Greater London · Ductwork cleaning

Brasted Chart ductwork cleaning

Ductwork cleaning for Brasted Chart and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.

  • Duct runs with no cleaning record
  • A grease test showing the duct is overdue
  • Hardened, baked-on grease in long horizontal runs

Ductwork cleaning near Brasted Chart

How we handle ductwork cleaning in Brasted Chart

Nobody sees duct grease building, so nobody notices it until something goes wrong. A flare-up drawn up from the range can light it, carrying a fire along the duct and into rooms far from the kitchen. Cleaning the duct takes that fuel away. Typical jobs include heavy grease at the base of a riser and ductwork that has never been cleaned, across horizontal duct runs, access panels and multi-storey ducts.

Across London, many commercial kitchens are squeezed into basements and narrow back-of-house spaces, and the duct may run up through several floors before it discharges at the roof. In Brasted Chart, as elsewhere in the capital, a long duct run means more access points to open and more grease to remove.

Think of the report as the system’s health record: dated, with photos, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal, ready for your insurer.

Location
Brasted Chart (TN16)
Wider area
Greater London
Reporting
Certificate and photo report
Price
A fixed price before we start
When we work
After hours by arrangement; emergencies any time
Phone
0345 646 2711
Last updated
30 October 2026
The Duct Doctor team standing beside their branded white and blue vans

What we do, step by step

On the day, we arrive at the time agreed with you, which is often after service, overnight or at a weekend. Equipment that has to be off is switched off and allowed to cool first, and the area around the work is covered and protected. The work itself takes a few hours for a short run, longer for long runs and tall risers. Night and weekend working is normal for us in London, and a site in Brasted Chart is no exception.

  1. First the duct route is traced and every access point noted.
  2. We measure grease thickness at set points before cleaning.
  3. Through the access panels, thick grease is removed by hand first.
  4. Horizontal runs and risers are then degreased by the method that suits the deposit.
  5. We test again, take photos and note any part that couldn’t be reached.

Getting ready for the visit

  • Make sure equipment near the work can be switched off and left to cool
  • Have your last certificate or report to hand
  • Tell us about site rules, permits or sign-in

How to get a quote

The quickest way to a quote is to send photos: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.

Get a price

Advice

When something else is needed

Ductwork cleaning can’t fix everything, and we’d rather say so up front. It will not put right:

  • Undersized or badly laid-out ducts
  • A failed fan motor at the end of the duct (a fan repair job)
  • Parts of the duct with no way in

If in doubt, call us on 0345 646 2711 or use the quote form and we will say what we think before you book.

What the work covers

  • Horizontal duct runs
  • Attenuators
  • Vertical risers
  • Access panels
  • Bends and junctions
  • Multi-storey ducts

Ductwork cleaning in Brasted Chart: the local picture

Food Standards Agency records include about 11 bars, pubs and nightclubs within about 1.5 miles of central Brasted Chart. A pub or hotel kitchen that cooks every day builds up grease in its extract like any other. In Brasted Chart, food businesses are inspected by environmental health officers from Sevenoaks council. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Before-and-after pictures from each clean are a simple way to show the extract is in hand. In London, kitchens are normally cleaned overnight, when the kitchen is closed and loading is easier.

Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Quebec House is about 1.2 miles west), access may need planning. A hospital like Tandridge Priory, about 3.3 miles west, is the kind of site where a kitchen may cook for patients, staff and visitors all day. Where a hall near Church of St Martin, or anywhere in Brasted Chart, hosts lunch clubs or events, its extract gathers grease just as a café’s does.

Brasted Chart is about 4 miles west of Sevenoaks, in Greater London. Whatever kind of site you run in Brasted Chart, we can take on ductwork cleaning. Visits can be booked for evenings, overnight or weekends so trading is not interrupted. Brasted Chart is one of 764 places in Greater London we cover for commercial clients. For sites nearby, see our London page, about 18 miles away.

