Milton Keynes · TR19 inspections and grease testing
TR19 inspections and grease testing in Furzton, Milton Keynes
TR19 inspections, grease thickness testing, pre-clean surveys and post-clean verification for Furzton, with a survey first and a report with pictures at the end. Call for a fixed quote.
- Heavy grease suspected in the plenum or ducts
- Kitchens taken over with no cleaning records
- Missing access panels found on survey
TR19 inspection in Furzton
TR19® Grease says grease should not exceed a mean of 200 microns between cleans, and 500 microns or more at any point needs immediate spot cleaning. Testing is how you know where your system stands. The work covers deposit thickness tests, access surveys and pre-clean surveys, and the jobs we see most are insurers asking for TR19 evidence and uncertainty over how often to clean.
Kitchens around a place like Furzton are often in older buildings or single-storey extensions, with the duct running through a roof space or up an outside wall. Flat runs collect grease and need proper access to clean.
Insurers, fire officers and environmental health officers all look at records. So every job comes with a written report and photos, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Where
- Furzton (MK3, MK4)
- Wider area
- Milton Keynes
- Records
- TR19® certificate and photo report
- Price
- A fixed price before we start
- When we work
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
When to call us in Furzton
Grease in a duct is flammable fuel. Flames from the range can be pulled into the canopy and travel through the ducts to other parts of the building. Measuring it is the first step to keeping it under control.
Clients usually contact us after spotting something like this:
- Sections of duct that cannot be reached
- Heavy grease suspected in the plenum or ducts
- Uncertainty over how often to clean
- Kitchen extract systems with no recent grease readings
If you look after a school kitchen, at a school such as Barleyhurst Park Primary or anywhere near Furzton, the holidays are the usual time for a TR19® clean.
Comparing quotes
- What insurance they carry
- How areas they can’t reach will be recorded
- How they set the interval to the next visit
- What’s included in the scope, part by part
TR19 inspection around Furzton
Look up Furzton on the FSA’s food hygiene register and you will find about 55 restaurants, cafés and canteens and about 32 takeaways and sandwich shops within 1.5 miles or so of the middle of Furzton. Each kitchen extract among them can be measured for grease to set the right cleaning interval. Kitchens in Furzton get their food hygiene inspections from Milton Keynes council. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. A TR19® certificate and photo report after each clean gives you a record to show an inspector. Fire safety in Furzton falls to Buckinghamshire Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order.
Where a hall near Church of the Servant King, or anywhere in Furzton, hosts lunch clubs or events, its extract gathers grease just as a café’s does. If you run catering at a historic house or estate in the area (Bletchley Park is about 1.1 miles south-east), event kitchens in older buildings often have awkward duct runs that need planning.
Furzton is about 1 mile north-west of Bletchley, in Milton Keynes. Sites in Furzton get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with photos. Our Milton Keynes coverage runs to 73 places, and Furzton is one of them.
Here we cover the MK3 and MK4 postcode area for TR19 inspection. Whether your site is on Tay Road, Trent Road and Hodder Lane or anywhere close by, we can help. With the A421 close by, Furzton is simple for us to get to for TR19 inspection. Neighbouring places we cover for TR19 inspection include Denbigh (1 mile east), Westcroft (1 mile west), Shenley Church End (2 miles north-west), Loughton (2 miles north) and Woughton on the Green (2 miles north-east). We also work in nearby towns such as Newport Pagnell (6 miles north), Whitehouse (3 miles north-west), Middleton (4 miles north-east), Olney (11 miles north), Broughton (4 miles north-east) and Kingston (4 miles north-east). As one of the bigger places in Milton Keynes, Furzton has commercial sites of every size, all within our area for TR19 inspection.
Near you in Furzton
Locally, jobs take us to businesses close to Lord Grey School, Dolphin pub and South Loughton Valley park. For rail, the closest station is Bletchley station, about 1.4 miles south-east. Nearby you’ll also find Hangmans Hill (2.7 miles south) and Central Milton Keynes Shopping Centre (2.7 miles north). The countryside around Furzton includes Furzton Lake and Blue Lagoon Park.
