Medway · Ductwork cleaning
Ductwork cleaning in Park Wood, Medway
Cleaning of kitchen extract ductwork, horizontal runs and vertical risers through access panels in Park Wood, surveyed first and signed off with a written report and photos. Ask us for a fixed quote.
- Grease leaking from duct joints
- Gaps where access panels were never fitted
- Heavy grease at the base of a riser
Ductwork cleaning in Park Wood
Ductwork in Park Wood is cleaned the same thorough way as everywhere else we work: we test the grease first, remove thick deposits by hand and degrease what’s left. Readings are taken again afterwards and pictures go into your report. The work covers vertical risers, multi-storey ducts and horizontal duct runs, and the jobs we see most are thick deposits at the bottom of a vertical duct and grease seeping out of the duct seams.
For a smaller kitchen near Park Wood, a TR19® clean is the same job as anywhere: canopy, filters, plenum, duct, fan and discharge. We plan the visit around your hours, with the journey sorted in advance.
Good records are part of the job. You get a written report with photos after every visit, covering the work done, any areas we couldn’t access and a recommended next date. Keep it with your fire safety records so it’s to hand when an insurer or inspector asks.
- Place
- Park Wood (ME8, ME9)
- Wider area
- Medway
- Reporting
- Certificate plus before-and-after photos
- Quotes
- Fixed quote, typically within a working day
- When we work
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Checked
- 30 October 2026
What we do, step by step
A visit follows the same order every time: protect the area, make the system safe, do the work, tidy up and leave you the report. The visit itself takes a shift or more, depending on the length of the runs and the number of access points. For a site near Park Wood, the work is booked around your opening hours, evenings and weekends included.
- We map the duct route and check where the access panels are.
- We measure grease thickness at set points before cleaning.
- We open the panels and scrape out the heaviest grease.
- Horizontal runs and risers are then degreased by the method that suits the deposit.
- Post-clean readings and photos go into the report, with any unreachable section listed.
Preparing for the visit
- Tell us the best time to work, such as after service or at a weekend
- Name a contact who can let us in at the agreed time
- Move anything stored near the system
How to get a quote
For a fixed quote, phone us on 0345 646 2711 or email us with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. You’ll typically have a quote within one working day.
Advice
What the work involves, part by part
Horizontal duct runs
Grease settles on the floor of a flat duct run. We scrape out the heavy layer first, then the walls and roof are cleaned too.
Vertical risers
In taller buildings, a riser may pass through several floors and fire compartments, so fire dampers may be fitted where it crosses them. We test those as a separate job.
Staff cleaning versus specialist work
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, it’s best reported rather than tackled in-house. We will take a look and give you a fixed quote.
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but the parts you cannot see still need a specialist at the right interval.
Kitchen extracts in Park Wood
The FSA’s food hygiene register includes about 12 pubs and bars in and around Park Wood, up to about a mile and a half out. Where they serve hot food, their kitchen extracts need cleaning to TR19® like any restaurant’s. Kent Fire and Rescue Service covers Park Wood. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises. Environmental health officers from Medway council inspect food businesses in Park Wood. Extraction counts as kitchen equipment, so its condition can come up on the day. Our report lists what was cleaned and when, which is useful to have ready.
School kitchens, at schools like Park Wood Infant School for example, are usually cleaned in the holidays so no lunches are lost. Church and community hall kitchens, near St Paul's Church or anywhere around Park Wood, are easy to forget, but their extracts collect grease like any other.
Park Wood is about 2 miles south-east of Gillingham, in Medway. Every kind of commercial site in Park Wood, we can take on ductwork cleaning. Visits can be booked for evenings, overnight or weekends so the site keeps running. Park Wood is one of 68 places in Medway we cover for commercial clients. For sites nearby, see our Maidstone page, about 6 miles away.
Postcode districts we cover here for ductwork cleaning: ME8 and ME9. Streets in the area include Beke Road, Bond Road and Nares Road, all of which we cover for ductwork cleaning. We also cover the places around Park Wood: Wigmore (1 mile north), Kemsley Street (1 mile south-west), Hempstead (1 mile west), Bredhurst (1 mile south-west) and Scragged Oak (2 miles south). Further out, we also cover Chatham (3 miles west), Rochester (5 miles north-west), Strood (6 miles north-west), Luton (3 miles north-west), Hoo St Werburgh (6 miles north) and Chatham Waterfront (4 miles north-west). Park Wood is one of the larger places we cover in Medway for ductwork cleaning.
