Kent · Ductwork cleaning
Bossingham ductwork cleaning
Specialist ductwork cleaning for Bossingham: a survey, a fixed price, careful work and proper paperwork. Ask us for a fixed quote.
- Hardened, baked-on grease in long horizontal runs
- Readings above 200 microns from a grease thickness test
- Fat dripping from the ductwork
About our ductwork cleaning in Bossingham
In doctor’s terms, the ductwork is the system’s arteries: find the blockages, clear them, then check the flow is right. Grease readings before and after give you the evidence, alongside before and after pictures. Typical jobs include proof of duct cleaning for the insurer and a rancid smell from the extract duct, across vertical risers, horizontal duct runs and multi-storey ducts.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, where grease settles in the flat sections. Access, parking and timings are agreed before the day.
Nothing is signed off by word of mouth: a dated report with pictures of the work, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. It shows what was done and what, if anything, couldn’t be reached.
- Where
- Bossingham (CT4)
- Region
- Kent
- Paperwork
- TR19® certificate and photo report
- Quotes
- Fixed quote, normally within a working day
- Working hours
- Out of hours as standard, 24/7 emergency line
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
Bossingham: your questions answered
Which council inspects kitchens in Bossingham?
Kitchens in Bossingham are inspected by Canterbury City council’s environmental health officers. How often a business is inspected depends on the risk rating the council gives it, so it’s worth staying ready all year.
Who is the fire and rescue service for Bossingham?
Fire safety enforcement in Bossingham is handled by Kent Fire and Rescue Service. It’s worth keeping your fire risk assessment, TR19® certificates and photo reports together, ready to show.
What’s involved in cleaning extract ducts?
We get into the duct through its access panels. Heavy grease is scraped out by hand, then the surfaces are degreased with a method that suits the deposit, such as degreasers, hot water or steam.
Do you have a 24/7 line?
Yes. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line, and we will advise on what to do next.
What do you do to protect the area?
We cover floors and nearby surfaces with sheeting before work begins, and waste is contained as we go. Before we leave, we tidy up and clean down.
How long will the duct clean take?
A short duct can be cleaned in a few hours, but long or complex ducts may take several visits. We plan the work around your kitchen.
Are you accredited?
We hold CHAS, SafeContractor and ISO 9001, alongside BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. The Vent Hygiene Elite scheme is run by BESCA and audited independently.
Is Bossingham in your area?
Yes. Our technicians work in Bossingham, within the South East and London area we cover.
Nearby places to Bossingham
What else we do in Bossingham
Common problems we fix in Bossingham
A duct with too few access doors can’t be fully cleaned. Stretches with no way in may never have been touched, and the grease there keeps building out of sight.
If you notice any of these, it’s worth a diagnosis:
- Grease pooling at the foot of the riser
- Duct runs that can’t be reached
- Hardened, baked-on grease in long horizontal runs
- A duct nobody has opened in years
Bursars and site managers at schools such as Stelling Minnis Church of England Primary School tend to book extract cleaning for when the kitchen is empty.
What to look for in a quote
- What paperwork you get at the end
- Whether VAT is included
- Whether they’re fully insured
- How they set the interval to the next visit
Different parts, different methods
Bends and transitions
Grease tends to pile up at elbows. It’s scraped out and degreased, and test it before and after.
Horizontal duct runs
A long flat run can’t be cleaned from one end. Where the gaps between panels are too long, we record what couldn’t be reached and can fit extra panels.
When something else is needed
In fairness, there are a few things this work will not fix:
- A duct that is too small or badly routed for the kitchen (a design issue)
- Leaking duct joints that need repair
- Faulty fire dampers
If in doubt, call 0345 646 2711 or drop us a line and we will say what we think before you book.
