Kent · TR19 inspections and grease testing
TR19 inspections in Milstead
For TR19 inspections and grease testing in Milstead, one call is all it takes, from survey to sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Systems cleaned on a calendar with no measurements
- Insurance renewals needing proof of TR19 cleaning
- Cleaning intervals that may not suit the kitchen
How it works
On the day, we arrive at the time agreed with you, which is often after service, overnight or at a weekend. Anything that needs to be off for the work is switched off and left to cool before work begins, and the area around the work is covered and protected. On site, it takes an hour or two for a single kitchen, longer for a large or complex system. Photos of the system and how to reach it help us plan a visit to Milstead.
- First we look at the system’s cleaning history, if there is one.
- The layout is traced from the canopy to the discharge.
- We note where access panels are and where more are needed.
- We measure the grease and photograph each point.
- We report back with readings and a fixed quote.
Preparing for the visit
- Have your last certificate or report to hand
- Agree a time when the area can be out of use
- Make sure equipment near the work can be switched off and left to cool
Get a fixed quote
We don’t publish a price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, and then give you a fixed quote. To start, phone us on 0345 646 2711 or drop us a line.
Read more
TR19 inspection in Milstead, done properly
BESA sets minimum cleaning intervals by daily use: heavy use (12 to 16 hours a day) every 3 months, moderate use (6 to 12 hours) every 6 months and light use (2 to 6 hours) every 12 months. Grease testing shows whether your kitchen needs cleaning more often than that. Common call-outs are for uncertainty over how often to clean and missing access panels found on survey, on deposit thickness tests, post-clean checks and access surveys.
For a kitchen in or near Milstead, the visit is planned around opening hours and the journey, and the clean itself is the same full TR19® job as in any town: canopy to discharge, then a TR19® certificate and a photo report.
The report is your system’s health record: a dated account with pictures of everything we did. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal and sits alongside the report.
- Place
- Milstead (ME9)
- Region
- Kent
- Reporting
- TR19® certificate and photo report
- Quotes
- A fixed quote up front
- Hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
Do you need TR19 inspection in Milstead?
TR19® is the benchmark that insurers, fire officers and EHOs refer to. It isn’t legislation; the legal duty comes from the Fire Safety Order 2005, under which the responsible person must reduce fire risk, and grease in the extract is part of that risk.
Clients usually contact us after spotting one of these:
- Checking the result of a recent clean
- Uncertainty over how often to clean
- Extracts that have never been grease tested
- Extracts that may be over the 200 micron mean
A hall kitchen that only cooks for events, whether near Church of St Mary and the Holy Cross or elsewhere in Milstead, still needs its extract cleaned, just less often.
Comparing quotes
- Whether the quote shows VAT
- What’s included in the scope, part by part
- What happens if part of the system can’t be accessed
- If the quote is a fixed price or an estimate
How the job changes from site to site
Schools, hospitals and care homes
School and college kitchens still need their extract checked. Readings show if the interval is right.
Restaurants, pubs and hotels
A kitchen running from breakfast to late service builds grease quickly. Regular testing shows whether the cleaning interval keeps up.
What TR19 inspection can’t fix
A few issues sit outside what this work can do:
- Mechanical faults in the extract
- Heavy deposits found on test, which still need cleaning
- Parts of the duct nobody can reach yet
Not sure which it is? You can give us a ring on 0345 646 2711 or send us an email and we will tell you honestly before you book.
What we work on in Milstead
- Access surveys
- Pre-clean surveys
- Deposit thickness tests
- Post-clean checks
- Insurer audits
- Wet film thickness tests
Towns and villages near Milstead
More services for Milstead
FAQs for Milstead
Can a school canteen extract in Milstead be done out of term time?
Yes. Half-terms and the summer break are the natural time for school work. With about 2 schools and colleges on the FSA’s register within roughly a mile and a half of Milstead, it pays to plan holiday dates ahead. Tell us your holiday dates and we’ll book the visit for when the site is empty.
Who would carry out a food hygiene inspection at a kitchen in Milstead?
Food hygiene inspections in Milstead are carried out by Swale council. How often a business is inspected depends on the risk rating the council gives it, so it’s worth staying ready all year.
How do you protect the area?
By covering it before any work starts. We keep the work contained and leave the area clean.
What happens to the waste?
We take it away when we go. While we work, it’s kept contained so the area stays clean.
How often should a kitchen extract be inspected?
Often enough to know the mean stays under 200 microns between cleans. If readings rise, the interval should shorten.
Do you work out of hours?
Yes. Give us your opening hours with your enquiry and we’ll plan the visit around them.
What happens on a pre-clean survey?
We look at the system from canopy to discharge, take grease readings and check access. From it, we plan the clean and quote a fixed price.
How far ahead should we book?
For planned work, earlier is better, particularly if your next visit is nearly due. For emergencies, we take calls 24/7.
What affects the quote in Milstead
Before we fix a price, we need to know a few things. We look at:
- How big the system is
- Travel, parking and unloading
- The condition of the system
- When the work can happen, such as evenings, overnight or weekends
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we will explain each part.
Asking for a quote
We can often survey from pictures. The most useful are:
- A few general shots of the system
- Any access panels or hatches you can see
- Where the site is and what kind of site it is
- How we’d reach plant on a roof or in a plant room
Quoting starts with a diagnosis, from your pictures and details or, where that isn’t enough, a survey on site. Then we send a fixed price so you know the cost before any work starts.
Between visits
To keep the system working properly between visits:
- File every inspection report with your certificates
- Report grease dripping from the canopy
- Share inspection reports with your insurer or broker when asked
- Never cook with filters missing
Readings of 500 microns or more are highlighted as needing immediate spot cleaning, and we can arrange it.
Keep filters clean and in place. Missing or damaged filters let grease straight into the plenum.
Landlords, agents and facilities managers
We regularly work with managing agents. Tell us the site, the work and the access arrangements, and we’ll send a fixed quote.
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, which may be the employer, owner, landlord, FM or managing agent. With shared responsibility, good records help everyone.
Kitchen extracts in Milstead
Environmental health officers from Swale council inspect food businesses in Milstead. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. Keeping each certificate and photo report on file helps show the extract is looked after. Milstead is about 38 miles from central London, well within the area we cover across London and the South East. Evening, overnight and weekend visits are all possible.
For schools such as Milstead and Frinsted Church of England Primary School, kitchen extract cleaning is typically booked for the holidays, when the canteen is closed.
Milstead is about 3 miles south of Sittingbourne, in Kent. Whatever kind of site you run in Milstead, TR19 inspection is something we can help with. We can work out of hours so trading is not interrupted. 922 places in Kent are on our list, from busy centres to quieter spots. We also work in Maidstone, about 9 miles from Milstead.
Here we cover the ME9 postcode area for TR19 inspection. TR19 inspection is available to premises on Frinsted Road, Manor Road and Horn Hill and the roads around them. Other places close to Milstead include Hollybushes (1 mile south-east), Bluetown (1 mile south-east), Frinsted (1 mile south-west), Wichling (2 miles south-east) and Doddington (2 miles south-east). Larger places within reach include Maidstone (9 miles west), Ashford (12 miles south-east), Canterbury (15 miles east), Sittingbourne (3 miles north), Whitstable (14 miles east) and Faversham (7 miles east).
Around Milstead
Around Milstead, our work takes us to kitchens and buildings near Cromers Wood and the streets around them. The nearest railway station is Sittingbourne station, about 3.2 miles north. Well-known places in the area include Sittingbourne Heritage Museum (3 miles north) and Newnham Castle (3.2 miles east).