Hertfordshire · Ductwork cleaning
Duct cleaning in Radlett
One call covers ductwork cleaning in Radlett, from survey to sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Sections of duct with no access panels
- A duct nobody has opened in years
- Fat dripping from the ductwork
Ductwork cleaning for kitchens and businesses in Radlett
Many ducts were installed with too few access doors. Where a section can’t be reached, TR19 expects it to be recorded on the report, and we can fit new access panels so it’s cleaned next time. It’s better to know than to assume. If you’re dealing with an insurer asking for TR19 evidence and a rancid smell from the extract duct, we can put it right, from vertical risers, multi-storey ducts and access panels onwards.
For a smaller kitchen near Radlett, a TR19® clean is the same job as anywhere: canopy, filters, plenum, duct, fan and discharge. The visit is booked around your opening hours, and the journey is planned ahead.
We have been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we are fully insured.
- Location
- Radlett (WD7)
- Wider area
- Hertfordshire
- Reporting
- TR19® certificate and photo report
- Quote
- A fixed quote up front
- Hours
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026

Common problems we fix in Radlett
Grease filters that don’t seal let fat straight through. More grease reaches the ductwork than it should and it fills faster.
These are the problems we see most often:
- Sections of duct with no access panels
- A duct nobody has opened in years
- Fat dripping from the ductwork
- Heavy grease at the base of a riser
Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; Shenley Hospital is the nearest hospital to Radlett, about 1.4 miles north-east.
What your quote should include
- Exactly which parts of the system are covered
- How they set the interval to the next visit
- Which accreditations they hold, and whether you can check them
- What records you will receive afterwards
FAQs for Radlett
Is Radlett within the area you cover?
Yes. Villages and rural sites across the South East are part of our work, Radlett included. Photos of the system and directions to the site help us plan the visit.
Can you come to Radlett after we close?
Yes, out-of-hours work is a big part of what we do. The work in Radlett can fit around your hours. Just call 0345 646 2711 or email us with your opening times and we’ll plan around them.
How do you clean inside the ductwork?
We survey the route, test the grease, then open the access panels. We clean the runs and risers section by section, and test again when we’re done.
Is a quote from photos possible?
Yes, for many jobs. Send a few wide photos plus close-ups of panels, filters or grilles, and we typically come back within one working day. If photos aren’t enough, we’ll survey first.
How do you protect the area?
Floors and surfaces near the work are sheeted before work begins, and anything we remove is contained. Before we leave, we tidy up and clean down.
What shows that the ducts need a clean?
A grease thickness test gives the answer. Readings are taken by Wet Film Thickness Test (WFTT) or Deposit Thickness Test (DTT). A mean above 200 microns, or 500 microns at any point, means it’s due.
What happens if you cannot reach some of it?
They’re marked on the report. Often the fix is extra access, such as new panels in ductwork, and we can fit those.
Will I get a report after the ducts are cleaned?
Every clean comes with a photo report, and a full TR19 clean also comes with a certificate issued through the BESCA Vent Hygiene Elite portal. File them with the fire risk assessment.
Aftercare tips
Here’s the after-treatment advice, in brief:
- Keep grease filters clean and fitted whenever you cook
- Book the next clean before the recommended date
- Leave a way through to the access panels
- Flag drips from the duct straight away
The report names every part of the duct that couldn’t be reached and why. We can fit access panels so those sections are cleaned next time.
Watch for warning signs between cleans: grease leaking from duct joints, smells, or a fan that sounds rough. Testing will show whether any section has reached 500 microns.
Staff cleaning versus specialist work
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. That’s our job.
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. The inside of ducts and units needs a specialist.
Why it’s worth doing now in Radlett
Dealing with the ductwork in Radlett now beats dealing with it after a problem. The work takes a shift or more, depending on the length of the runs and the number of access points, and we work evenings, overnight and weekends. Booking now means the visit to Radlett is planned around you, not forced by a breakdown.
