Buckinghamshire · Canopy and hood cleaning
Canopy Cleaning in Fleet Marston
Canopy cleaning for Fleet Marston, from a team that has been trading since 2009. Evenings, overnight and weekends, plus a 24/7 emergency line.
- Filters that never seem to stay clean
- A plenum thick with grease behind the filters
- Wet, greasy drips from the hood
What happens on the day
Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. Once we are in, the area is sheeted and anything that has to be off is turned off and cooled, and the work takes an hour or two for one small canopy, longer where there are several. Seeing the system in pictures first means the trip to Fleet Marston can be planned properly.
- First the canopy is surveyed, by photos or in person.
- Equipment below is switched off and left to cool, then sheeted.
- Filters come out and the plenum behind them is scraped and degreased.
- We degrease the canopy shell, its seams and the grease troughs.
- Filters go back, the area is cleaned down and photos are taken.
Getting ready for the visit
- Move anything stored near the system
- Mention any locked doors, roof access or ceiling voids
- Make sure equipment near the work can be switched off and left to cool
How to get a quote
Quoting starts with a diagnosis, from your photos and details or, where that is not enough, a survey on site. After that, you get a fixed price for the work so you know the cost before any work starts.
Related advice
Canopy cleaning in Fleet Marston
Every TR19® Grease clean includes the canopy, but a canopy can also need cleaning on its own, between full system cleans. Where that’s the case, we’ll be clear that the ducts and fan are not included, so your records stay accurate. The work covers plenum chambers, wall canopies and baffle filters, and people most often call us about greasy streaks across the canopy and condensation and grease dripping together.
For a kitchen in or near Fleet Marston, the visit is planned around opening hours and the journey, and the clean covers the whole system, as it would anywhere: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
Accreditations are easy to claim and worth checking. We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, with full insurance on top.
- Location
- Fleet Marston (HP18)
- Region
- Buckinghamshire
- Reporting
- TR19® certificate and photo report
- Quote
- A fixed price before we start
- Working hours
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026

Canopy cleaning in Fleet Marston: the local picture
The FSA’s food hygiene register shows about 11 restaurants, cafés and works canteens and about 10 takeaways in Fleet Marston and the streets around it, up to about 1.5 miles out. Where they cook under a hood, the plenum behind the filters is where grease hides. Fleet Marston is covered by Buckinghamshire Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract. In Fleet Marston, food businesses are inspected by environmental health officers from Buckinghamshire council. Extraction counts as kitchen equipment, so its condition can come up on the day. Our report lists what was cleaned and when, which is useful to have ready.
Term dates shape school work: for a school like Green Ridge Primary Academy, an extract clean fits neatly into a half-term or summer break. For kitchens close to Aylesbury Vale Parkway station, where the day often starts early and ends late, the extract can be cleaned overnight.
Fleet Marston is about 2 miles north-west of Aylesbury, in Buckinghamshire. We carry out canopy cleaning for businesses, landlords and public buildings in Fleet Marston and the rest of Buckinghamshire. Fleet Marston is one of 263 towns, villages and districts in Buckinghamshire we cover for canopy cleaning. You can also see our page for Milton Keynes, about 15 miles away.
Postcode districts we cover here for canopy cleaning: HP18. We also cover Haydon Hill (1 mile south-east), Quarrendon Estate (2 miles east), Fairford Leys (2 miles south-east), Stone (2 miles south) and Hartwell (2 miles south). Larger places within reach include High Wycombe (15 miles south), Chesham (14 miles south-east), Buckingham (12 miles north-west), Elmhurst (3 miles east), Southcourt (3 miles south-east) and Princes Risborough (8 miles south).
Landmarks near Fleet Marston
Around Fleet Marston, our work takes us to kitchens and buildings near Buckinghamshire UTC and the streets around them. There’s a railway station in Fleet Marston itself: Aylesbury Vale Parkway station. Nearby you’ll also find Roald Dahl Children's Gallery (2.5 miles south-east) and Friars Square (2.6 miles south-east).
