Milton Keynes · TR19 inspections and grease testing

TR19 inspections in Lathbury

TR19 inspection for Lathbury and the surrounding area: diagnosis first, then a fixed quote, the work and a report with pictures. Call for a fixed quote.

  • Cleaning intervals that may not suit the kitchen
  • Parts of the system left out of past cleans
  • Surveys needed before quoting a full clean

TR19 inspection in Lathbury

TR19 inspection in Lathbury, done properly

Before any clean in Lathbury, we survey the canopy, plenum, filters, ducts, fan and discharge. Access is checked along the full length, and record grease readings at set points. The work covers pre-clean surveys, post-clean checks and insurer audits, and the jobs we see most are systems that need surveying before cleaning and post-clean verification after another contractor’s clean.

Work in a small place like Lathbury starts with a call to agree access and timings, and the clean itself is the same full TR19® job as in any town: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.

A written report with pictures follows every visit, so you have a record of what was done and when. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.

Where
Lathbury (MK16)
Region
Milton Keynes
Paperwork
Certificate plus before-and-after pictures
Price
A fixed quote up front
When we work
Evenings, overnight and weekends; 24/7 emergencies
Phone
0345 646 2711
Page updated
30 October 2026
Before and after view down the inside of a rectangular extract duct

TR19 inspection around Lathbury

Food Standards Agency records list about 25 cafés, restaurants and staff canteens and about 13 sandwich bars and takeaways in Lathbury and the streets around it, up to about 1.5 miles out. A WFTT or DTT reading tells each of those kitchens whether its grease is staying under the 200-micron mean. The fire and rescue service for Lathbury is Buckinghamshire Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order. Kitchens in Lathbury get their food hygiene inspections from Milton Keynes council. Extraction counts as kitchen equipment, so its condition can come up on the day. Our report lists what was cleaned and when, which is useful to have ready.

Bursars and site managers at schools such as Cedars Primary School tend to book extract cleaning for when the kitchen is empty. If you run catering at a healthcare site, such as a hospital like Milton Keynes University Hospital about 5 miles south, the extract may need cleaning more often than a part-time kitchen.

Lathbury is about 1 mile north of Newport Pagnell, in Milton Keynes. We provide TR19 inspection for commercial premises of every kind in Lathbury and the rest of Milton Keynes. Our area takes in 73 places across Milton Keynes, from busy centres to quieter spots.

All of MK16 is within our area for TR19 inspection, from busy streets to back roads. If you need TR19 inspection at premises on Northampton Road and Church Lane or a nearby road, we can help. Neighbouring places we cover for TR19 inspection include Newport Pagnell (1 mile south), Caldecote (2 miles south), Tongwell (2 miles south), Willen (2 miles south) and Great Linford (3 miles south-west). Further out, we also cover Milton Keynes (5 miles south-west), Bletchley (7 miles south), Bletchley and Fenny Stratford (7 miles south), Furzton (7 miles south), Whitehouse (6 miles south-west) and Middleton (4 miles south).

What’s near Lathbury

Around Lathbury, our work takes us to kitchens and buildings near Ousedale School and The Cannon Public House and the streets around them. The nearest railway station is Wolverton station, roughly 4.2 miles south-west of the centre. Well-known places in the area include Newport Pagnell Castle (0.7 miles south) and Milton Keynes University Hospital (5 miles south). The countryside around Lathbury includes Little Linford Wood and Tongwell Lake.

Map of Lathbury © OpenStreetMap contributors

How the visit works

At the end of the visit, someone from your team can look over the work with us. We point out anything that couldn’t be reached or needs a follow-up, and it goes on the report too. All told, the work takes around an hour or two per canopy and duct system. If the van will struggle with a lane or gateway near Lathbury, let us know and we’ll plan around it.

  1. First we look at the system’s cleaning history, if there is one.
  2. We follow the extract from canopy to discharge.
  3. We note where access panels are and where more are needed.
  4. Grease readings are taken and photos recorded.
  5. You get a report and a fixed quote for the clean.