Every site is different, so we price each one individually. Size, access, the condition of the system and when we can work all make a difference.
Why book with us
- Full insurance on every job
- We diagnose before we treat
- Evenings, overnight and weekends, plus 24/7 emergency callout
- Accredited under CHAS and SafeContractor, with ISO 9001
Take a look at our cost guide or our accreditations and certificates.
What the work involves, part by part
Vertical risers
Cleaning a riser needs access along its height. Where it cannot be reached safely, the report says so.
Attenuators and discharge
Some systems have attenuators to reduce noise, and their linings can soak up grease. We clean what can be reached and note anything that cannot.
Ductwork cleaning in Radlett: the local picture
According to Food Standards Agency records, there are about 6 bars, pubs and nightclubs within roughly a mile and a half of the centre of Radlett. Breakfasts, bar meals and functions all put grease into the extract wherever they’re cooked. Radlett is covered by Hertfordshire Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises. Kitchens in Radlett get their food hygiene inspections from Hertsmere council. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. A dated certificate in the maintenance file answers the question before it’s asked.
If you cook for passing trade around Radlett station, the extract can be cleaned between your last and first customer. Bursars and site managers at schools such as St John's Church of England Infant and Nursery School tend to book extract cleaning for when the kitchen is empty.
Radlett is about 3 miles north-west of Borehamwood, in Hertfordshire. We carry out ductwork cleaning for businesses, landlords and public buildings in Radlett and the rest of Hertfordshire. Our Hertfordshire coverage runs to 381 places, and Radlett is one of them. We also work in London, about 16 miles from Radlett.
Postcode districts we cover here for ductwork cleaning: WD7. If you need ductwork cleaning at premises on Upper Station Road, Station Road and Barn Close or a nearby road, we can help. Being close to the B462 and A5183, Radlett is easy for our technicians to reach for ductwork cleaning. We also cover the places around Radlett: Kemprow (1 mile west), Round Bush (1 mile south-west), Letchmore Heath (1 mile south-west), Aldenham (2 miles south-west) and Patchetts Green (2 miles south-west). Larger places within reach include Watford (4 miles south-west), Hemel Hempstead (8 miles north-west), St Albans (5 miles north), Welwyn Garden City (10 miles north-east), Harpenden (9 miles north) and Hoddesdon (14 miles east).
Landmarks near Radlett
We work in commercial kitchens and buildings around The Cat And Fiddle Public House, among other places. Radlett has its own railway station: Radlett station. Other landmarks nearby include Radlett and District Museum (less than half a mile south-east) and Harlequin Centre (3.7 miles south-west). Green spaces nearby include Verulamium Lake and Broad Colney Lakes.
When something else is needed
Ductwork cleaning cannot fix everything, and we’d rather say so up front. It will not put right:
- Ductwork that was poorly designed
- An extract fan that has stopped working
- Leaking duct joints that need repair
If you are not sure, just phone us on 0345 646 2711, or send details by email and we will give you a straight answer.
What we work on in Radlett
- Multi-storey ducts
- Horizontal duct runs
- Attenuators
- Access panels
- Bends and junctions
- Vertical risers
Other services in Radlett
How the visit works
At the end of the visit, someone from your team can look over the work with us. We point out anything that couldn’t be reached or needs a follow-up, and the same goes into the written report. The visit takes anything from a few hours to several visits, depending on the length of duct. Everything the job in Radlett needs is worked out beforehand, from the survey.
- Diagnosis: a survey of the duct’s route, size and access.
- You get a fixed price before work starts.
- We clean section by section, working from panel to panel.
- We take extra care at bends and at the foot of risers.
- The duct is signed off with readings, pictures and a next clean date.
How to prepare
- Dig out any earlier paperwork for the system
- Arrange a key holder or contact on site
- Agree a time when the area can be out of use
Ask for a quote
To get a fixed quote, phone us on 0345 646 2711 or email us with the site type, your trading hours and a short description of the system. A few pictures and your last certificate or report help a lot. We normally come back within one working day.