Hampshire · Ductwork cleaning
Duct cleaning in Hillstreet
Our technicians work in Hillstreet on cleaning of kitchen extract ductwork, horizontal runs and vertical risers through access panels. Fixed quotes, work around your opening hours and photo reports as standard.
- Smells of old cooking grease from the ductwork
- Thick deposits at the bottom of a vertical duct
- A duct clean needed for an insurer
Looking after it afterwards
After the visit, a few habits help the work last:
- Keep the fan on while anything is cooking
- File each certificate and photo report in the maintenance log
- Keep grease filters clean and fitted whenever you cook
- Tell us if grease leaks from the ductwork
File the paperwork in the maintenance log. An insurer, fire officer or EHO may ask to see it, and the pictures make the duct’s condition easy to see.
Watch for warning signs between cleans: drips from the ductwork, stale smells or a noisy fan. A grease thickness test can confirm whether a spot clean is needed.
About our ductwork cleaning in Hillstreet
Once air leaves the canopy, it travels through ductwork that most people never see. Every horizontal run and vertical riser collects grease along the way, and that’s where a kitchen fire can travel. We clean it from the inside, through access panels, to BESA TR19® Grease. If you have grease leaking from duct joints and readings above 200 microns from a grease thickness test, we can help.
In a village or hamlet like Hillstreet, the kitchens that need extract cleaning are typically a pub, a school, a care home or a hall kitchen, wherever there is one. Every one of them still needs its extract kept clear of grease, whatever the size of the place.
Each visit ends with a written report and photos, so there’s a dated record of the work. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Place
- Hillstreet (SO40)
- Region
- Hampshire
- Paperwork
- Certificate and photo report
- Price
- A fixed price before work begins
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
Fixed quotes for ductwork cleaning in Hillstreet
We don’t publish a price list, because sites vary so much. What we look at:
- How many systems or sites are involved
- The times the site is available
- Whether we need access equipment or extra panels
- A single visit or a regular plan
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we will go through it with you.
Helping us quote
To speed up the quote, please include:
- A few general shots of the system
- Problems your staff have spotted
- When the site is open and when it’s quiet
- Close-ups of filters, grilles, hatches or access panels
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
What a clean will not put right
Before booking, it helps to know what’s not included:
- Fire dampers that don’t close (they need testing and remedials)
- Leaking duct joints that need repair
- A duct that is too small or badly routed for the kitchen (a design issue)
If in doubt, call us on 0345 646 2711 or use the quote form and we will say what we think.
Parts of the system we cover
- Vertical risers
- Access panels
- Multi-storey ducts
- Horizontal duct runs
- Attenuators
- Bends and junctions
What we are called out for in Hillstreet
Risers carry the extract up through the building. Grease clings to the walls and can run down to the base, where it can pool. Access along its height is needed to clean it properly.
Signs it’s time to call us include:
- Hardened, baked-on grease in long horizontal runs
- A duct clean needed for an insurer
- A rancid smell from the extract duct
- Thick deposits at the bottom of a vertical duct
A hall kitchen that only cooks for events, whether near St Anne's or elsewhere in Hillstreet, still needs its extract cleaned, just less often.
Comparing quotes
- Whether the price is fixed
- Whether the work can be done while the site is closed
- How areas they cannot reach will be recorded
- What insurance they carry
The process
Our technicians bring everything the work needs, including protection sheets, the right tools and access kit. All we need from you is clear access and the right equipment switched off. On site, the work takes a few hours for a short run, longer for long runs and tall risers. Pictures of the system and its access let us plan the work in Hillstreet before we set off.
- We map the duct route and check where the access panels are.
- Set points along the runs are tested for grease.
- Through the access panels, thick grease is removed by hand first.
- Next the ducts and risers are degreased, using whatever suits the deposit.
- Readings and photos are repeated and any section we couldn’t reach is recorded.
How to prepare
- Arrange a key holder or contact on site
- Tell us the best time to work, such as after service or at a weekend
- Mention any locked doors, roof access or ceiling voids
Getting a quote
To get a fixed quote, call us on 0345 646 2711 or use the quote form with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. We typically come back within one working day.
