Kent · Air handling unit cleaning
Air handling unit cleaning in Parkgate, Kent
Professional AHU cleaning in and around Parkgate, timed so the site keeps working and signed off in writing with pictures.
- Plant that needs cleaning after a refit
- Intake sections clogged with outdoor debris
- Rooms that smell stuffy when the system runs
Between visits
Simple habits between visits make a real difference. We recommend:
- Report stiff or damaged access doors
- Change filters on schedule and log each change
- Watch for drips or damp patches near the plant
- Check the drain tray is emptying during routine visits
Once the clean is done, we send a TR19® certificate and a report with before and after pictures. They belong in the plant or maintenance log.
Check drain trays and condensate drains during routine maintenance. Catching a slow drain early stops standing water building up.
AHU cleaning for kitchens and businesses in Parkgate
Think of an AHU clean as a full check-up for the ventilation. Every section is opened, cleaned and photographed, so you can see the unit’s condition for yourself. If you are dealing with dirty coils holding back the airflow and air handling units due a clean after building work, we can help.
In rural areas, ventilation units are often in roof voids or outbuildings, where filters and drain trays get forgotten.
The paperwork matters as much as the work. You get a written report with photos after each visit, listing what was done, anything we couldn’t reach and when the next visit is due. File it in your maintenance log so it’s to hand when an insurer or inspector asks.
- Where
- Parkgate (TN30)
- Wider area
- Kent
- Reporting
- Report and pictures after the visit
- Quotes
- Fixed quote, normally within a working day
- Working hours
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
What a clean won’t put right
We will not sell you work that does not address the problem, so these are the things it won’t cover:
- The supply and extract ducts, quoted separately
- Coils that are corroded or leaking and need replacing
- Building management system faults
If in doubt, call 0345 646 2711 or use the quote form and we’ll say what we think before you book.
Where we work
- Drain trays
- Supply and extract fans
- Internal panels
- Dampers and louvres
- Heating and cooling coils
- Filter sections
Parkgate: your questions answered
Will you come out to Parkgate?
Yes, Parkgate is part of our area, however small the site. Just mention lanes, gates or anything else about the site when you book.
Do you offer AHU cleaning in Parkgate?
Yes, Parkgate is covered. A fixed quote typically follows within one working day of the survey details.
Do you survey before quoting?
Yes. Every job is surveyed first, either from pictures and details you send or on a site visit. Then you get a fixed quote.
What do you need from me for a quote?
Only a few details: where it is, what kind of site, when it’s open and the access. Photos and any previous paperwork make it quicker. Then call us on 0345 646 2711, or send details by email.
Which parts of an air handling unit do you clean?
Everything inside the unit that air passes over, from the intake and filters through the coils and fan to the outlet. The photo report shows each section before and after.
Can you set up regular visits?
Yes. Regular plans can run on 3, 6 or 12-monthly cycles, to suit the system and how it’s used.
Do you clean the ductwork as well?
Yes, supply and extract ducts, grilles and diffusers. The survey shows whether the ducts need cleaning now.
How often should an air handling unit be cleaned?
That is set by inspection, in line with TR19® Air. A hard-working unit, or one serving a hospital or care home, may need cleaning more often.
Nearby places to Parkgate
Other services in Parkgate
What staff can safely do
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, they should report it rather than try to fix it. We can diagnose it and quote.
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
Why deal with it now?
A clean unit feeds cleaner air into the ductwork, so the ducts and grilles stay cleaner between cleans. It also means the next inspection has less to find. A planned visit to Parkgate is easier to arrange than an emergency callout.
A single site or a whole portfolio, we price it on the same basis: the work involved, the access and the timing. You will have a fixed price before any work starts.
What you get with us
- A single point of contact for sites across the South East and London
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- Fixed quotes from a survey or pictures
- Out-of-hours work and a 24/7 emergency line
Read what affects the cost and our accreditations.
What the work involves, part by part
Heating and cooling coils
Because cooling coils run wet, the dirt on them tends to cling. The coil and its drain tray are cleaned as one job.
Filters
Filter condition tells you a lot about the rest of the unit. They’re photographed before and after for your records.
What happens on the day
When we arrive, we check the system against the survey or the pictures you sent. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes a single shift for a typical unit, longer for large or heavily soiled ones. A few pictures of the system help us make the most of a visit to a place like Parkgate.
- We survey the unit from photos or on site and agree what’s included.
- With your site team, the unit is switched off and isolated, then the area around it protected.
- We clean or change the filters as agreed, then clean the coils, fan and internal panels.
- We clean out the drain tray and make sure it drains.
- A TR19® certificate and photo report follow the clean.
How to prepare
- Let us know when the site is closed or quiet
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Clear loose items from the work area
Ask for a quote
The quickest way to a quote is to send photos: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and we can price many jobs without a visit.
Read more
AHU cleaning in Parkgate: local notes
For Parkgate, the closest hospital is Benenden Hospital, roughly 1.5 miles west. Clean air matters most where people are unwell, and that’s as true in a care home as in a hospital. About 43 miles out from central London, Parkgate is part of the South East area we work across. Evening, overnight and weekend visits are all possible.
Benenden Hospital, about 1.5 miles west, is the nearest hospital to Parkgate, and healthcare sites of every size need their supply air kept clean. For schools like Homewood School, the holidays are the usual time to inspect and clean ventilation.
Parkgate is about 10 miles south-west of Ashford, in Kent. Across the TN30 area, we can carry out AHU cleaning at your premises. Parkgate is one of 922 towns, villages and districts in Kent where we work for AHU cleaning. You can also see our page for Maidstone, roughly 14 miles from Parkgate.
Work in TN30 follows the same survey, fixed quote and written report as everywhere else we cover. You’ll find streets such as Cranbrook Road, Millpond Lane and Tenterden Road, all of which we cover for AHU cleaning. Neighbouring places we cover for AHU cleaning include Clapper Hill (1 mile north-west), East End (1 mile west), Strood (2 miles south), Fosten Green (2 miles north-west) and London Beach (2 miles north-east). We also work in nearby towns such as Maidstone (14 miles north-west), Ashford (10 miles north-east), Foley Park (15 miles north), Paddock Wood (13 miles north-west), Bearsted (13 miles north) and Park Wood (12 miles north).
Near you in Parkgate
In Parkgate, that means kitchens and buildings near Wattle Wood, among other places. Well-known places in the area include Mervyn Quinlan Museum (1.5 miles west) and Benenden Hospital (1.5 miles west).
For landlords and multi-site operators
Whether it’s one building or many, you get the same standard: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.