Ask us for a fixed quote.
- A duct clean needed for an insurer
- A grease test showing the duct is overdue
- Thick crusts of old grease along the duct
In-house cleaning or a specialist?
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. Inside the ducts, risers and fan is specialist work, and that is where we come in.
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Ductwork cleaning in Rye Harbour, done properly
No two duct runs are the same, in Rye Harbour or anywhere else. Some run a short distance to an outside wall, others climb several floors to the roof. The survey traces the route and finds every access point before we quote. We’re often asked to deal with gaps where access panels were never fitted and thick crusts of old grease along the duct, on attenuators, horizontal duct runs and bends and junctions.
In a small place like Rye Harbour, kitchens are often in older or extended buildings, with long single-storey duct runs, and those horizontal sections are where grease settles. We agree access and timings in advance.
We have been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we carry full insurance.

- Place
- Rye Harbour (TN31)
- Wider area
- East Sussex
- Reporting
- Certificate plus before-and-after photos
- Quote
- Fixed quote, typically within a working day
- Working hours
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
What affects the quote in Rye Harbour
The diagnosis comes before the price. We look at:
- Site requirements such as sign-in and permits
- One-off work versus a regular cycle
- How many systems or sites are involved
- The condition of the system
When the work has to happen, how we reach it and how big the site is all affect the cost. Each of those is built into the quote, and the price is fixed before work begins.
What we need to know
Photos let us diagnose from a distance. Try to include:
- When the site is open and when it’s quiet
- The roof, plant room or outside wall the system runs to
- Any previous report or certificate
- The site address and the type of premises
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Nearby places to Rye Harbour
Other services in Rye Harbour
Keeping the system healthy
No system stays clean for ever, but care slows the build-up. Our tips:
- Tell us if grease leaks from the ductwork
- Never cook with a filter missing
- Leave a way through to the access panels
- Book the next clean before the recommended date
Access panels are closed and sealed back up after cleaning, and the surrounding area is left clean. Waste grease and water are taken away.
Book the next duct clean before the date passes. If the kitchen starts cooking longer hours, the interval may need to shorten, and grease thickness testing will show it.
The process
When we arrive, we check the system against the survey or the pictures you sent. Anything unexpected is raised with you before we go further. After that, the work takes from a few hours to more than one visit, depending on duct length and access. The timing of a visit to Rye Harbour is set by you, and the travel is our side of the planning.
- Diagnosis: a survey of the duct’s route, size and access.
- You get a fixed price before work starts.
- Each section is cleaned in turn through its access panel.
- We take extra care at bends and at the foot of risers.
- Readings, photos and a recommended next clean date complete the job.
Preparing for the visit
- Plan for cooking equipment or plant to be off before we arrive
- Arrange a key holder or contact on site
- Mention any sign-in, permit or induction we need
Ask for a quote
Getting a quote does not take long. Call or email with a few details and you will usually have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
Related advice
What a clean will not put right
Before you book, it helps to know what’s not included:
- Ductwork that was poorly designed
- Parts of the duct with no way in
- An extract fan that has stopped working
If in doubt, give us a ring on 0345 646 2711, or email photos and we’ll say what we think.
What the work covers
- Multi-storey ducts
- Bends and junctions
- Vertical risers
- Attenuators
- Access panels
- Horizontal duct runs
Rye Harbour: your questions answered
Who is the fire and rescue service for Rye Harbour?
Rye Harbour is in the area of East Sussex Fire and Rescue Service. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
Can the work in Rye Harbour be done at night or at weekends?
Yes, nights and weekends are routine for us. The work in Rye Harbour can fit around your hours. Just give us a ring on 0345 646 2711 or send us an email with your opening times and we will plan around them.
What types of premises do you cover?
Commercial premises of every kind: kitchens, offices, schools, healthcare, retail, leisure and food production. We fit the work around how the site operates.
How much does ductwork cleaning cost?
There’s no set price, as it depends on the job: how big it is, what state it’s in, how we reach it and the working hours. You get a fixed price before we start.
Do you work in Rye Harbour?
Yes. Rye Harbour is part of the area we cover, as part of our area across London and the South East.
What happens if you can’t reach some of it?
They’re listed in the report, never skipped quietly. The report says which parts couldn’t be reached and why, along with a quote to put access in.
Can we book visits on a schedule?
Yes. Regular plans can run on 3, 6 or 12-monthly cycles, depending on what the system needs.
Do you have insurance?
Yes. We are fully insured, and the details are available on request.
Ductwork cleaning around Rye Harbour
Rye Harbour is within about 1 mile of the coast. Near the sea, the fan and discharge at the top of a kitchen extract corrode faster than they would inland. Look up Rye Harbour on the FSA’s food hygiene register and you’ll find about 47 restaurants, cafés and canteens and about 7 sandwich bars and takeaways within roughly a mile and a half of the centre of Rye Harbour. Where they cook under a canopy, grease does not stop at the filters: it settles along the duct and up the riser. In Rye Harbour, food businesses are inspected by environmental health officers from Rother council. Extraction counts as kitchen equipment, so its condition can come up on the day. Our report lists what was cleaned and when, which is useful to have ready.
Bursars and site managers at schools such as Rye College tend to book extract cleaning for when the kitchen is empty. If you run catering at a historic house or estate in the area (Lamb House is about 1.4 miles north-west), event kitchens in older buildings often have awkward duct runs that need planning. Church and community hall kitchens, near The Church of the Holy Spirit or anywhere around Rye Harbour, are easy to forget, but their extracts collect grease like any other.
Rye Harbour is about 10 miles north-east of Hastings, in East Sussex. From the centre of Rye Harbour to the outskirts, ductwork cleaning is available to all kinds of commercial premises, from small sites to large estates. Our area takes in 289 places across East Sussex, large and small. There’s also a page for Maidstone, roughly 25 miles from Rye Harbour.
Postcode districts we cover here for ductwork cleaning: TN31. If you need ductwork cleaning at premises on Tram Road, Camber Road and Oyster Creek or a nearby road, we can help. Close by, we work in Rye (1 mile north-west), Camber (1 mile east), East Guldeford (1 mile north), Playden (2 miles north-west) and Houghton Green (2 miles north). We also work in nearby towns such as Hastings (10 miles south-west), Bexhill-on-Sea (14 miles south-west), St Leonards (11 miles south-west), Hastings Old Town (9 miles south-west), Belmont (9 miles south-west) and Hollington (10 miles south-west).
Around Rye Harbour
We work in commercial kitchens and buildings around Inkerman Arms and Rye Harbour LNR. The closest station to Rye Harbour is Rye station, about 1.5 miles north-west of the centre. Nearby you’ll also find Rye Castle Museum (East Street) (1.3 miles north-west) and Camber Castle (1.2 miles west). Not far away are Rye Harbour Nature Reserve.
Managing agents and facilities teams in Rye Harbour
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. With shared responsibility, good records help everyone.
We also work for facilities teams across offices, schools and healthcare in Rye Harbour and across East Sussex. Larger estates can be phased building by building to keep disruption down.
How the job changes from site to site
Multi-storey and shared buildings
A fire in a duct in a shared building can affect far more than one kitchen, which makes keeping it clean all the more important. The paperwork suits landlords and managing agents.
Access panels
Extra panels can be installed where there are gaps, making future cleans more complete. The survey shows where they’re needed.