Oxfordshire · TR19 inspections and grease testing

TR19 inspections and grease testing in Roke, Oxfordshire

Our technicians work in Roke on TR19 inspections, grease thickness testing, pre-clean surveys and post-clean verification. Out-of-hours visits, a fixed quote and a written report with photos as standard.

  • Kitchen extract systems with no recent grease readings
  • Heavy grease suspected in the plenum or ducts
  • Kitchens taken over with no cleaning records

Need TR19 inspection in Roke?

TR19 inspection for kitchens and businesses in Roke

A grease test measures how thick the grease is inside a kitchen extract system. Readings are taken at set points using the Wet Film Thickness Test (WFTT) or the Deposit Thickness Test (DTT). The results show whether the system needs cleaning and how soon. We are often asked to deal with ductwork where grease may be over the TR19 limits and an insurer’s request for a TR19 audit, across access surveys, insurer audits and wet film thickness tests.

Somewhere as small as Roke, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Each still has a canopy and duct that collect grease.

Nothing is signed off by word of mouth: a dated report with photos of the work, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. Any parts we couldn’t reach are recorded on it too.

Place
Roke (OX10)
Wider area
Oxfordshire
Reporting
Certificate and photo report
Price
A fixed quote up front
Hours
After hours by arrangement; emergencies any time
Telephone
0345 646 2711
Last updated
30 October 2026
Inside an extract duct: heavy deposits on the left, cleaned metal on the right

What the work involves, part by part

Extract fan and discharge

We look at where the extract discharges outside, since grease reaches the very end of the system.

Canopy and plenum

Filters can look fine while the plenum behind them is heavily coated. So we measure behind the filters, not just in front.

How it works

Night work is normal for us. Evenings, nights and weekends are when much of our work happens, so the site can open as normal afterwards. On site, the work takes a couple of hours for a typical kitchen extract system. Pictures of the system and its access let us plan the work in Roke before we set off.

  1. First we look at the system’s cleaning history, if there is one.
  2. We follow the extract from canopy to discharge.
  3. Access panels are located and any missing ones noted.
  4. Grease readings are taken and photos recorded.
  5. We report back with readings and a fixed quote.

Getting ready for the visit

  • Let us know about parking and loading
  • Name a contact who can let us in at the agreed time
  • Tell us the best time to work, such as after service or at a weekend

Getting a quote

To get a fixed quote, ring 0345 646 2711 or email us with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. You will usually have a quote within one working day.

Get a quick quote

Related advice

Do you need TR19 inspection in Roke?

Grease in a duct is flammable fuel. Flames from the range can be pulled into the canopy and travel through the ducts to other parts of the building. Measuring it is the first step to keeping it under control.

Keep an eye out for any of the following:

  • Post-clean verification after another contractor’s clean
  • Systems that need surveying before cleaning
  • Cleaning intervals that may not suit the kitchen
  • Kitchen extract systems with no recent grease readings

Brightwell Manor, about 3.4 miles south-west, is one of the historic houses near Roke; if you run event catering at a venue like that, cleans can be booked between functions.

What to look for in a quote

  • Whether the price is fixed
  • Whether the quote is based on a survey or photos
  • How they set the interval to the next visit
  • Whether they’re fully insured

How to choose an extract cleaning contractor

Managing agents and facilities teams in Roke

Facilities teams in offices, schools and healthcare sites book us too across Oxfordshire. Larger estates can be phased building by building around the people who use them.

Running several sites is easier with one contractor. We work across London and the South East, so visits at different addresses can be planned together and kept to a regular schedule.

Questions from Roke

Which fire authority looks after Roke?

Roke is in the area of Oxfordshire Fire and Rescue Service. A recent cleaning certificate and a note of the next clean date show that grease in the extract is being managed.

Can you get to a site in Roke?

Yes, smaller places are covered as well as towns. A survey first, from photos or a visit, means we arrive with the right kit.

