Isle of Wight · TR19 inspections and grease testing

TR19 inspections in Pyle

Specialist TR19 inspection for Pyle: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.

  • Sites with gaps in their extract records
  • Insurance renewals needing proof of TR19 cleaning
  • Confirming a clean reached the whole system

TR19 inspection for sites in Pyle

TR19 inspection in Pyle

BESA sets minimum cleaning intervals by daily use: heavy use (12 to 16 hours a day) every 3 months, moderate use (6 to 12 hours) every 6 months and light use (2 to 6 hours) every 12 months. Those are minimums, and grease readings help set the real interval. If you have missing access panels found on survey and checking the result of a recent clean, we can help, from wet film thickness tests, access surveys and post-clean checks onwards.

Work in a small place like Pyle starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.

The paperwork matters as much as the work. You get a written report with photos after every visit, listing what was done, anything we couldn’t reach and when the next visit is due. File it in your maintenance log so it’s to hand when an insurer or inspector asks.

The Duct Doctor team standing beside their branded white and blue vans
Where
Pyle (PO38)
Region
Isle of Wight
Reporting
Certificate plus before-and-after pictures
Quotes
A fixed price before any work starts
Working hours
Overnight and weekend work, 24/7 emergency callout
Phone
0345 646 2711
Updated
30 October 2026

Pyle kitchens: local notes

At about 1 mile from the coast, Pyle is close enough for sea air to matter. Near the sea, the fan and discharge at the top of a kitchen extract corrode faster than they would inland. It’s Isle of Wight council that sends environmental health officers to food businesses in Pyle. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. Before-and-after pictures from each clean are a simple way to show the extract is in hand. Fire safety in Pyle falls to Hampshire and Isle of Wight Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.

Where a hall near St Andrew's Church, or anywhere in Pyle, hosts lunch clubs or events, its extract gathers grease just as a café’s does. Healthcare kitchens can’t easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Pyle is Whitecroft Hospital, about 4.5 miles north.

Pyle is about 6 miles south of Newport, in the Isle of Wight. Whatever kind of site you run in Pyle, we can take on TR19 inspection. Visits can be booked for evenings, overnight or weekends so trading is not interrupted. Across the Isle of Wight, we cover 125 places, and Pyle is one of them. You can also see our page for Portsmouth, about 18 miles away.

Every address in PO38 is within our area for TR19 inspection, from the main roads to the quietest streets. We cover sites on Pyle Shute, Westside Lane and Atherfield Road and nearby roads. If your site is just outside Pyle, we cover Chale Green (1 mile north-east), Atherfield Green (1 mile north-west), Little Atherfield (1 mile north-west), Shorwell (3 miles north-west) and Thorncross (3 miles north-west). Larger places within reach include Newport (6 miles north), Ryde (11 miles north-east), Cowes (10 miles north), Sandown (8 miles north-east), Shanklin (7 miles east) and Ventnor (5 miles east). Remote and island sites need a little more planning, so tell us where you are when you ask for a quote for TR19 inspection.

Near you in Pyle

Well-known places in the area include Blackgang Sawmill Museum (1.4 miles south-east) and Whitecroft Hospital (4.5 miles north). For a walk, there’s Stenbury Down.

Map of Pyle © OpenStreetMap contributors

When something else is needed

We’d rather tell you now than book work that will not help, so these are the things it won’t cover:

  • Mechanical faults in the extract
  • Ductwork that was designed or installed badly
  • Removing the grease, which is a separate clean

Not sure which it is? You can call 0345 646 2711 or drop us a line and we’ll tell you honestly.

What the work covers

  • Wet film thickness tests
  • Pre-clean surveys
  • Access surveys
  • Insurer audits
  • Post-clean checks
  • Deposit thickness tests

Do you need TR19 inspection in Pyle?

Grease builds up as cooking vapour cools inside the extract. It often collects where nobody can see it: the plenum, bends and horizontal runs.

What we are most often called out for:

  • Surveys needed before quoting a full clean
  • Ductwork where grease may be over the TR19 limits
  • Sites with gaps in their extract records
  • Post-clean verification after another contractor’s clean

If your kitchen is in a listed or historic building, like the houses around Pyle (Wolverton Manor is about 2.7 miles north-west), fitting access panels needs care.

