Hampshire · Ductwork cleaning
Lymore ductwork cleaning
Need ductwork cleaning in Lymore? We survey first, send you a fixed quote and work around your opening hours, then sign off with a report and photos.
- Ductwork that has never been cleaned
- Heavy grease at the base of a riser
- Years of grease along the duct floor
Ductwork cleaning for kitchens and businesses in Lymore
Once air leaves the canopy, it travels through ductwork that most people never see. Grease settles along every metre of it and a fire in the duct can spread through the building. We clean it from the inside, through access panels, to BESA TR19® Grease. The work covers attenuators, vertical risers and access panels, and people most often call us about sections of duct with no access panels and an insurer asking for TR19 evidence.
Somewhere as small as Lymore, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Every one of them still needs its extract kept clear of grease.
The paperwork matters as much as the work. You get a written report with pictures after each visit, listing what was done, anything we couldn’t reach and when the next visit is due. File it in your maintenance log so it’s ready for an insurer, fire officer or EHO.
- Place
- Lymore (SO41)
- Wider area
- Hampshire
- Paperwork
- TR19® certificate and photo report
- Price
- Fixed quote, typically within a working day
- When we work
- Evenings, overnight and weekends; 24/7 emergencies
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
Your questions about ductwork cleaning in Lymore
Who carries out food hygiene inspections in Lymore?
Kitchens in Lymore are inspected by New Forest council’s environmental health officers. It helps to keep the extract cleaning records with your food safety paperwork, so they’re ready if asked for.
Does coastal air change anything about ductwork cleaning in Lymore?
It can, as Lymore is within about 1 mile of the sea, where salt in the air is hard on metal. We look at fans, cowls and fixings for rust as well as grease.
How far ahead should we book?
Earlier is better, especially for out-of-hours work. We typically quote within one working day, and there’s a 24/7 line for emergencies.
What’s the cleaning interval for extract ductwork?
The duct is cleaned as part of the whole system, at intervals set by BESA guidance, from every 3 months for heavy use to every 12 months for light use. Grease thickness testing shows whether that is often enough.
Can extra access doors be added to the duct?
Yes, we fit access panels where the duct needs them. That lets the next clean reach sections that were missed, and the report will show where they’re needed.
Do you cover Lymore?
Yes. Our area takes in London and the counties of South East England, Lymore included.
Do I get a certificate for ductwork cleaning?
A photo report, with readings and before and after photos, plus a TR19 certificate for a full system clean. The report says when the next clean is due.
Can we book visits on a schedule?
Yes. Tell us what you have and how it’s used, and we’ll suggest a schedule and quote for it.
Grease, kitchens and Lymore
Lymore lies within about 1 mile of the sea. Metal on the roof weathers faster close to the coast, and the extract fan and cowl are no exception. Look up Lymore on the FSA’s food hygiene register and you will find about 18 restaurants, cafés and canteens and about 6 takeaways across Lymore and its immediate surroundings (about a mile and a half). The duct above a busy canopy coats itself in grease long before anyone sees it. Fire safety in Lymore falls to Hampshire and Isle of Wight Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
Church and community hall kitchens, near Church of All Saints or anywhere around Lymore, are easy to forget, but their extracts collect grease like any other. Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; Lymington New Forest Hospital is the nearest hospital to Lymore, about 2.9 miles north-east.
Lymore is about 2 miles south-west of Lymington, in Hampshire. We provide ductwork cleaning for commercial premises of every kind in Lymore and the rest of Hampshire. Across Hampshire, we cover 683 places, Lymore among them. For sites nearby, see our Southampton page, about 15 miles away.
Work in SO41 follows the same survey, fixed quote and written report as everywhere else we cover. Streets in the area include Lymore Valley, Lymore Lane and School Lane, and we cover them all for ductwork cleaning. We also cover Everton (1 mile north), Milford on Sea (1 mile south-west), Keyhaven (1 mile south-east), Lower Pennington (1 mile east) and Pennington (2 miles north-east). Further out, we also cover Totton (13 miles north), Hythe (12 miles north-east), New Milton (4 miles west), Ringwood (12 miles north-west), Warsash (15 miles north-east) and Barton on Sea (4 miles west).
