Kent · Ductwork cleaning
Ductwork cleaning in Broad Oak, Kent
Ductwork cleaning for Broad Oak, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Smells of old cooking grease from the ductwork
- Duct runs with no cleaning record
- Fat dripping from the ductwork
What your team can do, and what needs us
If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We’ll take a look and send you a fixed quote.
In-house cleaning and specialist cleaning do different jobs. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
Ductwork cleaning in Broad Oak
We treat ductwork like a doctor treats arteries: find the blockages, clear them, then check the flow is right. Grease readings before and after give you the evidence, alongside before and after pictures. If you have duct runs that can’t be reached and fat dripping from the ductwork, we can help, from attenuators, vertical risers and bends and junctions onwards.
In a small place like Broad Oak, kitchens are often in older or extended buildings, with long single-storey duct runs, and those horizontal sections are where grease settles. We agree access and timings in advance.
Insurers, fire officers and environmental health officers all look at records. So every job comes with a written report and photos, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Location
- Broad Oak (CT2)
- Wider area
- Kent
- Paperwork
- Certificate plus before-and-after photos
- Quote
- A fixed price before any work starts
- Working hours
- Evenings, overnight and weekends; 24/7 emergencies
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
Aftercare tips
Here’s the after-treatment advice, short and simple:
- Get panels fitted where the duct couldn’t be cleaned
- Have the grease measured if cooking hours go up
- Leave a way through to the access panels
- File each certificate and photo report in the maintenance log
Any section of duct we couldn’t reach is listed on the report and why. You can then decide whether to have access panels fitted.
Watch for warning signs between cleans: drips from the ductwork, stale smells or a noisy fan. Testing will show whether any section has reached 500 microns.
When something else is needed
A few issues sit outside what this work can do:
- Parts of the duct with no way in
- Ductwork that was poorly designed
- Fire dampers that don’t close (they need testing and remedials)
If in doubt, call us on 0345 646 2711 or use the quote form and we’ll say what we think.
Where we work
- Horizontal duct runs
- Multi-storey ducts
- Bends and junctions
- Vertical risers
- Attenuators
- Access panels
Do you need ductwork cleaning in Broad Oak?
Grease in a duct running from a kitchen in Broad Oak is as much a fire risk as in any building. Burning grease can carry fire through the ductwork to other rooms or floors, which is why the responsible person needs it under control.
The symptoms we’re asked about most include:
- Readings above 200 microns from a grease thickness test
- Fat dripping from the ductwork
- A duct nobody has opened in years
- Smells of old cooking grease from the ductwork
Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; St Martins Hospital is the nearest hospital to Broad Oak, about 2.2 miles south.
Questions to ask before you book
- Whether the work can be done while the site is closed
- Whether a written report and photos are included
- Proof of insurance
- Whether the figure could change on the day
Kitchen extracts in Broad Oak
Food Standards Agency data counts about 14 restaurants, cafés and works canteens and about 9 sandwich bars and takeaways across Broad Oak and its immediate surroundings (about a mile and a half). Where they cook under a canopy, grease doesn’t stop at the filters: it settles along the duct and up the riser. The fire and rescue service for Broad Oak is Kent Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order. Kitchens in Broad Oak get their food hygiene inspections from Canterbury City council. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Keeping each certificate and photo report on file helps show the extract is looked after.
Bursars and site managers at schools such as Sturry Church of England Primary School tend to book extract cleaning for when the kitchen is empty. If you cook for passing trade around Sturry station, the extract can be cleaned between your last and first customer.
Broad Oak is about 2 miles north-east of Canterbury, in Kent. Wherever you are in the CT2 postcode area, we cover ductwork cleaning for commercial sites. Across Kent, we cover 922 places, Broad Oak among them. Our Maidstone page covers sites nearby, about 25 miles away.
