Hertfordshire · Ductwork cleaning
Ductwork cleaning in Markyate, Hertfordshire
Ductwork cleaning for businesses, landlords and public buildings in Markyate. CHAS, SafeContractor and ISO 9001, and fully insured.
- A duct clean needed for an insurer
- Readings above 200 microns from a grease thickness test
- Smells of old cooking grease from the ductwork
Ductwork cleaning in Markyate: the local picture
Food Standards Agency records list about 3 restaurants, cafés and works canteens and about 3 takeaways within about 1.5 miles of central Markyate. Behind every canopy among them is a run of ductwork that collects grease out of sight. Markyate sits within the area of Hertfordshire Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk. Kitchens in Markyate get their food hygiene inspections from Dacorum council. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. Keeping each certificate and photo report on file helps show the extract is looked after.
Healthcare kitchens, like those at hospitals such as Luton and Dunstable Hospital (about 4.1 miles north), often cook for long hours, which puts them in BESA’s heavier-use bands. Where a hall near Markyate Methodist Church, or anywhere in Markyate, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
Markyate is in Hertfordshire. For ductwork cleaning in and around Markyate, please phone us on 0345 646 2711, or email photos for a fixed quote. Our area covers London and the South East, including Markyate. Our Hertfordshire coverage runs to 381 places, Markyate among them. We also work in Milton Keynes, around 19 miles away.
Our technicians cover all of AL3 for ductwork cleaning and the roads nearby. Streets in the area include High Street, London Road and Sebright Road, all of which we cover for ductwork cleaning. Other places close to Markyate include Roe End (1 mile south-west), Flamstead (2 miles south-east), Friar's Wash (2 miles south-east) and Trowley Bottom (2 miles south-east). Within a short drive, we also cover Watford (12 miles south), Hemel Hempstead (6 miles south), Stevenage (13 miles north-east), St Albans (8 miles south-east), Welwyn Garden City (12 miles east) and Harpenden (5 miles east).
What’s near Markyate
Around Markyate, our work takes us to kitchens and buildings near The Local pub and the streets around them. The closest station to Markyate is Luton Airport Parkway station, roughly 3.8 miles north-east. Other landmarks nearby include Mossman Collection (2.6 miles north-east) and Luton Castle (3.3 miles north-east). For a walk, there’s Landpark Wood.
Ductwork cleaning in Markyate
Nobody sees duct grease building, so nobody notices it until something goes wrong. Flames pulled in from the cooking line can ignite it, carrying a fire along the duct and into rooms far from the kitchen. Cleaning the duct takes that fuel away. Typical jobs include high readings at a recent grease test and an insurer asking for TR19 evidence, across multi-storey ducts, vertical risers and attenuators.
For a smaller kitchen near Markyate, a TR19® clean is the same job as anywhere: canopy, filters, plenum, duct, fan and discharge. The visit is booked around your opening hours, and the journey is planned ahead.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we are fully insured. On top of that, we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.
- Location
- Markyate (AL3)
- Region
- Hertfordshire
- Records
- Certificate plus before-and-after photos
- Quotes
- Fixed quote, usually within a working day
- Working hours
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Checked
- 30 October 2026
What affects the cost of ductwork cleaning
The price is fixed before any work begins. It takes into account:
- One-off work versus a regular cycle
- Any permits to work or inductions
- Access, including roofs, risers and ceiling voids
- What state the system is in
A single site or a whole portfolio, we price it on the same basis: what needs doing, how we get to it and when. The price is fixed before we start.
Helping us quote
Photos and a few facts are often enough to price the work. Send what you can of the following:
- Detail shots of panels, filters and grilles
- Your last certificate, test record or report
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Any symptoms, from odd noises to smells or leaks
Need a price for ductwork cleaning? Please call 0345 646 2711 or drop us a line with a few details about the site. We will explain what we’d do and send a fixed quote before you commit to anything.