What’s near Lymore
In Lymore, that means kitchens and buildings near Priestlands School and The Crown Public House, among other places. The closest station to Lymore is Lymington Town station, roughly 2.7 miles north-east of the centre. Other landmarks nearby include Lymington New Forest Hospital (2.9 miles north-east) and St Barbe Museum and Art Gallery (2.4 miles north-east). The countryside around Lymore includes Milford on Sea LNR.
Fixed quotes for ductwork cleaning in Lymore
Some jobs are bigger than they look, and some smaller. The main factors:
- Access, including roofs, risers and ceiling voids
- The number of sites or systems
- Where the site is and how we reach it
- Whether it’s a one-off visit or part of a schedule
What you pay depends on how big the system is, what state it’s in and access to every part of it. We give you a fixed price before we start, so you know where you stand.
Asking for a quote
Before you ask for a quote, gather:
- How we’d reach plant on a roof or in a plant room
- Photos showing the whole system and its surroundings
- The paperwork from the last visit, if you have it
- Close-ups of filters, grilles, hatches or access panels
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and many jobs can be priced from that alone.
Nearby places to Lymore
Also in Lymore
What happens on the day
We start by comparing what we find with the survey or your pictures. Anything unexpected is raised with you before we go further. After that, the work takes a shift or more, depending on the length of the runs and the number of access points. We agree a date with you, plan the drive to Lymore and turn up when the site is quiet.
- First the duct route is traced and every access point noted.
- Set points along the runs are tested for grease.
- We open the panels and scrape out the heaviest grease.
- The duct is degreased with the method that suits the grease, from degreasers to hot water or steam.
- Post-clean readings and photos go into the report, with any unreachable section listed.
Preparing for the visit
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Mention any parking or loading restrictions
- Plan for cooking equipment or plant to be off before we arrive
How to get a quote
For ductwork cleaning in Lymore, call us on 0345 646 2711, or send details by email. Tell us what kind of premises it is and when it’s open, plus photos or the previous report if they’re to hand. A fixed quote usually follows within one working day.
Related advice
When something else is needed
We will always give you a straight diagnosis, so here’s what this work cannot put right:
- A duct that’s too small or badly routed for the kitchen (a design issue)
- A failed fan motor at the end of the duct (a fan repair job)
- Leaking duct joints that need repair
Not sure which it is? You can ring 0345 646 2711, or send details by email and we will tell you honestly before you book.
Parts of the system we cover
- Multi-storey ducts
- Horizontal duct runs
- Bends and junctions
- Vertical risers
- Attenuators
- Access panels
Between visits
Good habits slow the build-up between visits. A few tips:
- Have the grease measured if cooking hours go up
- Leave a way through to the access panels
- Report any grease dripping from duct joints
- Consider fitting panels where the report shows gaps
Any section of duct we couldn’t reach is listed on the report and why. We can fit access panels so those sections are cleaned next time.
Book the next duct clean before the date passes. A change in cooking hours may change the interval under BESA guidance, and grease thickness testing will show it.
In-house cleaning or a specialist?
Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, alongside our reports.
Staff cleaning doesn’t replace a specialist visit; it supports it. Regular in-house cleaning slows the build-up, but the parts you can’t see still need a specialist at the right interval.
Why deal with it now?
BESA guidance says grease shouldn’t exceed a mean of 200 microns between cleans. A reading of 500 microns or more at any point means a spot clean straight away. Putting off the clean only pushes readings higher. A planned visit to Lymore is easier to arrange than an emergency callout.
Kitchens, offices, schools and hospitals are all priced the same way: the size of the job, access, condition and working hours. Call for a fixed quote and we’ll explain each part.
Why Lymore businesses choose us
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Trading since 2009
- Survey first, then a fixed quote
- Accredited under CHAS and SafeContractor, with ISO 9001
Take a look at how cleaning jobs are priced or how to check a contractor.
Signs you need ductwork cleaning in Lymore
A duct with too few access doors cannot be fully cleaned. Sections between panels go uncleaned, sometimes since the system was installed, and grease there keeps thickening unseen.
These are the problems we see most often:
- Duct runs that cannot be reached
- Thick deposits at the bottom of a vertical duct
- High readings at a recent grease test
- Grease leaking from duct joints
If you look after a school kitchen, at a school such as Milford-on-Sea Church of England Primary School or anywhere near Lymore, the holidays are the usual time for a TR19® clean.
Before booking anyone
- Whether VAT is included
- If they look at the system before pricing
- How they set the interval to the next visit
- Which accreditations they hold, and whether you can check them