All of CT2 is within our area for ductwork cleaning, from the main roads to the quietest streets. Streets in the area include Porty Road, Madeleine Road and Dragon Way, all of which we cover for ductwork cleaning. If your site is just outside Broad Oak, we cover Sturry (1 mile east), Calcott (1 mile north), Westbere (2 miles east), Hicks Forstal (2 miles north-east) and Hersden (2 miles east). Larger places within reach include Margate (13 miles north-east), Dover (14 miles south-east), Ramsgate (13 miles east), Broadstairs (14 miles east), Whitstable (5 miles north-west) and Deal (14 miles south-east).
What’s near Broad Oak
Around Broad Oak, our work takes us to kitchens and buildings near Chequer's Wood and Old Park, Spires Academy and Royal Oak Public House. The closest station to Broad Oak is Sturry station, roughly 0.7 miles south-east of the centre. Nearby you will also find St Martins Hospital (2.2 miles south) and Whitefriars Shopping Centre (2.6 miles south-west). Not far away are West Blean and Thornden Woods.
Fixed quotes for ductwork cleaning in Broad Oak
We do not publish a price list, because no two systems are the same. What we look at:
- One-off work versus a regular cycle
- The scale of the work
- Travel, parking and unloading
- Site requirements such as sign-in and permits
When the work has to happen, how we reach it and how big the site is can all change the price. We take each of them into account, and the price is fixed before we start.
What to send for a quote
To speed up the quote, send us:
- Any access panels or hatches you can see
- Photos showing the whole system and its surroundings
- How we’d reach plant on a roof or in a plant room
- Where the site is and what kind of site it is
Quoting starts with a diagnosis, from your photos and details or, where that isn’t enough, a survey on site. After that, you get a fixed price for the work so you know the cost before any work starts.
FAQs for Broad Oak
Which environmental health team covers Broad Oak?
The local authority for Broad Oak is Canterbury City council, and its environmental health team does the inspecting. How often a business is inspected depends on the risk rating the council gives it, so it’s worth staying ready all year.
Will you come out to Broad Oak?
Yes. Broad Oak is within the area we cover across London and the South East. A survey first, from photos or a visit, means we arrive with the right kit.
How much does ductwork cleaning cost in Broad Oak?
Size, condition, access and working hours all affect the cost. Ask us for a fixed quote and we will usually reply within one working day.
What paperwork do you give after a duct clean?
Readings, pictures and, for a full clean, a TR19 certificate. The report says when the next clean is due.
How long does ductwork cleaning take?
A short duct can be cleaned in a few hours, while long ducts and tall risers can need more than one visit. Visits are planned out of hours.
What information do you need?
Some photos and a quick description of the system, with the address and opening hours. We will ask for anything else we need.
How can I tell if my extract ducts are dirty?
The date on the last certificate is the first thing to check. No record, or a passed date, means it’s due, and grease readings will confirm how urgent it is.
Do you have a 24/7 line?
Yes, any time. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line, and we’ll advise on what to do next.
Nearby places to Broad Oak
Other services in Broad Oak
For landlords and multi-site operators
From a single site to a large estate, the standard is the same: a survey first, a fixed quote, the work timed around the site and a report with pictures.
Managing agents often deal with us directly. Send the address, what’s needed and how access works and we will come back with a fixed quote.
The process
Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. When the team arrives, the work area is protected and the relevant equipment is switched off to cool, and the work takes a shift or more, depending on the length of the runs and the number of access points. Visits to a village like Broad Oak are booked in advance, at a time that suits whoever runs the site.
- First the duct route is traced and every access point noted.
- Set points along the runs are tested for grease.
- Access panels are opened and heavy deposits scraped out by hand.
- Horizontal runs and risers are then degreased by the method that suits the deposit.
- We test again, take pictures and note any part that couldn’t be reached.
Preparing for the visit
- Let us know when the site is closed or quiet
- Let us know about parking and loading
- Let us know how we reach the system, including roofs, risers and plant rooms
Get a fixed quote
To help us quote: where the site is, what it is and its opening hours, a few pictures and the last certificate or report, if there is one. Once you have those, call us on 0345 646 2711 or email us.