Hampshire · Ductwork cleaning
Ductwork Cleaning in Milford on Sea
Ductwork cleaning for Milford on Sea and the surrounding area: diagnosis first, then a fixed quote, the work and a report with photos. Call for a fixed quote.
- Fat dripping from the ductwork
- Heavy grease at the base of a riser
- Readings above 200 microns from a grease thickness test
Ductwork cleaning for kitchens and businesses in Milford on Sea
Duct cleaning is the hardest part of an extract clean, and the part most often skipped. Sections with no way in can go uncleaned for years. We open up every reachable section and record any we cannot reach, so you know exactly where you stand. The work covers attenuators, vertical risers and horizontal duct runs, and the jobs we see most are duct runs that can’t be reached and grease leaking from duct joints.
Kitchens around a place like Milford on Sea are often in older buildings or single-storey extensions, with the duct running through a roof space or up an outside wall. Flat runs collect grease and need proper access to clean.
For insurers and inspectors, the record counts. That is why every job is written up in a report with pictures, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Where
- Milford on Sea (SO41)
- Region
- Hampshire
- Paperwork
- Certificate and photo report
- Price
- A fixed quote up front
- When we work
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Checked
- 30 October 2026
When to call us in Milford on Sea
Grease settles fastest where the air slows down. Flat runs, bends, reducers and the base of risers are the usual hotspots, and those are the points we pay most attention to.
If you notice any of these, it’s worth a diagnosis:
- Duct runs with no cleaning record
- Smells of old cooking grease from the ductwork
- A duct clean needed for an insurer
- Grease seeping out of the duct seams
Church and community hall kitchens, near Church of All Saints or anywhere around Milford on Sea, are easy to forget, but their extracts collect grease like any other.
Questions to ask before booking
- Whether the quote shows VAT
- What happens if part of the system cannot be accessed
- If they look at the system before pricing
- Whether the price is fixed
Grease, kitchens and Milford on Sea
Milford on Sea is within about 1 mile of the coast. Salt in the air is hard on rooftop fans, discharge cowls and fixings, so we check them for corrosion as well as grease. The FSA’s data shows about 5 pubs and bars registered within 1.5 miles or so of the middle of Milford on Sea. Wherever they cook, the canopy, duct and fan collect grease just as a restaurant’s do. The fire and rescue service for Milford on Sea is Hampshire and Isle of Wight Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises.
School kitchens, at schools like Milford-on-Sea Church of England Primary School for example, are usually cleaned in the holidays so no lunches are lost. Healthcare kitchens, like those at hospitals such as Lymington New Forest Hospital (about 3.6 miles north-east), often cook for long hours, which puts them in BESA’s heavier-use bands.
Milford on Sea is about 3 miles south-west of Lymington, in Hampshire. For ductwork cleaning in and around Milford on Sea, it’s easy to get a fixed quote: please ring 0345 646 2711, or email photos. Our area covers London and the South East, including Milford on Sea. Milford on Sea is one of 683 places in Hampshire we cover for commercial clients. For sites nearby, see our Southampton page, about 16 miles away.
We work across the SO41 postcode area for ductwork cleaning and the streets around it. Streets in the area include High Street, Love Lane and Greenbanks Close, and we cover them all for ductwork cleaning. We also cover the places around Milford on Sea: Lymore (1 mile north-east), Keyhaven (1 mile east), Everton (1 mile north), Lower Pennington (2 miles north-east) and Pennington (2 miles north-east). Larger places within reach include Totton (14 miles north), Hythe (13 miles north-east), New Milton (4 miles north-west), Ringwood (12 miles north-west), Barton on Sea (3 miles west) and Dibden Purlieu (12 miles north-east).
Local landmarks in Milford on Sea
Typical jobs here are in premises near The Red Lion Public House and Priestlands School, among other places. For rail, the closest station is Lymington Town station, roughly 3.4 miles north-east of the centre. Well-known places in the area include Yarmouth Castle (4.3 miles east) and Lymington New Forest Hospital (3.6 miles north-east). The countryside around Milford on Sea includes Milford on Sea LNR and Tennyson Down.
Your questions about ductwork cleaning in Milford on Sea
Do you cover smaller places like Milford on Sea?
Yes, we work in villages as well as towns, and Milford on Sea is covered. Let us know about access, parking and anything unusual about getting there when you book.