Landlords, agents and facilities managers
If you look after several sites, we can schedule visits across all of them on one quote. Every building has its own written report, so records stay tidy.
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, which may be the employer, owner, landlord, FM or managing agent. With shared responsibility, good records help everyone.
Nearby places to Fleet Marston
What else we do in Fleet Marston
What your team can do, and what needs us
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. Leave those to us.
For ventilation and air handling systems, in-house care is mostly about checks: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
What a clean won’t put right
Not every problem is solved by canopy cleaning, and we’d rather say so up front. It doesn’t solve:
- A light fitting that doesn’t work
- Grease in the duct runs and risers behind the canopy
- Bent or broken filters
Not sure which it is? You can call 0345 646 2711, or email photos and we’ll tell you honestly before you book.
Where we work
- Wall canopies
- Plenum chambers
- Canopy light fittings
- Grease gutters
- Island canopies
- Baffle filters
Aftercare tips
So the system stays in good health:
- Clean the hood’s outer surfaces daily
- Leave the extract running until cooking stops
- Check filters aren’t leaving gaps
- Keep grease cups and drawers emptied
File the report alongside your fire risk assessment where an inspector can see it. Before and after photos speak for themselves.
Keep the fan running throughout service and for a short while after. Air that keeps moving carries less grease onto the canopy.
What we’re called out for in Fleet Marston
Air straight off the range hits the canopy first. Grease from the vapour lands on the canopy’s inner surfaces, its joints and its filters before what gets through reaches the plenum.
Any of these means the system needs a check-up:
- Greasy streaks across the canopy
- A canopy flagged at an environmental health inspection
- A plenum thick with grease behind the filters
- Fat running down the front of the hood
Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; St John's Hospital is the nearest hospital to Fleet Marston, about 2.1 miles south.
Before booking anyone
- Whether they recommend a next date
- Which accreditations they hold, and whether you can check them
- Exactly which parts of the system are covered
- What insurance they carry
What affects the cost of canopy cleaning
The price is fixed before any work begins. It’s based on:
- Working hours and out-of-hours timing
- The size of the system
- How many systems or sites are involved
- Site requirements such as sign-in and permits
Every site is different, so each one gets its own fixed quote. Size, access, the condition of the system and when we can work all make a difference.
What we need to know
We can often survey from photos. The most useful are:
- The roof, plant room or outside wall the system runs to
- The times we could work without disrupting the site
- Where the site is and what kind of site it is
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Common questions in Fleet Marston
Can you clean school kitchen extracts in Fleet Marston during the holidays?
Yes. The holidays are the usual time for school work. There are about 5 schools, colleges and universities on the FSA’s food hygiene register within about 1.5 miles of Fleet Marston. Booking early in the term gives the best choice of holiday dates.
Do you work overnight in Fleet Marston?
Yes, we can come after you close and finish before you open. The site is handed back ready to open. Your opening times are the first thing we ask for.
What do you do with what you remove?
We contain it and take it with us. We collect grease, debris and waste water as we go, so it doesn’t spread.
How much of the canopy do you clean?
All of it: the outer surfaces, the inner skin, the seams and the troughs. We also remove the filters and clean the plenum and housing behind them, since that is where grease hides.
Is TR19 cleaning required by law?
No, not in itself. Insurers, fire officers and EHOs look to TR19® as the benchmark, and many insurers ask for proof of cleaning to it. The legal duty sits in the Regulatory Reform (Fire Safety) Order 2005, which applies in England and Wales.
How far ahead should we book?
Earlier is better, particularly for night and weekend visits. We typically quote within one working day, and emergencies are covered by our 24/7 line.
Do you offer maintenance contracts?
Yes, of course. Tell us what you have and how it’s used and we will propose a schedule with a fixed quote.
Why does grease run off the canopy edge?
Normally because the troughs or gutters are full, or the plenum is overloaded. With nowhere to collect, the grease overflows, and condensation can carry it too. A canopy clean sorts it out.