Kent · TR19 inspections and grease testing

TR19 inspections in Hazel Street

TR19 inspection across Hazel Street and nearby, booked around your opening hours and signed off in writing with pictures.

  • Systems that need surveying before cleaning
  • Ductwork where grease may be over the TR19 limits
  • Post-clean verification after another contractor’s clean

TR19 inspection across Hazel Street

What TR19 inspection can’t fix

We’ll always give you a straight diagnosis, so here’s what this work can’t put right:

  • Ductwork that was designed or installed badly
  • Removing the grease, which is a separate clean
  • Sections with no access, until panels are fitted

Not sure which it is? You can call 0345 646 2711 or send us an email and we will tell you honestly.

What the work covers

  • Pre-clean surveys
  • Deposit thickness tests
  • Wet film thickness tests
  • Access surveys
  • Post-clean checks
  • Insurer audits

TR19 inspection in Hazel Street, done properly

Grease thickness testing tells you how much grease is sitting in the canopy, ducts and fan. Readings are taken at set points using the Wet Film Thickness Test (WFTT) or the Deposit Thickness Test (DTT). From the numbers, you can see whether cleaning is due. If you have insurance renewals needing proof of TR19 cleaning and extracts that have never been grease tested, we can help.

Work in a small place like Hazel Street starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy to discharge, then a TR19® certificate and a photo report.

It’s worth checking any contractor’s accreditations. Ours are BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001, and we are fully insured.

Place
Hazel Street (TN12)
Wider area
Kent
Paperwork
TR19® certificate and photo report
Quote
Fixed quote, typically within a working day
When we work
Out of hours as standard, 24/7 emergency line
Call
0345 646 2711
Page updated
30 October 2026
Extract duct interior shown dirty and then cleaned back to bare metal

Hazel Street questions

Do you work in villages like Hazel Street?

Yes, we work in villages as well as towns, and Hazel Street is covered. A survey first, from pictures or a visit, means we arrive with the right kit.

Who is the fire and rescue service for Hazel Street?

Hazel Street is in the area of Kent Fire and Rescue Service. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.

What happens to the waste?

We take it away when we go. While we work, it’s kept contained to keep the area clean.

Can you price the work without visiting?

Often, yes. Photos of the system and the access, plus your opening hours and last report, are often enough. Where we cannot see enough, we arrange a survey.

How long does grease testing take?

Expect it to take anything from an hour for a small canopy and short duct to a good part of a day for a large site. We fit it around when the kitchen is closed or quiet.

Do you check other contractors’ cleans?

A post-clean check records grease readings and photos after the work, for our cleans and other firms’ alike.

What is grease thickness testing?

The Wet Film Thickness Test (WFTT) and Deposit Thickness Test (DTT) measure how thick the grease is at a given point. Readings are taken at set points through the system.

How far ahead should we book?

It depends on the time you need and how big the job is. Tell us your preferred dates when you ask for a quote, and if it’s an emergency, call us any time.

Looking after it afterwards

Here’s the after-treatment advice, in brief:

  • Clean grease off the canopy between professional cleans
  • Keep TR19 certificates, readings and reports together
  • Report grease dripping from the canopy
  • Mention new equipment or longer hours at the next test

After the inspection, we send a report showing each reading, its location and pictures. Keep it with your fire safety and TR19 records.

Fit access panels where the survey finds sections can’t be reached, so every part of the duct can be cleaned.

How the visit works

Everything the job needs comes with us, including protection sheets, the right tools and access kit. All we need from you is clear access and the right equipment switched off. On site, the work takes a couple of hours for a typical kitchen extract system. Seeing the system in photos first means the trip to Hazel Street can be planned properly.

  1. First we look at the system’s cleaning history, if there is one.
  2. We follow the extract from canopy to discharge.
  3. We note where access panels are and where more are needed.
  4. We measure the grease and photograph each point.
  5. You get a report and a fixed quote for the clean.

How to prepare

  • Let us know about permits to work or site inductions
  • Mention any locked doors, roof access or ceiling voids
  • Agree a time when the area can be out of use

Getting a quote

Every quote begins with a look at the system, either from pictures and details you send or from a site visit. After that, you get a fixed price for the work so you know the cost before we start.