Near you in Park Wood
Around Park Wood, our work takes us to kitchens and buildings near Howard School, Foxburrow Wood and Rainham School for Girls, among other places. Park Wood’s nearest station is Rainham (Kent) station, about 1.5 miles north of the centre. A little further out are Medway Maritime Hospital (3.4 miles north-west). Open spaces near Park Wood include Bishop Saltings and Detling Hill.
Also near Park Wood
Also in Park Wood
Why deal with it now?
Under BESA guidance, the mean grease level should stay at or below 200 microns between cleans. A reading of 500 microns or more at any point means a spot clean straight away. Putting off the clean only pushes readings higher. A site near Park Wood that has to close at short notice is hard to cover for.
The price reflects the work, not guesswork. That’s why every job is surveyed first, and the price is agreed before any work starts.
Why us?
- Accredited under CHAS and SafeContractor, with ISO 9001
- Evenings, overnight and weekends, plus 24/7 emergency callout
- Fully insured
- Every job surveyed first
Take a look at what affects the cost or how to check a contractor.
Do you need ductwork cleaning in Park Wood?
Air cools as it moves away from the canopy. As it cools, the grease it carries condenses onto the duct walls, so duct runs keep collecting grease long after the canopy.
Clients typically contact us when they notice something like this:
- Duct runs that can’t be reached
- A rancid smell from the extract duct
- Fat dripping from the ductwork
- Readings above 200 microns from a grease thickness test
Restoration House, about 4.9 miles north-west, is one of the historic houses near Park Wood; if you run event catering at a venue like that, cleans can be booked between functions.
Questions to ask before you book
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- What’s included in the scope, part by part
- Whether they recommend a next date
- What paperwork you get at the end
Between visits
Once we’ve finished, these simple steps help:
- Flag drips from the duct straight away
- Keep the fan on while anything is cooking
- Make sure filters are seated properly
- File each certificate and photo report in the maintenance log
You’ll have a recommended date for the next clean, worked out from the grease we found and how long you cook each day, in line with BESA guidance.
Keep the fan on throughout service. Moving air carries vapour through rather than letting it settle, so switching off early adds to the build-up.
Fixed quotes for ductwork cleaning in Park Wood
Before we fix a price, we need to know a few things. We look at:
- The times the site is available
- How easy every part is to reach
- The condition of the system
- Travel, parking and unloading
Several systems or sites on one quote can make for a more efficient booking. Mention every system or site you need covered and we will price it together.
Helping us quote
To speed up the quote, please include:
- Close-ups of filters, grilles, hatches or access panels
- Your opening hours and when the area is out of use
- Your last certificate, test record or report
- Where the plant sits or the system leaves the building, such as a roof or outside wall
We do not publish a price list, because every site is different. Instead, we look at your site first, from photos or a survey, and then give you a fixed quote. To get going, phone us on 0345 646 2711 or use the quote form.
Park Wood questions
Who is the fire and rescue service for Park Wood?
Park Wood is in the area of Kent Fire and Rescue Service. It’s worth keeping your fire risk assessment, TR19® certificates and photo reports together, ready to show.
Is Park Wood within the area you cover?
Yes, smaller places are covered as well as towns. Let us know about access, parking and anything unusual about getting there when you book.
What’s involved in cleaning extract ducts?
We survey the route, test the grease, then open the access panels. Each run and riser is scraped and degreased, then the readings are repeated.
How often should kitchen ducts be cleaned?
BESA guidance sets minimum intervals by daily cooking hours: 3-monthly for heavy use, 6-monthly for moderate and 12-monthly for light use. Grease readings may show it needs doing sooner.
Can one contract cover all our sites?
Yes. We work across South East England and London, so sites at different addresses can be planned together on one programme. Every site has its own report.
What do you do with what you remove?
We contain it and take it with us. Grease, debris and waste water are collected as the work goes on rather than letting it spread.
Will the duct clean disrupt the kitchen?
When the kitchen is closed. Long ducts can be split across visits, with the kitchen ready to cook each morning.
How do you keep the site clean during the work?
By covering it before any work starts. The work is kept contained and leave the area clean.