Essex · TR19 inspections and grease testing
Havering-atte-Bower TR19 inspection
Specialist TR19 inspection for Havering-atte-Bower: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- Heavy grease suspected in the plenum or ducts
- Insurance renewals needing proof of TR19 cleaning
- Systems cleaned on a calendar with no measurements
What your team can do, and what needs us
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, and that is where we come in.
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We can diagnose it and quote.
About our TR19 inspection in Havering-atte-Bower
After a clean, post-clean verification checks the result, with new readings and photos of the cleaned areas. It gives you evidence of how the system was actually left. The work covers insurer audits, pre-clean surveys and post-clean checks, and the jobs we see most are sections of duct that can’t be reached and an insurer’s request for a TR19 audit.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, where grease settles in the flat sections. We agree access and timings in advance.
The sign-off is always in writing: a written report, dated and illustrated with pictures, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. Any parts we couldn’t reach are recorded on it too.
- Where
- Havering-atte-Bower (RM4)
- Wider area
- Essex
- Reporting
- TR19® certificate and photo report
- Price
- A fixed quote up front
- When we work
- Overnight and weekend work, 24/7 emergency callout
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
How the job changes from site to site
Vertical risers
Risers carry the extract up through the building. Grease can run down and collect at the base, so the base is a key test point.
Extract fan and discharge
Grease builds up on the fan blades and inside the housing. We check and test them as part of the inspection.
What a clean will not put right
Not every problem is solved by TR19 inspection, and we’ll tell you before we start. It doesn’t solve:
- Installation problems, which fall under design guidance such as DW172
- A faulty or failing extract fan
- Fire safety duties beyond the extract system
If in doubt, phone us on 0345 646 2711 or email us and we’ll say what we think before you book.
What we work on in Havering-atte-Bower
- Pre-clean surveys
- Deposit thickness tests
- Post-clean checks
- Access surveys
- Wet film thickness tests
- Insurer audits
What TR19 inspection looks like in Havering-atte-Bower
There are about 13 restaurants, cafés and canteens in and around Havering-atte-Bower, up to about a mile and a half out, according to the Food Standards Agency’s register. Where they cook under a canopy, a grease reading is the way to tell whether the extract is due a clean. Havering-atte-Bower is covered by Essex County Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk. It’s Havering council that sends environmental health officers to food businesses in Havering-atte-Bower. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. Before-and-after photos from each clean are a simple way to show the extract is in hand.
If you run catering at a healthcare site, such as a hospital like Harold Wood Hospital about 2.5 miles south-east, the extract may need cleaning more often than a part-time kitchen. School kitchens, at schools like Dame Tipping Church of England Primary School for example, are usually cleaned in the holidays so no lunches are lost.
Havering-atte-Bower is about 3 miles north-west of Harold Wood, in Essex. Anywhere in RM4, we can take on TR19 inspection. Havering-atte-Bower is one of 644 places in Essex where we work for TR19 inspection. You can also see our page for London, roughly 15 miles from Havering-atte-Bower.
Work in RM4 is surveyed, quoted and booked the same way as anywhere else. That includes premises on North Road, Broxhill Road and Bower Farm Road and the roads around them. If your site is just outside Havering-atte-Bower, we cover Chase Cross (1 mile south-west), Stapleford Abbotts (1 mile north-west), Redbridge (2 miles west), Lambourne End (2 miles west) and Lambourne (3 miles north-west). We also work in nearby towns such as Chelmsford (15 miles north-east), Basildon (12 miles east), Harlow (11 miles north), Brentwood (5 miles east), Billericay (10 miles east) and Loughton (6 miles west).
Local landmarks in Havering-atte-Bower
We work in commercial kitchens and buildings around Bower Park Academy, The Top Oak pub and Havering Country Park and the streets around them. For rail, the closest station is Harold Wood station, about 2.7 miles south-east. Other landmarks nearby include Harold Wood Hospital (2.5 miles south-east) and Romford Shopping Hall (2.8 miles south). Green spaces nearby include Bedfords Park.