Get a quick quote

Advice

Different parts, different methods

Extract fan and discharge

A greasy fan works harder and wears faster. Readings show if it needs attention before the next clean.

Vertical risers

In buildings with several floors, the riser may pass through other tenants’ space, so we arrange access ahead of time.

Do you need TR19 inspection in Hazel Street?

Records can go missing when a business changes hands or contractors. With no history, the current state of the extract is a guess.

Look out for any of the following:

  • Sites with gaps in their extract records
  • Surveys needed before quoting a full clean
  • Uncertainty over how often to clean
  • Post-clean verification after another contractor’s clean

Volunteers running a hall kitchen near Church of St Margaret, or anywhere in Hazel Street, may not know when the extract was last cleaned, and a grease test settles it.

Questions to ask before booking

  • Whether a written report and photos are included
  • Whether the whole system is included, or only the parts that are easy to reach
  • If the quote is a fixed price or an estimate
  • How VAT is shown on the quote

Our hiring checklist

What happens if it’s left?

Without readings, you’re guessing when to clean. If grease reaches 500 microns anywhere, TR19® Grease calls for immediate spot cleaning, which you won’t know without measuring. In a small place like Hazel Street, a system that fails can take a site out of use.

Putting the work off seldom saves money. Problems in a system tend to grow, which can make the next visit longer. If you’re not sure what’s needed, call 0345 646 2711, or email photos for straight advice and a fixed quote.

Why Hazel Street businesses choose us

  • CHAS, SafeContractor and ISO 9001
  • Full insurance on every job
  • Out-of-hours work and a 24/7 emergency line
  • In business since 2009

See what affects the cost or how to check a contractor.

TR19 inspection around Hazel Street

There are about 3 restaurants, cafés and canteens within roughly a mile and a half of the centre of Hazel Street, according to the Food Standards Agency’s register. Kitchens like these cook for very different hours, and grease testing shows which extracts need cleaning soonest. Hazel Street sits within the area of Kent Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk. It’s Tunbridge Wells council that sends environmental health officers to food businesses in Hazel Street. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Our report lists what was cleaned and when, which is useful to have ready.

If your kitchen is in a listed or historic building, like the houses around Hazel Street (Scotney Castle is about 2.7 miles south), fitting access panels needs care. If you run catering at a healthcare site, such as a hospital like Tunbridge Wells Hospital about 5.1 miles west, the extract may need cleaning more often than a part-time kitchen.

Hazel Street is about 7 miles east of Royal Tunbridge Wells, in Kent. Anywhere in TN12, we cover TR19 inspection for commercial sites. We cover 922 places across Kent, from busy centres to quieter spots. You can also see our page for Maidstone, roughly 10 miles from Hazel Street.

Here we cover the TN12 postcode area for TR19 inspection. That includes premises on Lamberhurst Road and Spelmonden Road and nearby roads. Nearby, we also carry out TR19 inspection in Horsmonden (1 mile north-east), Smallbridge (1 mile south-east), Capel Cross (1 mile east), Broad Ford (1 mile east) and Palmer's Green (2 miles north). We also work in nearby towns such as Maidstone (10 miles north-east), Sevenoaks (15 miles north-west), Royal Tunbridge Wells (7 miles west), Tonbridge (8 miles north-west), Kings Hill (10 miles north) and Foley Park (11 miles north-east).

Local landmarks in Hazel Street

In Hazel Street, that means kitchens and buildings near The Gun And Spitroast Public House And Rear Courtyard. Hazel Street’s nearest station is Paddock Wood station, about 3.9 miles north. A little further out are Old Scotney Castle (2.7 miles south) and Tunbridge Wells Hospital (5.1 miles west). Green spaces nearby include Bewl Water.

Map of Hazel Street © OpenStreetMap contributors

Managing agents and facilities teams in Hazel Street

Where a tenant occupies the premises but the landlord owns the building, it’s worth checking the lease for who maintains the systems. We can quote either party, and the report can go to both.

Facilities teams in offices, schools and healthcare sites book us too across Kent. Work can be phased by floor, building or site to keep disruption down.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London