Furzton questions
Can you work in Furzton outside opening hours?
Yes. We work evenings, overnight and at weekends. That way a site in Furzton does not have to lose a day’s trading. Just call us on 0345 646 2711 or send us an email with your opening times and we will plan around them.
Can you get to a site in Furzton?
Yes, Furzton is part of our area, however small the site. The journey is planned ahead, so a few details about the route help.
What is a WFTT or DTT grease test?
It’s a measurement of how much grease is coating the inside of the extract, using the Wet Film Thickness Test (WFTT) or Deposit Thickness Test (DTT). Each reading is recorded in microns.
Why survey before a clean?
We look at the system from canopy to discharge, take grease readings and check access. From it, we plan the clean and quote a fixed price.
Can you price the work without visiting?
In many cases, yes. With good photos, the site type and your last report, we can price many jobs. Larger or hidden systems need a survey on site first.
Can you verify a clean after it’s been done?
Post-clean verification is a check after a clean, with fresh grease readings and pictures. It works whoever carried out the clean.
How much time does an inspection need?
Testing takes around an hour or two per canopy and duct system. Large or multiple systems take longer, so call 0345 646 2711 or email us and we’ll plan it.
Is TR19 a legal requirement?
No. TR19® is not law; it’s BESA’s specification. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005, which requires the responsible person to reduce fire risk, and TR19® is what insurers and fire officers look to.
What a clean won’t put right
Before you book, it helps to know what’s not included:
- Heavy deposits found on test, which still need cleaning
- Installation problems, which fall under design guidance such as DW172
- The responsible person’s own fire risk assessment
If you’re not sure, just give us a ring on 0345 646 2711, or send details by email and we will give you a straight answer.
Where we work
- Access surveys
- Wet film thickness tests
- Deposit thickness tests
- Pre-clean surveys
- Insurer audits
- Post-clean checks
Staff cleaning versus specialist work
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, they should report it rather than try to fix it. We can diagnose it and quote.
What affects the cost of TR19 inspection
Sites vary more than people expect. What affects the quote:
- How big the system is
- The condition of the system
- Parking and loading at the site
- The number of sites or systems
When the work has to happen, how we reach it and how big the site is can all change the price. We take each of them into account and give you a fixed price before we start.
What to send for a quote
You do not need the technical terms. Just send:
- Any previous report or certificate
- Detail shots of panels, filters and grilles
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- The site address and the type of premises
Want a quote for TR19 inspection? Please phone us on 0345 646 2711 or email us and tell us about the site. We’ll talk you through the work and give you a fixed quote before you commit to anything.
How the job changes from site to site
Horizontal duct runs
Grease settles on the floor of horizontal ducts as the air cools. Readings are taken along each run through its access panels.
Canopy and plenum
Behind the filters, the plenum catches plenty of grease. We take readings there and photograph it on every inspection.
How it works
Our technicians bring everything the work needs, including protection sheets, the right tools and access kit. You only need to give us clear access and switch off what needs to be off. On site, the work takes an hour or two for a single kitchen, longer for a large or complex system. In a smaller place like Furzton, parking is rarely the issue, but tell us about gates, roof access and opening hours.
- After the clean, we arrange a time to check the system.
- The same access points are opened up.
- Grease readings are taken again at set points.
- We photograph each area to record how it was left.
- We report the findings and flag any areas that need more work.
Before we arrive
- Make sure someone can let us in and lock up afterwards
- Tell us where we can park and unload
- Move anything stored near the system
Getting a quote
To help us quote: where the site is, what it is and its opening hours, a few photos and any previous report or certificate. Once you have those, phone us on 0345 646 2711 or drop us a line.
Advice
Aftercare tips
Good habits slow the build-up between visits. A few tips:
- Keep the route to access panels clear
- Clean or swap grease filters as often as the kitchen needs
- Mention new equipment or longer hours at the next test
- Wipe the canopy surfaces regularly
The report recommends when the system should next be cleaned and tested, from the measured grease and the kitchen’s hours.
Close the access gaps found during inspection, so every part of the duct can be cleaned.