Isle of Wight · Ductwork cleaning
Duct cleaning in Chillerton
Our technicians work in Chillerton on ductwork cleaning. Out-of-hours visits, a fixed quote and a written report with photos as standard.
- Thick deposits at the bottom of a vertical duct
- Proof of duct cleaning for the insurer
- Hardened, baked-on grease in long horizontal runs
How we handle ductwork cleaning in Chillerton
In doctor’s terms, the ductwork is the system’s arteries: find the blockages, clear them, then check the flow is right. Readings taken before and after show the difference, alongside before and after photos. If you have heavy grease at the base of a riser and gaps where access panels were never fitted, we can put it right, from bends and junctions, horizontal duct runs and access panels onwards.
Work in a small place like Chillerton starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy to discharge, then a TR19® certificate and a photo report.
Each visit ends with a written report and photos, so there’s a dated record of the work. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Where
- Chillerton (PO30)
- Region
- Isle of Wight
- Records
- Certificate plus before-and-after photos
- Quotes
- A fixed quote up front
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
Chillerton questions
Do you cover smaller places like Chillerton?
Yes, Chillerton is part of our area, however small the site. The journey is planned ahead, so a few details about the route help.
Can the work in Chillerton be done at night or at weekends?
Yes, we can come after you close and finish before you open. Your customers, staff or residents in Chillerton needn’t be disturbed. When you call us on 0345 646 2711 or email us, mention when the site is quiet.
What if part of the duct cannot be reached?
We clean everything we can reach and record what we cannot. Extra panels can be installed, and we can do that for you.
Do you have a 24/7 line?
Yes, 24/7. Our office is open from 8am to 6pm on weekdays, and the emergency line covers the rest.
What shows that the ducts need a clean?
A grease thickness test gives the answer. Readings are taken by Wet Film Thickness Test (WFTT) or Deposit Thickness Test (DTT). BESA guidance says the mean shouldn’t exceed 200 microns, and 500 or more anywhere needs immediate spot cleaning.
Do I get a certificate for ductwork cleaning?
You get a photo report with before and after photos, plus a TR19 certificate when the whole system is cleaned. File them with the fire risk assessment.
What about areas you can’t get to?
They’re listed in the report, never skipped quietly. The report says which parts couldn’t be reached and why, and we can quote to improve the access.
Where does the waste go?
It leaves the site with us at the end of the visit. While we work, it’s kept contained to keep the area clean.
Keeping the system healthy
How long the results last depends on use and care. We suggest:
- Run the extract fan throughout service
- File each certificate and photo report in the maintenance log
- Ask us about extra access panels where sections cannot be reached
- Do not block access panels with shelving or stock
Every panel we open is refitted when we finish, and the surrounding area is left clean. Waste grease and water are taken away.
Extra access panels mean more of the duct gets cleaned each time. Grease you can reach is grease that gets removed.
When something else is needed
We will always give you a straight diagnosis, so here’s what this work can’t put right:
- An extract fan that has stopped working
- Duct sealed behind fixed ceilings or walls
- Duct sections that need replacing
If you are not sure, just give us a ring on 0345 646 2711 or use the quote form and we will give you a straight answer before you book.
What the work covers
- Vertical risers
- Horizontal duct runs
- Access panels
- Bends and junctions
- Multi-storey ducts
- Attenuators
What happens if it’s left?
TR19® isn’t law, but the duty to manage fire risk is. The Fire Safety Order 2005 makes the responsible person assess and reduce fire risk, and grease in the duct is part of that. It’s worth booking a check, because nobody sees inside a duct day to day.
Putting the work off seldom saves money. Problems in a system tend to grow, which can make the next visit longer. If you are unsure, give us a ring on 0345 646 2711 or send us an email for straight advice and a fixed quote.