Advice
Nearby places to Hillstreet
What else we do in Hillstreet
Why it’s worth doing now in Hillstreet
TR19® isn’t law, but the duty to manage fire risk is. The Fire Safety Order 2005 makes the responsible person assess and reduce fire risk, including the grease inside the extract ductwork. In a small place like Hillstreet, a system that fails can take a site out of use.
No two sites are the same, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all make a difference.
What you get with us
- Out-of-hours work and a 24/7 emergency line
- In business since 2009
- Fixed quotes from a survey or photos
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
See our cost guide or our accreditations.
What staff can safely do
For ventilation and air handling systems, in-house care is mostly about checks: clear grilles, a log of filter changes and reporting anything odd. Cleaning inside ducts and units is specialist work.
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but the parts you can’t see still need a specialist at the right interval.
Hillstreet kitchens: local notes
Hillstreet is within about 3 miles of the coast. Metal on the roof weathers faster close to the coast, and the extract fan and cowl are no exception. Food Standards Agency data counts about 7 restaurants, cafés and works canteens within about 1.5 miles of central Hillstreet. The duct above a busy canopy coats itself in grease long before anyone sees it. Hampshire and Isle of Wight Fire and Rescue Service covers Hillstreet. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
Healthcare kitchens can’t easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Hillstreet is Tatchbury Mount Hospital, about 1.1 miles south-west. If you look after a school kitchen, at a school such as Calmore Junior School or anywhere near Hillstreet, the holidays are the usual time for a TR19® clean.
Hillstreet is about 2 miles north of Totton, in Hampshire. Whether your site is in the middle of Hillstreet or further out, ductwork cleaning is available to all kinds of commercial premises, from a single unit to a large public building. Our area takes in 683 places across Hampshire, large and small. Our Southampton page covers sites nearby, about 6 miles away.
Postcode districts we cover here for ductwork cleaning: SO40. If your site is just outside Hillstreet, we cover Ower (1 mile west), Wigley (1 mile north-west), Totton (2 miles south), Winsor (2 miles south-west) and Netley Marsh (2 miles south). We also work in nearby towns such as Winchester (12 miles north-east), Eastleigh (8 miles east), Fareham (15 miles south-east), Chandler's Ford (6 miles north-east), Hedge End (9 miles east) and Lymington (13 miles south).
Local landmarks in Hillstreet
For rail, the closest station is Totton station, about 2.3 miles south-east of the centre. Nearby you will also find Tatchbury Mount Hospital (1.1 miles south-west) and Eling Experience (2 miles south-east). Not far away are Testwood Lakes.
Common questions in Hillstreet
Does being near the coast affect ductwork cleaning in Hillstreet?
It can. Being within about 3 miles of the sea means more corrosion on metalwork in Hillstreet than inland. A fan housing that is rusting near the coast can fail sooner, so it’s worth catching early.
Can you clean school kitchen extracts in Hillstreet during the holidays?
Yes, out-of-term visits are normal for schools. Around Hillstreet, the Food Standards Agency lists about 4 schools and colleges with registered kitchens within a mile and a half or so. Just phone us on 0345 646 2711, or send details by email with your term dates and we’ll plan around them.
Which kinds of sites do you work on?
All kinds of commercial and public premises: kitchens, offices, schools, healthcare, retail, leisure and food production. We fit the work around how the site operates.
Are you fully insured?
Yes. We’re fully insured, and we can share the details when you need them.
How long will the duct clean take?
Short runs are quick, but long or complex ducts may take several visits. We plan the work around your kitchen.
What shows that the ducts need a clean?
Drips, smells and weak extraction are clues, but measuring is the reliable way to know. Grease thickness testing shows exactly where the duct stands.
What happens if you can’t reach some of it?
They’re marked on the report. Often the fix is extra access, such as new panels in ductwork, and we can fit those.
What’s involved in cleaning extract ducts?
Each section is cleaned through its own panel. Heavy grease comes out by hand, and what’s left is degreased, with readings taken before and after.