Can the work in Milford on Sea be done at night or at weekends?
Yes, we can come after you close and finish before you open. The site is handed back ready to open. Your opening times are the first thing we ask for.
What do you do with what you remove?
It leaves the site with us when we go. While we work, it’s kept contained so the area stays clean.
Is TR19 cleaning required by law?
No. TR19® is BESA’s specification, not legislation. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
Which sectors do you work in?
Any site with a kitchen or a ventilation system to look after, from a small pub to a hospital. Hotels, schools, care homes, offices, shops and leisure sites are all part of our work.
Do we lose a day’s trading?
Not typically. We work when the area is out of use, such as evenings, overnight, early mornings or weekends, so the site can carry on as normal.
How long will the duct clean take?
Duct length, access and grease levels all affect it. Typically it takes a few hours for a short run, longer for long runs and tall risers.
Do you have a 24/7 line?
Yes. There’s a 24/7 emergency line for anything that can’t wait until a planned visit. Ring any time and tell us what’s happened.
In-house cleaning or a specialist?
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, which is where we come in.
In-house cleaning and specialist cleaning do different jobs. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but they don’t reach the grease that builds up further in. That part needs specialist access and equipment.
What happens on the day
The first job on site is protection: sheeting goes over floors and surfaces close to the work. After that, the system is made safe and the work begins. The work on site takes a few hours for a short run, longer for long runs and tall risers, and the area is cleaned down before we leave. Getting to the system matters more than parking in a place like Milford on Sea, so let us know how to reach it.
- We start by working out how the duct runs and where it can be opened.
- Grease readings are taken at set points along the duct.
- Access panels are opened and heavy deposits scraped out by hand.
- Horizontal runs and risers are then degreased by the method that suits the deposit.
- We test again, take pictures and note any part that couldn’t be reached.
Before we arrive
- Mention any parking or loading restrictions
- Clear the space around the work
- Tell us the best time to work, such as after service or at a weekend
Ask for a quote
There’s no standard price list, because no two systems are the same. We look at your system first, from pictures or on a visit, then send a fixed quote. To get going, ring 0345 646 2711 or send us an email.
Related advice
Fixed quotes for ductwork cleaning in Milford on Sea
Some jobs are bigger than they look, and some smaller. The main factors:
- Whether it’s a one-off visit or part of a schedule
- The condition of the system
- When the work can happen, such as evenings, overnight or weekends
- Whether we need access equipment or extra panels
No two sites are the same, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all make a difference.
What we need to know
You don’t need the technical terms. Just send:
- Problems your staff have spotted
- Any previous report or certificate
- When the site is open and when it’s quiet
- The roof, plant room or outside wall the system runs to
Want a quote for ductwork cleaning? Please call us on 0345 646 2711, or send details by email and tell us about the site. We’ll explain what we’d do and send a fixed quote before you commit to anything.
Also near Milford on Sea
Other services in Milford on Sea
Aftercare tips
After the visit, a few habits help the work last:
- Report any grease dripping from duct joints
- Store the certificate with the fire risk assessment
- Don’t switch the extract off early
- Leave a way through to the access panels
Every panel we open is refitted when we finish, and the surrounding area is left clean. Grease and dirty water are contained and removed.
Grease that never reaches the duct never needs cleaning out of it. Clean, properly seated filters are the duct’s best protection.
Why it’s worth doing now in Milford on Sea
Booking the duct clean in Milford on Sea now keeps it a planned job. The work takes anything from a few hours to several visits, depending on the length of duct, done out of hours so the kitchen keeps cooking. Booking now means the visit to Milford on Sea is planned around you, not forced by a breakdown.
One small site or a whole estate, the quote is built the same way: what needs doing, how we get to it and when. The price is fixed before work begins.
What you get with us
- Photo reports with every job
- Evenings, overnight and weekends, plus 24/7 emergency callout
- CHAS and SafeContractor accredited, with ISO 9001
- In business since 2009
Read our cost guide or our accreditations.
Different parts, different methods
Multi-storey and shared buildings
A fire in a duct in a shared building can affect far more than one kitchen, which makes keeping it clean all the more important. Your certificate and report give building managers the record they need.
Attenuators and discharge
Attenuators, where fitted, quieten the extract, and their linings can soak up grease. They’re cleaned where possible and recorded if not.