When it’s something else
We’ll always give you a straight diagnosis, so here’s what ductwork cleaning won’t do:
- A damper stuck open in the duct
- Duct sealed behind fixed ceilings or walls
- An extract fan that has stopped working
If you’re not sure, just call 0345 646 2711, or email photos and we’ll give you a straight answer before booking.
Where we work
- Multi-storey ducts
- Horizontal duct runs
- Attenuators
- Bends and junctions
- Vertical risers
- Access panels
What happens if it’s left?
Grease narrows the duct and slows the air. Less air moves, so heat and smoke stay in the kitchen while the fan strains, and grease may start to leak from joints. A planned visit to Markyate fits your hours; an emergency does not.
No two sites are the same, so we price each one individually. Size, access, the condition of the system and when we can work all make a difference.
What you get with us
- Every job surveyed first
- Fully insured
- Fixed quotes from a survey or photos
- Photo reports with every job
See what affects the cost and our accreditations.
Different parts, different methods
Attenuators and discharge
Some systems have attenuators to reduce noise, and their linings can soak up grease. We clean what can be reached and note anything that cannot.
Access panels
Access panels are the doors that let us into the duct. Without them, parts of the duct can’t be reached, and TR19 expects them to be recorded.
What we do, step by step
The first job on site is protection: sheeting goes over floors and surfaces close to the work. After that, the system is made safe and the work begins. The work on site takes anything from a few hours to several visits, depending on the length of duct, and the area is cleaned down before we leave. In a place like Markyate, we fit the visit around your hours.
- We start by working out how the duct runs and where it can be opened.
- We measure grease thickness at set points before cleaning.
- We open the panels and scrape out the heaviest grease.
- Next the ducts and risers are degreased, using whatever suits the deposit.
- Readings and pictures are repeated and any section we couldn’t reach is recorded.
Getting ready for the visit
- Mention any sign-in, permit or induction we need
- Let us know when the site is closed or quiet
- Arrange a key holder or contact on site
Ask for a quote
Getting a quote doesn’t take long. Send a few details and photos, and we usually reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.
Read more
Do you need ductwork cleaning in Markyate?
Grease filters that do not seal let fat straight through. The duct then takes grease that the filters should have stopped and it fills faster.
Most sites get in touch after spotting one of these:
- An insurer asking for TR19 evidence
- A rancid smell from the extract duct
- Duct runs with no cleaning record
- Grease seeping out of the duct seams
For schools such as Markyate Village School and Nursery, kitchen extract cleaning is normally booked for the holidays, when the canteen is closed.
Before booking anyone
- Whether the price is fixed
- Whether they’re fully insured
- Whether VAT is included
- Proof of accreditation you can verify
Nearby places to Markyate
What else we do in Markyate
For landlords and multi-site operators
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. Where responsibility is shared, records matter even more.
Facilities teams in offices, schools and healthcare sites book us too in Markyate and across Hertfordshire. Work can be phased by floor, building or site around the people who use them.
Markyate questions
Can you come to Markyate after we close?
Yes. We work evenings, overnight and at weekends. It means the site in Markyate keeps running as normal. Just call 0345 646 2711 or email us with your opening times and we’ll plan around them.
Which fire service covers Markyate?
That’s Hertfordshire Fire and Rescue Service. TR19® isn’t law, but it’s the benchmark many fire officers and insurers look to when they ask how often the extract is cleaned.
Can you come out in an emergency?
Yes, any time. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line and we’ll talk you through the next steps.
How do you keep the site clean during the work?
We start with protection: sheeting over floors, worktops and anything close to the work. We tidy up and take our waste away before we leave.
How can I tell if my extract ducts are dirty?
The date on the last certificate is the first thing to check. If it’s overdue, or there is not one, a clean is due, and grease readings will confirm how urgent it is.
What is TR19?
A BESA specification in two main parts: TR19® Grease for kitchen extracts and TR19® Air for supply and extract systems. It is not law, but it’s the benchmark.
Where does the waste go?
It leaves the site with us at the end of the visit. During the work, it’s contained to keep the area clean.
Do you offer maintenance contracts?
Yes. Send details of the systems and how they’re used, and we’ll suggest a schedule and quote for it.