Parts of the system we cover
- Bends and junctions
- Access panels
- Multi-storey ducts
- Horizontal duct runs
- Attenuators
- Vertical risers
Between visits
Simple habits between visits make a real difference. Our advice:
- Keep access panels clear of stored items
- Keep your cleaning records together
- Have the grease measured if cooking hours go up
- Ask us about extra access panels where sections can’t be reached
You’ll have a recommended date for the next clean, worked out from the grease we found and how long you cook each day, in line with BESA guidance.
Have access panels fitted where sections cannot be reached. Grease you can reach is grease that gets removed.
Bossingham kitchens: local notes
Bossingham sits within the area of Kent Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel. Environmental health officers from Canterbury City council inspect food businesses in Bossingham. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. Keeping each certificate and photo report on file helps show the extract is looked after.
Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; Kent and Canterbury Hospital is the nearest hospital to Bossingham, about 4.7 miles north. Volunteers running a hall kitchen near Church of St Mary, or anywhere in Bossingham, may not know when the extract was last cleaned, and a grease test settles it.
Bossingham is about 6 miles south of Canterbury, in Kent. Across the CT4 area, we cover ductwork cleaning for commercial sites. Bossingham is one of 922 towns, villages and districts in Kent where we work for ductwork cleaning. Our Maidstone page covers sites nearby, about 24 miles away.
Here we cover the CT4 postcode area for ductwork cleaning. Streets in the area include The Street, Bossingham Street and Manns Hill, all of which we cover for ductwork cleaning. Other places close to Bossingham include Stelling Minnis (1 mile south-west), Waltham (2 miles west), Rhodes Minnis (4 miles south), Stowting Common (4 miles south-west) and Ottinge (4 miles south). Larger places within reach include Ashford (10 miles south-west), Canterbury (6 miles north), Dover (10 miles south-east), Folkestone (9 miles south-east), Whitstable (11 miles north) and Deal (14 miles east).
What’s near Bossingham
Bossingham’s nearest station is Chartham station, roughly 4.8 miles north-west. Nearby you’ll also find Kent and Canterbury Hospital (4.7 miles north).
What affects the cost of ductwork cleaning
The quote reflects the site in front of us. We take into account:
- Whether several sites go on one quote
- Site rules, permits and inductions
- Access, including roofs, risers and ceiling voids
- The times the site is available
Leaving it longer rarely makes the work cheaper. Problems in a system tend to grow, which can make the next visit longer. If you’re unsure, call us on 0345 646 2711 or email us for straight advice and a fixed quote.
Asking for a quote
You do not need the technical terms. Just send:
- A few general shots of the system
- The roof, plant room or outside wall the system runs to
- The times we could work without disrupting the site
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
Getting a quote doesn’t take long. Send a few details and pictures, and we usually reply with a fixed quote within one working day. Where a survey is needed, we arrange a time that suits the site.
What happens on the day
There are three stages on the day: set-up, the treatment itself and the sign-off. Getting ready means protecting surfaces and switching off what needs to be off, while signing off means the written report and photos. Most of the time goes on the work itself, which takes a few hours for a short run, longer for long runs and tall risers. We agree a date with you, plan the drive to Bossingham and turn up when the site is quiet.
- We trace the duct and find every way in.
- We take grease readings along the route.
- Once the kitchen has closed, we protect the area and open the panels.
- Heavy deposits come out by hand, then each section is degreased.
- Panels are closed, readings and pictures repeated, and unreachable sections recorded.
How to prepare
- Tell us about site rules, permits or sign-in
- Allow time for equipment near the work to be turned off and cool down
- Agree a time when the area can be out of use
How to get a quote
The quickest way to a quote is to send pictures: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Tell us what kind of site it is and when it’s open, and we can price many jobs without a visit.
Advice
What your team can do, and what needs us
Staff cleaning doesn’t replace a specialist visit; it supports it. Regular in-house cleaning slows the build-up, but the parts you can’t see still need a specialist at the right interval.
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. Inside the ducts, risers and fan is specialist work, and that is where we come in.