Kent · TR19 inspections and grease testing
TR19 inspections in Kilndown
Our technicians work in Kilndown on TR19 inspections and grease testing. Fixed quotes, work around your opening hours and photo reports as standard.
- Ductwork where grease may be over the TR19 limits
- Kitchens taken over with no cleaning records
- Checking the result of a recent clean
About our TR19 inspection in Kilndown
BESA’s minimum cleaning frequencies depend on how long the kitchen cooks each day: every 3 months for heavy use of 12 to 16 hours a day, every 6 months for moderate use of 6 to 12 hours, and every 12 months for light use of 2 to 6 hours. Grease testing shows whether your kitchen needs cleaning more often than that. The work covers pre-clean surveys, post-clean checks and wet film thickness tests, and people most often call us about insurers asking for TR19 evidence and kitchens taken over with no cleaning records.
In a village or hamlet like Kilndown, the kitchens that need extract cleaning are usually a pub, a school, a care home or a hall kitchen, wherever there is one. Every one of them still needs its extract kept clear of grease.
We’ve been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we carry full insurance.
- Where
- Kilndown (TN17)
- Region
- Kent
- Reporting
- Certificate and photo report
- Quote
- A fixed quote up front
- When we work
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026

Common questions in Kilndown
Can you come to Kilndown after we close?
Yes, we can come after you close and finish before you open. That way a site in Kilndown doesn’t have to lose a day’s trading. Let us know the hours you’re closed and we’ll book within them.
Who inspects food businesses in Kilndown?
Food hygiene inspections in Kilndown are carried out by Tunbridge Wells council. Have your latest TR19® certificate and photo report to hand, as an officer may ask how the extract is maintained.
Can you come out in an emergency?
Yes, 24/7. Our office is open from 8am to 6pm on weekdays, and the emergency line covers the rest.
What happens if you can’t reach some of it?
They’re marked on the report. In ductwork, new access panels are often the answer, which we can install.
How much does TR19 inspection cost in Kilndown?
The cost depends on the size of the system, its condition, access and timing. Ask us for a fixed quote and we’ll typically reply within one working day.
How much notice do you need?
It depends on the time you need and how big the job is. Mention your preferred dates with your enquiry, and for anything urgent, ring our 24/7 emergency line.
What accreditations do you have?
Duct Doctor is a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we carry full insurance.
At what point does grease need cleaning?
Under TR19® Grease, the mean thickness should not exceed 200 microns between cleans. 500 microns or more at any point calls for immediate spot cleaning.
Staff cleaning versus specialist work
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. The inside of ducts and units needs a specialist.
If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Landlords, agents and facilities managers
Managing agents often deal with us directly. Send the address, what’s needed and how access works and we’ll come back with a fixed quote.
Multi-site operators often want one contractor and one number. We cover South East England and London, so a run of sites can go into one programme and kept to a regular schedule.
When to call us in Kilndown
Grease builds up as cooking vapour cools inside the extract. It often collects where nobody can see it: the plenum, bends and horizontal runs.
Keep an eye out for these warning signs:
- Missing TR19 certificates or history
- Pre-clean surveys before a first TR19 clean
- Checking the result of a recent clean
- Uncertainty over how often to clean
Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Scotney Castle is about 0.8 miles west), access may need planning.
Before booking anyone
- If the quote is a fixed price or an estimate
- Proof of insurance
- When the next visit should be, and why
- What happens if part of the system can’t be accessed
Kilndown kitchens: local notes
Food Standards Agency records list about 3 restaurants, cafés and canteens within about 1.5 miles of central Kilndown. Where they cook under a canopy, a grease reading is the way to tell whether the extract is due a clean. Environmental health officers from Tunbridge Wells council inspect food businesses in Kilndown. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. A dated certificate in the maintenance file answers the question before it’s asked. Fire safety in Kilndown falls to Kent Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract.
A hospital like Ticehurst House Hospital, about 3 miles south-west, is the kind of site where a kitchen may cook for patients, staff and visitors all day. If you run a church or community hall kitchen, near Christ Church or elsewhere in Kilndown, its extract still collects grease from every lunch and event.
Kilndown is about 8 miles south-east of Royal Tunbridge Wells, in Kent. Kilndown gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with pictures. Our Kent coverage runs to 922 places, and Kilndown is one of them. For sites nearby, see our Maidstone page (13 miles or so).
Here we cover the TN17 postcode area for TR19 inspection. We cover sites on Church Road, Beresford Close and Chicks Lane and nearby roads. We also cover the places around Kilndown: Riseden (1 mile north-east), Bedgebury Cross (1 mile east), Stonecrouch (1 mile south), Three Leg Cross (2 miles south) and Flimwell (3 miles south). Further out, we also cover Maidstone (13 miles north), Royal Tunbridge Wells (8 miles north-west), Tonbridge (10 miles north-west), Kings Hill (13 miles north), Foley Park (14 miles north) and Paddock Wood (6 miles north).
Local landmarks in Kilndown
A little further out are Finchcocks Musical Museum (1 mile north) and Old Scotney Castle (0.6 miles west). Green spaces nearby include Bewl Water.
Also near Kilndown
Other services in Kilndown
Fixed quotes for TR19 inspection in Kilndown
The quote reflects the site in front of us. We take into account:
- The size of the system
- Whether we need access equipment or extra panels
- Site requirements such as sign-in and permits
- One-off work versus a regular cycle
Combining work into one visit or one programme often makes better use of the time. Mention every system or site you need covered, and you will get one fixed quote.
What to send for a quote
Photos and a few facts are often enough to price the work. Useful things to send:
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Any previous report or certificate
- Any access panels or hatches you can see
- The times we could work without disrupting the site
Need a price for TR19 inspection? Please call 0345 646 2711 or send us an email with a few details about the site. We’ll talk you through the work and give you a fixed quote before anything is booked.
Honest limits
In fairness, there are a few things this work will not fix:
- The responsible person’s own fire risk assessment
- Ductwork that was designed or installed badly
- A faulty or failing extract fan
Not sure which it is? You can call us on 0345 646 2711 or use the quote form and we’ll tell you honestly before booking.
What the work covers
- Post-clean checks
- Access surveys
- Insurer audits
- Deposit thickness tests
- Pre-clean surveys
- Wet film thickness tests
Different parts, different methods
Canopy and plenum
Behind the filters, the plenum catches plenty of grease. Readings and photos are taken in the plenum as part of every survey.
Restaurants, pubs and hotels
Inspections are done when the kitchen is closed or quiet so the kitchen keeps cooking.
The process
Before we leave, we walk the area with whoever is on site. We point out anything that couldn’t be reached or needs a follow-up, and the same goes into the written report. The visit takes an hour or two for a single kitchen, longer for a large or complex system. Somewhere as small as Kilndown, the date and timings are agreed with you well before the day.
- After the clean, we arrange a time to check the system.
- We open the access points used on the clean.
- We repeat the WFTT or DTT readings.
- We photograph each area to record how it was left.
- We report the findings and flag any areas that need more work.
Getting ready for the visit
- Mention any locked doors, roof access or ceiling voids
- Dig out any earlier paperwork for the system
- Clear loose items from the work area
How to get a quote
To help us quote: the address, the type of site and when it’s open, a few photos and the last certificate or report, if there is one. Once you have those, call us on 0345 646 2711, or send details by email.