Before we arrive

  • Tell us where we can park and unload
  • Move anything stored near the system
  • Mention any sign-in, permit or induction we need

How to get a quote

Want a quote for TR19 inspection? Please ring 0345 646 2711, or email photos with a few details about the site. We’ll talk you through the work and give you a fixed quote before you commit to anything.

Get a price

Related advice

Lathbury: your questions answered

Which council inspects kitchens in Lathbury?

In Lathbury, it’s Milton Keynes council that carries out food hygiene inspections. An officer may look up into the canopy, so clean filters on the day and a recent certificate on file both help.

Do you do school kitchen extract cleaning in Lathbury in the summer holidays?

Yes, and it’s the easiest time to do it. There are about 6 schools, colleges and universities on the FSA’s food hygiene register within about 1.5 miles of Lathbury. Booking early in the term gives the best choice of holiday dates.

What should I send you?

A short description and a few pictures plus the address and your hours. We’ll ask for anything else we need.

Do you work in Lathbury?

Yes. We work in Lathbury and across Milton Keynes, as part of our work across South East England and London. For a fixed quote, call us on 0345 646 2711 or drop us a line.

How much does TR19 inspection cost in Lathbury?

We do not publish prices, because the cost depends on the job: how big it is, what state it’s in, how we reach it and the working hours. We fix the price before work begins.

How do you measure grease in a kitchen extract?

The Wet Film Thickness Test (WFTT) and Deposit Thickness Test (DTT) measure how thick the grease is at a given point. We take readings at set points from canopy to fan.

What types of premises do you cover?

Any site with a kitchen or a ventilation system to look after, from a small pub to a hospital. We work with hotels, schools, care homes, offices, retail and leisure sites.

Where does the waste go?

Anything we remove is contained as we work and taken away with us, from grease and debris to used cleaning water. We do not leave it behind.

What we are called out for in Lathbury

Looking at a canopy tells you little about what’s in the duct. Clean filters can hide a heavy layer behind them, so readings are the reliable guide.

Common reasons sites call us are:

  • Kitchen extract systems with no recent grease readings
  • Pre-clean surveys before a first TR19 clean
  • Missing access panels found on survey
  • Uncertainty over how often to clean

Church and community hall kitchens, near Church of All Saints or anywhere around Lathbury, are easy to forget, but their extracts collect grease like any other.

Comparing quotes

  • How VAT is shown on the quote
  • Whether a survey comes first
  • Whether they recommend a next date
  • What happens if part of the system can’t be accessed

Our hiring checklist

Keeping the system healthy

Results last longer with the right care. We suggest:

  • Store grease readings where your insurer can see them
  • Report grease dripping from the canopy
  • Flag changes in how much frying the kitchen does
  • Share inspection reports with your insurer or broker when asked

Where sections couldn’t be reached, the report says where access panels would help. Fitting them before the next clean means the whole system gets done.

Fit access panels where the survey finds sections can’t be reached, so every part of the duct can be cleaned.

What affects the cost of TR19 inspection

You’ll get a fixed price before work begins. It takes into account:

  • Parking and loading at the site
  • The size of the system
  • When the work can happen, such as evenings, overnight or weekends
  • A single visit or a regular plan

Every site is different, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all make a difference.

What we need to know

To speed up the quote, please include:

  • The roof, plant room or outside wall the system runs to
  • Wide photos of the system and the area around it
  • Where the site is and what kind of site it is
  • Detail shots of panels, filters and grilles

To get a fixed quote, phone us on 0345 646 2711 or use the quote form and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. You’ll typically have a quote within one working day.

In-house cleaning or a specialist?

Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.

Staff cleaning and specialist work are not the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.

For landlords and multi-site operators

We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.

Whether it’s one building or many, the standard is the same: diagnosis, a fixed price, work booked around your hours and a written report with photos.

Honest limits

In fairness, some problems need a different fix:

  • The responsible person’s own fire risk assessment
  • A faulty or failing extract fan
  • Parts of the duct nobody can reach yet

Not sure which it is? You can call us on 0345 646 2711 or use the quote form and we’ll tell you honestly before booking.

Parts of the system we cover

  • Wet film thickness tests
  • Pre-clean surveys
  • Deposit thickness tests
  • Insurer audits
  • Post-clean checks
  • Access surveys
BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London