Surrey · Ductwork cleaning
Mill Lane ductwork cleaning
Specialist ductwork cleaning for Mill Lane: a survey, a fixed price, careful work and proper paperwork. Ask us for a fixed quote.
- Grease leaking from duct joints
- Smells of old cooking grease from the ductwork
- Sections of duct with no access panels
About our ductwork cleaning in Mill Lane
Nobody sees duct grease building, so nobody notices it until something goes wrong. A flare-up drawn up from the range can light it, and fire can then run along the ductwork to other parts of the building. Cleaning the duct takes that fuel away. Common call-outs are for duct runs with no cleaning record and readings above 200 microns from a grease thickness test, on bends and junctions, access panels and attenuators.
In a village or hamlet like Mill Lane, the kitchens that need extract cleaning are usually a pub, a school, a care home or a hall kitchen, wherever there is one. Every one of them still needs its extract kept clear of grease.
Insurers, fire officers and environmental health officers all look at records. That is why every job is written up in a report with photos, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Location
- Mill Lane (GU10)
- Region
- Surrey
- Reporting
- Certificate plus before-and-after photos
- Quotes
- A fixed price before we start
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
Your questions about ductwork cleaning in Mill Lane
Can school kitchens in Mill Lane be cleaned in the holidays?
Yes. The holidays are the usual time for school work. With about 3 schools and colleges on the FSA’s register within roughly a mile and a half of Mill Lane, it pays to plan holiday dates ahead. Booking early in the term gives the best choice of holiday dates.
Is Mill Lane within the area you cover?
Yes, Mill Lane is part of our area, however small the site. The journey is planned ahead, so a few details about the route help.
Will I get a report after the ducts are cleaned?
Readings, pictures and, for a full clean, a TR19 certificate. The report says when the next clean is due.
Do you work with multi-site operators?
Yes. Our area covers London and the South East, so sites at different addresses can be planned together as one programme. Each site gets its own report and pictures.
How can I tell if my extract ducts are dirty?
A grease thickness test gives the answer. Readings are taken by Wet Film Thickness Test (WFTT) or Deposit Thickness Test (DTT). BESA guidance says the mean shouldn’t exceed 200 microns, and 500 or more anywhere needs immediate spot cleaning.
How long does it take to clean extract ducts?
Allow a few hours for a short run, longer for long runs and tall risers. The survey tells us how long your duct needs.
How often should kitchen ducts be cleaned?
It follows the same interval as the whole extract, ranging from 3-monthly to 12-monthly. Readings tell you if it needs to be more often.
What should I send you?
The site address, the type of premises and your opening hours, along with a few photos and any previous report.
What ductwork cleaning looks like in Mill Lane
Fire safety in Mill Lane falls to Surrey Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract. In Mill Lane, food businesses are inspected by environmental health officers from Hart council. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. Our report lists what was cleaned and when, which is useful to have ready.
A hospital like Fleet Community Hospital, about 2.9 miles north, is the kind of site where a kitchen may cook for patients, staff and visitors all day. If you look after a school kitchen, at a school such as St Nicholas' School or anywhere near Mill Lane, the holidays are the usual time for a TR19® clean. Where a hall near Old Church of All Saints, or anywhere in Mill Lane, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
Mill Lane is about 2 miles south-west of Fleet, in Surrey. Whatever kind of site you run in Mill Lane, we can take on ductwork cleaning. Visits can be booked for evenings, overnight or weekends so trading isn’t interrupted. Our Surrey coverage runs to 395 places, and Mill Lane is one of them. We also work in Guildford, around 13 miles away.
Every address in GU10 is covered for ductwork cleaning, from the main roads to the quietest streets. Ductwork cleaning is available to premises on Bowenhurst Lane and Aquarius Close and the roads around them. We also cover Bowling Alley (1 mile south-east), Crondall (1 mile south), Redlands (1 mile south-east), Dogmersfield (1 mile north) and Crookham Village (2 miles north). Within a short drive, we also cover Guildford (13 miles east), Woking (14 miles east), Camberley (9 miles north-east), Farnham (4 miles south-east), Frimley (8 miles north-east) and Haslemere (13 miles south-east).