Why Chillerton businesses choose us
- We diagnose before we treat
- Work around your opening hours, with 24/7 emergency cover
- A written report with pictures after each visit
- Accredited under CHAS and SafeContractor, with ISO 9001
Nearby places to Chillerton
Other services in Chillerton
Ductwork cleaning in Chillerton: the local picture
Food Standards Agency records include about 3 bars, pubs and nightclubs within roughly a mile and a half of the centre of Chillerton. Breakfasts, bar meals and functions all put grease into the extract wherever they’re cooked. Chillerton sits within the area of Hampshire and Isle of Wight Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract. It’s Isle of Wight council that sends environmental health officers to food businesses in Chillerton. Extraction counts as kitchen equipment, so its condition can come up on the day. Before-and-after pictures from each clean are a simple way to show the extract is in hand.
If you run catering at a historic house or estate in the area (Sheat Manor is about 0.6 miles north-east), event kitchens in older buildings often have awkward duct runs that need planning. School kitchens, at schools like Chillerton and Rookley Primary School for example, are typically cleaned in the holidays so no lunches are lost.
Chillerton is about 3 miles south of Newport, in the Isle of Wight. From the centre of Chillerton to the outskirts, we cover ductwork cleaning for every kind of premises, from a single unit to a large public building. We cover 125 places across the Isle of Wight, large and small. Our Portsmouth page covers sites nearby, about 15 miles away.
Every address in PO30 is covered for ductwork cleaning, from busy streets to back roads. Local streets include Hollow Lane, Greenland Close and Brook Lane, and we cover them all for ductwork cleaning. We also cover Gatcombe (1 mile north), Shorwell (2 miles west), Bowcombe (2 miles north-west), Plaish (2 miles north) and Chale Green (2 miles south). Larger places within reach include Newport (3 miles north), Ryde (8 miles north-east), Cowes (7 miles north), Sandown (7 miles east), Shanklin (6 miles east) and Ventnor (6 miles south-east). If your site is somewhere remote, a little more planning is needed, so let us know when you get in touch.
What’s near Chillerton
Other landmarks nearby include Whitecroft Hospital (1.5 miles north) and Carisbrooke Castle (2.5 miles north). For a walk, there’s Brighstone Down.
What your team can do, and what needs us
Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, next to our reports.
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. That is our job.
What we are called out for in Chillerton
A duct with too few access doors can’t be fully cleaned. Stretches with no way in may never have been touched, and grease there keeps thickening unseen.
These are the problems we see most often:
- Stale grease odours from the duct
- Sections of duct with no access panels
- Grease pooling at the foot of the riser
- Readings above 200 microns from a grease thickness test
If you run a church or community hall kitchen, near St. Olave's Church or elsewhere in Chillerton, its extract still collects grease from every lunch and event.
Comparing quotes
- What paperwork you get at the end
- When they can work, and whether that is outside your opening hours
- Exactly which parts of the system are covered
- If the quote is a fixed price or an estimate
Part by part
Access panels
Panels have to seal properly once they’re closed, so grease and air stay inside the duct. A damaged panel is noted on the report.
Vertical risers
In taller buildings, a riser may pass through several floors and fire compartments, so fire dampers may be fitted where it crosses them. We test those as a separate job.
The process
Protection comes first: sheeting goes over floors and surfaces close to the work. After that, the system is made safe and the work begins. It takes anything from a few hours to several visits, depending on the length of duct, and the area is cleaned down before we leave. Visits to a village like Chillerton are booked in advance, at a time that suits whoever runs the site.
- We map the duct route and check where the access panels are.
- We measure grease thickness at set points before cleaning.
- Access panels are opened and heavy deposits scraped out by hand.
- The duct is degreased with the method that suits the grease, from degreasers to hot water or steam.
- Post-clean readings and pictures go into the report, with any unreachable section listed.
Getting ready for the visit
- Tell us where we can park and unload
- Let us know how we reach the system, including roofs, risers and plant rooms
- Allow time for equipment near the work to be turned off and cool down
Get a fixed quote
To get a fixed quote, call us on 0345 646 2711 or send us an email with the site type, your trading hours and a short description of the system. A few photos and your last certificate or report help a lot. We normally come back within one working day.