Which accreditations do you hold?

We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we’re fully insured.

What is grease thickness testing?

Grease thickness testing measures the layer of grease on the duct surfaces, by WFTT or DTT. Each reading is recorded in microns.

Is there a survey before the work?

Yes. Photos often do the job, while bigger or harder-to-see systems are surveyed on site.

Do you carry out TR19 audits for insurers?

Yes. Insurers often want evidence the extract is managed to TR19®, and an audit report gives you that, with recommendations where something needs doing.

Where does the waste go?

We contain it and take it with us. We collect grease, debris and waste water as we go rather than letting it spread.

Do you offer maintenance contracts?

Yes. Regular plans can run on 3, 6 or 12-monthly cycles, to suit the system and how it’s used.

What TR19 inspection cannot fix

To be straight with you, there are a few things this work will not fix:

  • Hidden runs that need access panels first
  • Mechanical faults in the extract
  • Removing the grease, which is a separate clean

Not sure which it is? You can call 0345 646 2711, or send details by email and we will tell you honestly before booking.

What the work covers

  • Wet film thickness tests
  • Pre-clean surveys
  • Insurer audits
  • Post-clean checks
  • Deposit thickness tests
  • Access surveys

Leave it or put it right?

Without readings, you’re guessing when to clean. If grease reaches 500 microns anywhere, TR19® Grease calls for immediate spot cleaning, which you will not know without measuring. Out of sight is the usual reason a rural system goes too long without attention.

You will not find a price list here, because each job is priced on what it involves. Call for a fixed quote, and we’ll explain what it covers.

Why Roke businesses choose us

  • Evenings, overnight and weekends, plus 24/7 emergency callout
  • Every job surveyed first
  • A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
  • A fixed price before any work starts

See what affects the cost or our accreditations.

Looking after it afterwards

To keep the system working properly between visits:

  • Share inspection reports with your insurer or broker when asked
  • Clean or swap grease filters as often as the kitchen needs
  • Wipe the canopy surfaces regularly
  • Keep to the recommended interval

Any access problems we found are listed with a suggested fix. With panels fitted, the next clean can cover every section.

Keep all TR19 records together so the history is easy to show.

What TR19 inspection looks like in Roke

Roke is about 44 miles from central London, well within the area we cover across London and the South East. Evening, overnight and weekend visits are all possible. Oxfordshire Fire and Rescue Service covers Roke. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.

For schools such as Benson Church of England Primary School, kitchen extract cleaning is usually booked for the holidays, when the canteen is closed. Church and community hall kitchens, near Church of St Helen or anywhere around Roke, are easy to forget, but their extracts collect grease like any other.

Roke is about 7 miles east of Didcot, in Oxfordshire. Every kind of commercial site in Roke, we can take on TR19 inspection. Visits can be booked for evenings, overnight or weekends so the site keeps running. We cover 443 places across Oxfordshire, large and small. You can also see our page for Oxford, roughly 10 miles from Roke.

Our technicians cover all of the OX10 postcode area for TR19 inspection and the roads nearby. Other places close to Roke include Ewelme (2 miles south-east), Brightwell Baldwin (2 miles north-east), Chalgrove (2 miles north), Britwell Salome (3 miles east) and Watlington (4 miles east). Larger places within reach include Oxford (10 miles north-west), Didcot (7 miles west), Abingdon-on-Thames (8 miles west), Thame (9 miles north-east), Wantage (14 miles west) and Henley-on-Thames (11 miles south-east).

Local landmarks in Roke

In Roke, that means kitchens and buildings near Home Sweet Home pub and Wallingford School. Nearby you’ll also find Aston Martin Heritage Trust Museum (2.4 miles north-west) and Wallingford Castle (2.5 miles south-west). Green spaces nearby include Wittenham Clumps and Ewelme Watercress Beds.

Map of Roke © OpenStreetMap contributors
BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London