Signs you need TR19 inspection in Havering-atte-Bower
Grease builds up as cooking vapour cools inside the extract. It often collects where nobody can see it: the plenum, bends and horizontal runs.
Clients typically contact us after spotting something like this:
- Cleaning intervals that may not suit the kitchen
- Extracts that may be over the 200 micron mean
- Pre-clean surveys before a first TR19 clean
- Kitchen extract systems with no recent grease readings
Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Hare Hall is about 2.6 miles south), access may need planning.
What your quote should include
- How they set the interval to the next visit
- If they look at the system before pricing
- Exactly which parts of the system are covered
- What hours they’ll be on site
Places near Havering-atte-Bower
More services for Havering-atte-Bower
What happens on the day
Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. When the team arrives, the work area is protected and the relevant equipment is switched off to cool, and the job takes an hour or two for a single kitchen, longer for a large or complex system. Somewhere as small as Havering-atte-Bower, the date and timings are agreed with you well before the day.
- The visit is arranged for when the kitchen is not busy.
- Every part of the system is examined, end to end.
- We take WFTT or DTT readings at set points along the system.
- We photograph the test points and record any sections we can’t reach.
- We send a report setting out the readings, photos and next steps.
Before we arrive
- Let us know how we reach the system, including roofs, risers and plant rooms
- Allow time for equipment near the work to be turned off and cool down
- Arrange a key holder or contact on site
How to get a quote
Quotes are quick. Call or email with a few details and you will usually have a fixed price within one working day. If we need to see the system first, we book a survey around your hours.
Advice
Fixed quotes for TR19 inspection in Havering-atte-Bower
Some jobs are bigger than they look, and some smaller. What affects the quote:
- How many systems or sites are involved
- Whether we need access equipment or extra panels
- Travel, parking and unloading
- The size of the system
What you pay depends on how big the system is, the condition it’s in and how easy it is to reach. We give you a fixed price before we start, so there are no surprises.
Helping us quote
A few details help us quote accurately. With your enquiry, please include:
- The paperwork from the last visit, if you have it
- Any access panels or hatches you can see
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Any symptoms, from odd noises to smells or leaks
We don’t publish a price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, then send a fixed quote. To get going, ring 0345 646 2711 or email us.
Questions from Havering-atte-Bower
Which fire authority looks after Havering-atte-Bower?
It’s Essex County Fire and Rescue Service, which covers Havering-atte-Bower. A recent cleaning certificate and a note of the next clean date show that grease in the extract is being managed.
Can a school canteen extract in Havering-atte-Bower be done out of term time?
Yes, out-of-term visits are normal for schools. Food Standards Agency records list about 4 schools, colleges and universities with registered kitchens within about a mile and a half of Havering-atte-Bower. Just ring 0345 646 2711 or email us with your term dates and we’ll plan around them.
Is there a survey before the work?
Yes, every time. We diagnose before we treat: the survey tells us what the system needs and how to reach it, and the quote is based on that.
Can you look after several sites?
Yes. Send the list of sites and the work at each and you’ll get one fixed quote.
What is post-clean verification?
Verification means repeat readings and pictures once the clean is done. The report flags anything missed.
Is TR19 a legal requirement?
No, not in itself. The Fire Safety Order 2005 still requires the responsible person to manage fire risk, which in a kitchen includes grease in the extract. Many insurance policies also require TR19 adherence.
Do you offer maintenance contracts?
Yes, of course. Tell us what you have and how it’s used, and we will suggest a schedule and quote for it.
What should I send you?
The site address, the type of premises and your opening hours, plus photos of the system and your last certificate or report if you have one.
Between visits
Here’s the after-treatment advice, short and simple:
- Flag oily drips near the extract
- Share inspection reports with your insurer or broker when asked
- Keep the route to access panels clear
- Mention new equipment or longer hours at the next test
After the inspection, we send a report showing each reading, its location and pictures. File it alongside your TR19 certificates.
Keep filters clean and in place. Missing or damaged filters let grease straight into the plenum.