Landmarks near Mill Lane
Locally, jobs take us to businesses close to The Exchequer pub, Court Moor School and Basingbourne Park and the streets around them. For rail, the closest station is Winchfield station, roughly 3 miles north-west of the centre. Other landmarks nearby include Museum of Farnham (3.8 miles south-east) and Powderham Castle (2.4 miles south). For a walk, there’s Tundry Hill and Dogmersfield Lake.
Why act early in Mill Lane
Grease left in a duct in Mill Lane hardens over time. It bakes into a hard layer that takes far longer to remove, which makes each delayed clean a bigger one. It’s worth booking a check, because nobody sees inside a duct day to day.
No two sites are the same, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all make a difference.
Why book with us
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- In business since 2009
- One contact for all your sites in London and the South East
- Fully insured
For landlords and multi-site operators
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We’re happy to deal with either side and send the paperwork to whoever needs it.
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. With shared responsibility, good records help everyone.
In-house cleaning or a specialist?
In-house cleaning and specialist cleaning do different jobs. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. Leave those to us.
What we do, step by step
We turn up at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Equipment that has to be off is switched off and allowed to cool before any work starts, and floors and nearby surfaces are sheeted. On site, it takes a shift or more, depending on the length of the runs and the number of access points. The timing of a visit to Mill Lane is set by you, and the travel is our side of the planning.
- Diagnosis: a survey of the duct’s route, size and access.
- A fixed quote follows, based on what we found.
- Each section is cleaned in turn through its access panel.
- We take extra care at bends and at the foot of risers.
- Readings, pictures and a recommended next clean date complete the job.
Getting ready for the visit
- Tell us where we can park and unload
- Let us know about permits to work or site inductions
- Plan for cooking equipment or plant to be off before we arrive
Getting a quote
For a fixed quote, call 0345 646 2711 or drop us a line and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. You will usually have a quote within one working day.
Related advice
What affects the quote in Mill Lane
The survey tells us what the work involves. The main factors are:
- The condition of the system
- A single visit or a regular plan
- Working hours and out-of-hours timing
- How easy every part is to reach
Putting the work off seldom saves money. Build-up, wear and faults tend to get worse, not better, which can make the next visit longer. If you are not sure what’s needed, phone us on 0345 646 2711 or use the quote form and we will give you an honest view and a fixed quote.
What to send for a quote
You don’t need the technical terms. Just send:
- Wide pictures of the system and the area around it
- When the site is open and when it’s quiet
- Any access panels or hatches you can see
- Where the plant sits or the system leaves the building, such as a roof or outside wall
To help us quote: where the site is, what it is and its opening hours, pictures of the system and any previous report or certificate. Then call us on 0345 646 2711 or email us.
When it’s something else
Not every problem is solved by ductwork cleaning, and we will tell you before we start. It doesn’t solve:
- Parts of the duct with no way in
- Leaking duct joints that need repair
- A failed fan motor at the end of the duct (a fan repair job)
If you’re not sure, just ring 0345 646 2711 or email us and we’ll give you a straight answer before you book.
Parts of the system we cover
- Horizontal duct runs
- Vertical risers
- Attenuators
- Bends and junctions
- Access panels
- Multi-storey ducts
Looking after it afterwards
To keep the system working properly between visits:
- Never cook with a filter missing
- Do not switch the extract off early
- Keep your cleaning records together
- Leave a way through to the access panels
File the paperwork in the maintenance log. It’s the evidence an insurer or inspector may ask for, and the photos make the duct’s condition easy to see.
Grease that never reaches the duct never needs cleaning out of it. Clean, properly seated filters are the duct’s best protection.