Kent · TR19 inspections and grease testing
TR19 inspections in Smarden Bell
TR19 inspection across Smarden Bell and nearby, timed so the site keeps working and finished with a written report and pictures.
- Insurance renewals needing proof of TR19 cleaning
- Kitchens taken over with no cleaning records
- Sections of duct that cannot be reached
The process
Our technicians bring everything the work needs, including protection sheets, the right tools and access kit. You only need to give us clear access and switch off what needs to be off. On site, the work takes around an hour or two per canopy and duct system. A few pictures of the system help us make the most of a visit to a place like Smarden Bell.
- Post-clean verification is booked once the clean is done.
- The same access points are opened up.
- Grease readings are taken again at set points.
- We photograph each area to record how it was left.
- The results are reported, with anything missed flagged.
Before we arrive
- Find the previous report, if there is one
- Tell us about site rules, permits or sign-in
- Agree a time when the area can be out of use
Ask for a quote
Here’s what helps us quote: the address, the type of site and when it’s open, a few pictures and the last certificate or report, if there is one. Then give us a ring on 0345 646 2711 or email us.
Advice
How we handle TR19 inspection in Smarden Bell
Think of a TR19 inspection as the diagnosis before the treatment. We look at the system, take grease readings and photograph what we find, so the clean can be planned properly. The work covers post-clean checks, wet film thickness tests and pre-clean surveys, and common reasons people get in touch are systems that need surveying before cleaning and sites with gaps in their extract records.
Somewhere as small as Smarden Bell, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Every one of them still needs its extract kept clear of grease, whatever the size of the place.
Nothing is signed off by word of mouth: a dated report with pictures of the work, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. It shows what was done and what, if anything, couldn’t be reached.
- Where
- Smarden Bell (TN27)
- Region
- Kent
- Records
- TR19® certificate and photo report
- Quotes
- A fixed price before we start
- When we work
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
Kitchen extracts in Smarden Bell
According to Food Standards Agency records, there are about 3 pubs and bars in Smarden Bell and the streets around it, up to about 1.5 miles out. Breakfasts, bar meals and functions all put grease into the extract wherever they’re cooked. Food hygiene inspections in Smarden Bell are the job of Ashford council’s environmental health team. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. A dated certificate in the maintenance file answers the question before it’s asked. Fire safety in Smarden Bell falls to Kent Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel.
Where a hall near Church of St Michael, or anywhere in Smarden Bell, hosts lunch clubs or events, its extract gathers grease just as a café’s does. Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; Benenden Hospital is the nearest hospital to Smarden Bell, about 5.5 miles south-west. School kitchens, at schools like Smarden Primary School for example, are typically cleaned in the holidays so no lunches are lost.
Smarden Bell is about 9 miles west of Ashford, in Kent. Sites in Smarden Bell get the same service as everywhere we cover: diagnosis first, a fixed price, out-of-hours working where needed and a written report with pictures. We cover 922 places across Kent, from busy centres to quieter spots. Our Maidstone page covers sites nearby, about 10 miles away.
Every address in TN27 is covered for TR19 inspection, from busy streets to back roads. We cover sites on Bell Lane and Headcorn Road and nearby roads. If your site is just outside Smarden Bell, we cover Swift's Green (1 mile north), Smarden (1 mile south-east), Biddenden Green (1 mile east), Monk's Hill (1 mile south) and Lashenden (2 miles south-west). Within a short drive, we also cover Maidstone (10 miles north-west), Ashford (9 miles east), Sittingbourne (13 miles north), Faversham (14 miles north-east), Kings Hill (14 miles north-west) and Davington (14 miles north-east).
Around Smarden Bell
In Smarden Bell, that means kitchens and buildings near The Bell Inn. Smarden Bell’s nearest station is Headcorn station, roughly 2 miles west. Well-known places in the area include Romden Castle (1.8 miles south-east) and Kent Firefighting Museum (2.8 miles south-west).
What happens if it’s left?
Surveying first means the clean goes to plan. Access problems are spotted in advance rather than on the night, so the clean covers the whole system. A planned visit to Smarden Bell is easier to arrange than an emergency callout.
The cost depends on how big the system is, the condition it’s in and how easy it is to reach. We give you a fixed price before any work starts, so there are no surprises.
Why book with us
- Out-of-hours work and a 24/7 emergency line
- A fixed price before any work starts
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Full insurance on every job
Take a look at how cleaning jobs are priced or our accreditations.
For landlords and multi-site operators
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, which may be the employer, owner, landlord, FM or managing agent. Where responsibility is shared, records matter even more.
If you look after several sites, we can schedule visits across all of them on one quote. Each site gets its own report and pictures, so records stay tidy.
What a clean won’t put right
TR19 inspection cannot fix everything, and we’ll tell you before any work starts. It does not solve:
- Fire safety duties beyond the extract system
- Removing the grease, which is a separate clean
- Hidden runs that need access panels first
If you are not sure, just call 0345 646 2711, or send details by email and we will give you a straight answer.
What we work on in Smarden Bell
- Pre-clean surveys
- Insurer audits
- Deposit thickness tests
- Access surveys
- Post-clean checks
- Wet film thickness tests
Between visits
Simple habits between visits make a real difference. We recommend:
- Keep to the recommended interval
- Keep the route to access panels clear
- Never cook with filters missing
- Share inspection reports with your insurer or broker when asked
For an insurer audit, send them the report as it is, with readings, photos and any areas not accessible.
Fit access panels where the survey finds sections cannot be reached, so grease isn’t left building in hidden parts.
What your team can do, and what needs us
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but the parts you can’t see still need a specialist at the right interval.
Away from the kitchen, the in-house job is mainly checking: clear grilles, a log of filter changes and reporting anything odd. Cleaning inside ducts and units is specialist work.
Your questions about TR19 inspection in Smarden Bell
Will you come out to Smarden Bell?
Yes. Smarden Bell is within the area we cover across London and the South East. The journey is planned ahead, so a few details about the route help.
Who is the fire and rescue service for Smarden Bell?
Fire safety enforcement in Smarden Bell is handled by Kent Fire and Rescue Service. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
Do you check other contractors’ cleans?
We visit after a clean, take readings at set points and photograph the system. The report flags anything missed.
Do we have to follow TR19 by law?
No. TR19® is BESA’s specification and the industry benchmark, not legislation. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005, which requires the responsible person to reduce fire risk, and insurers, fire officers and EHOs look to TR19® as the benchmark.
What does TR19 inspection cost?
Size, condition, access and working hours all affect the cost. Call for a fixed quote, typically ready within one working day.
What do the grease readings need to be?
Between cleans, the mean should stay at 200 microns or below, with 500 microns or more anywhere needing immediate spot cleaning.
What is grease thickness testing?
Readings are taken using the Wet Film Thickness Test or the Deposit Thickness Test, then compare them with the TR19® Grease figures.
What happens on a pre-clean survey?
It’s a look at the whole extract before it’s cleaned, with readings and pictures. The survey can be done from photos and details or on site, whichever suits the system.
Different parts, different methods
Vertical risers
Risers can be hard to get into. The survey shows exactly what access there is.
Schools, hospitals and care homes
We fit testing around service times and school holidays so meals are not affected.