Before you book anyone

  • Whether a written report and photos are included
  • Proof of insurance
  • Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
  • How VAT is shown on the quote

Choosing a duct cleaning contractor

Pyle questions

Who would carry out a food hygiene inspection at a kitchen in Pyle?

The local authority for Pyle is Isle of Wight council, and its environmental health team does the inspecting. Have your latest TR19® certificate and photo report to hand, as an officer may ask how the extract is maintained.

Can you get to a site in Pyle?

Yes, Pyle is part of our area, however small the site. The journey is planned ahead, so a few details about the route help.

Do you offer emergency callouts?

Yes, any time. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line, and we’ll advise on what to do next.

At what point does grease need cleaning?

Between cleans, the mean should stay at 200 microns or below, with 500 microns or more anywhere needing immediate spot cleaning.

What is a WFTT or DTT grease test?

We measure the grease at set points with a WFTT or DTT test, then compare them with the TR19® Grease figures.

What do you need from me for a quote?

Only a few details: the address, the site type, your opening hours and how we reach the system. Photos and any previous paperwork make it quicker. Then call us on 0345 646 2711, or send details by email.

Can you verify a clean after it’s been done?

Verification means repeat readings and photos once the clean is done. The report flags anything missed.

Is TR19 a legal requirement?

No, not in itself. But the responsible person must assess and reduce fire risk under the Fire Safety Order 2005, and grease in the extract is part of that. Many insurance policies also require TR19 adherence.

How we price TR19 inspection

The quote reflects the site in front of us. We consider:

  • One-off work versus a regular cycle
  • The times the site is available
  • Whether we need access equipment or extra panels
  • Any permits to work or inductions

Every site is different, so we price each one individually. Size, access, the condition of the system and when we can work all make a difference.

Asking for a quote

There’s no need for technical detail. Just send:

  • When the site is open and when it’s quiet
  • A few general shots of the system
  • The site address and the type of premises
  • Detail shots of panels, filters and grilles

Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.

What staff can safely do

Staff cleaning and specialist work are not the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but they do not reach the grease that builds up further in. That part needs specialist access and equipment.

Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, which is where we come in.

Aftercare tips

Once we have finished, these simple steps help:

  • Diary the next grease test and clean
  • Keep TR19 certificates, readings and reports together
  • Flag oily drips near the extract
  • Share inspection reports with your insurer or broker when asked

After post-clean verification, file the results with the cleaning certificate. Together they show the system was cleaned and checked.

Keep certificates, reports and readings in one place so the history is easy to show.

What happens on the day

At the end of the visit, someone from your team can look over the work with us. Anything we couldn’t reach or that needs attention is pointed out there and then, and the same goes into the written report. The visit takes a couple of hours for a typical kitchen extract system. Visits to a village like Pyle are booked in advance, at a time that suits whoever runs the site.

  1. First we book a time that won’t disrupt cooking.
  2. We look over the canopy, plenum, ducts, fan and discharge.
  3. We take WFTT or DTT readings at set points along the system.
  4. We photograph the test points and record any sections we cannot reach.
  5. We send a report setting out the readings, photos and next steps.

Preparing for the visit

  • Move anything stored near the system
  • Find the previous report, if there is one
  • Plan for cooking equipment or plant to be off before we arrive

Get a fixed quote

We do not publish a price list, because no two systems are the same. We look at your system first, from photos or on a visit, then send a fixed quote. To get going, call us on 0345 646 2711 or drop us a line.

Get a quick quote

Read more

Why deal with it now?

Post-clean verification shows whether the system was left the way the certificate says, while there’s still time to put anything right. It’s worth booking a check, because nobody sees inside a duct day to day.

What you pay reflects the actual work. That is why we survey first, from pictures or on site, and why the quote is fixed before any work starts.

What you get with us

  • Survey first, then a fixed quote
  • Accredited under CHAS and SafeContractor, with ISO 9001
  • Every visit written up, with pictures
  • We’re fully insured

See how cleaning jobs are priced or how to check a contractor.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London