Every address in TN16 is covered for ductwork cleaning, from the main roads to the quietest streets. If you need ductwork cleaning at premises on Chart Lane and Pipers Lane or a nearby road, our technicians can take on the work. We also cover the places around Brasted Chart: Brasted (1 mile north), Toy's Hill (1 mile south), Sundridge (1 mile north-east), Ide Hill (2 miles south-east) and Goathurst Common (2 miles south-east). Within a short drive, we also cover Orpington (8 miles north), Thornton Heath (13 miles north-west), Croydon (11 miles north-west), Streatham (15 miles north-west), Bromley (10 miles north) and West Norwood (14 miles north-west).

Around Brasted Chart

Brasted Chart’s nearest station is Sevenoaks station, about 3.6 miles east of the centre. Nearby you will also find Tandridge Priory (3.3 miles west). Green spaces nearby include Betsom's Hill and Dryhill Nature Reserve.

Map of Brasted Chart © OpenStreetMap contributors

Common questions in Brasted Chart

Which council inspects kitchens in Brasted Chart?

In Brasted Chart, it’s Sevenoaks council that carries out food hygiene inspections. Ratings are published by the Food Standards Agency, so a clean extract and good records are worth keeping up.

Can the work in Brasted Chart be done at night or at weekends?

Yes, out-of-hours work is a big part of what we do. The work in Brasted Chart can fit around your hours. Just give us a ring on 0345 646 2711 or use the quote form with your opening times and we’ll plan around them.

Do we lose a day’s trading?

Not typically. Out-of-hours visits keep the disruption down. Larger jobs can be phased over several visits to keep things running.

How far ahead should we book?

Book as early as you can for planned work, particularly if your next visit is nearly due. For emergencies, we take calls 24/7.

Do you look at the system first?

Yes. Every job is surveyed first, either from pictures and details you send or on a site visit. A fixed quote follows.

Is Brasted Chart in your area?

Yes. Brasted Chart is part of the area we cover, as part of our area across London and the South East.

Which sectors do you work in?

Restaurants and pubs, hotels, schools and colleges, hospitals and care homes, offices and retail, as well as food production and leisure sites.

Do you offer maintenance contracts?

Yes. Plans on a 3, 6 or 12-monthly cycle are available, depending on what the system needs.

How the job changes from site to site

Bends and transitions

Wherever the duct turns or changes size, grease builds up. Slowing air leaves grease behind, so these points get extra attention.

Attenuators and discharge

Attenuators, where fitted, quieten the extract, and their linings can soak up grease. They’re cleaned where possible and recorded if not.

What affects the quote in Brasted Chart

A fixed price needs a few facts first. We look at:

  • Site requirements such as sign-in and permits
  • What state the system is in
  • A single visit or a regular plan
  • Where the site is and how we reach it

We do not list prices on the website, because each job is priced on what it involves. Call for a fixed quote, and we will explain what it covers.

Asking for a quote

Before you ask for a quote, gather:

  • Anything you’ve noticed, such as smells, noise, drips or poor airflow
  • The times we could work without disrupting the site
  • The paperwork from the last visit, if you have it
  • Photos showing the whole system and its surroundings

Photos are enough for some jobs, while others need a look on site. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, you get a fixed price before work begins.

Managing agents and facilities teams in Brasted Chart

We also work for facilities teams across offices, schools and healthcare across Greater London. Work can be phased by floor, building or site to keep disruption down.

Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.

Why deal with it now?

There’s no law that names TR19. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, and grease in the duct is part of that. In Brasted Chart, as across London, ductwork often passes through shared risers and other people’s space.

Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we’ll go through it with you.

Why book with us

  • A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
  • Survey first, then a fixed quote
  • Full insurance on every job
  • A written report with photos after every visit

Read our cost guide or how to check a contractor.

Looking after it afterwards

So the system stays in good health:

  • Store the certificate with the fire risk assessment
  • Keep grease filters clean and fitted whenever you cook
  • Have the grease measured if cooking hours go up
  • Consider fitting panels where the report shows gaps

Every panel we open is refitted when we finish, and the area around them is cleaned down. Waste grease and water are taken away.

Extra access panels mean more of the duct gets cleaned each time. It doesn’t stop grease forming, but it stops it building unseen.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London