West Berkshire · TR19 inspections and grease testing
TR19 inspections in Halfway
One call covers TR19 inspections and grease testing in Halfway, from survey to sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Surveys needed before quoting a full clean
- Missing TR19 certificates or history
- Sections of duct that can’t be reached
About our TR19 inspection in Halfway
Post-clean verification is a check carried out once the cleaning is done, with new readings and photos of the cleaned areas. It gives you evidence of how the system was actually left. The work covers insurer audits, post-clean checks and access surveys, and common reasons people get in touch are parts of the system left out of past cleans and ductwork where grease may be over the TR19 limits.
In a small place like Halfway, kitchens are often in older or extended buildings, with long single-storey duct runs, where grease settles in the flat sections. We agree access and timings in advance.
Good records are part of the job. You get a written report with pictures after each visit, listing what was done, anything we couldn’t reach and when the next visit is due. File it in your maintenance log so it’s to hand when an insurer or inspector asks.
- Where
- Halfway (RG20)
- Wider area
- West Berkshire
- Records
- Certificate and photo report
- Quotes
- A fixed price before any work starts
- When we work
- Nights, weekends or holidays to suit you
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
TR19 inspection around Halfway
Halfway is about 57 miles from central London, well within the area we cover across London and the South East. A survey and a fixed quote come first, then the visit at a time that suits you. Royal Berkshire Fire and Rescue Service covers Halfway. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Benham Park is about 1.9 miles east), access may need planning. Where a hall near Church of St Mary, or anywhere in Halfway, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
Halfway is about 4 miles west of Newbury, in West Berkshire. Sites in Halfway get the same service as everywhere we cover: diagnosis first, a fixed price, out-of-hours working where necessary and a written report with pictures. Our West Berkshire coverage runs to 155 places, Halfway among them. For sites nearby, see our Reading page, about 19 miles away.
Work in RG20 follows the same survey, fixed quote and written report as everywhere else we cover. Main roads around Halfway include the A4, so getting to you is simple for evening and night visits. Close by, we work in Clapton (2 miles north-west), Wickham (2 miles north), Easton (2 miles north), Upper Denford (3 miles west) and Lower Denford (4 miles west). Further out, we also cover Newbury (4 miles east), Thatcham (7 miles east), Burghfield Common (15 miles east), Speenhamland (4 miles east), Hungerford (5 miles west) and Lambourn (8 miles north-west).
Near you in Halfway
Locally, jobs take us to businesses close to The Halfway pub and Hamstead Marshall Park, among other places. Halfway’s nearest station is Kintbury station, roughly 1.6 miles south-west of the centre. Other landmarks nearby include British Balloon Museum & Library Ltd (3.9 miles east) and Hamstead Marshall 3 (1.1 miles south-east). For a walk, there’s Sole Common Pond.
How we price TR19 inspection
Every site gets its own quote. This is what makes a difference:
- Whether we need access equipment or extra panels
- How many systems or sites are involved
- Site rules, permits and inductions
- The condition we find in the survey
The cost depends on how big the system is, what state it’s in and how easy it is to reach. We give you a fixed price before any work starts, so you know where you stand.
Asking for a quote
You don’t need the technical terms. Just send:
- The roof, plant room or outside wall the system runs to
- Any symptoms, from odd noises to smells or leaks
- Any previous report or certificate
- The times we could work without disrupting the site
To help us quote: where the site is, what it is and its opening hours, a few pictures and any previous report or certificate. Then call us on 0345 646 2711 or send us an email.
Nearby places to Halfway
What else we do in Halfway
Honest limits
A few issues sit outside what this work can do:
- Mechanical faults in the extract
- The legal duty, which stays with the responsible person
- Design faults in the extract system
Not sure which it is? You can give us a ring on 0345 646 2711 or email us and we will tell you honestly.
Where we work
- Pre-clean surveys
- Insurer audits
- Access surveys
- Wet film thickness tests
- Post-clean checks
- Deposit thickness tests
Do you need TR19 inspection in Halfway?
As hot, greasy air travels up the duct, it cools and leaves a film behind. The thickest layers can sit out of sight in the plenum, at bends and along flat runs.
Any of these means the system needs a check-up:
- Post-clean verification after another contractor’s clean
- Surveys needed before quoting a full clean
- Insurance renewals needing proof of TR19 cleaning
- Heavy grease suspected in the plenum or ducts
A hospital like West Berkshire Community Hospital, about 5.2 miles east, is the kind of site where a kitchen may cook for patients, staff and visitors all day.
What to look for in a quote
- Proof of insurance
- What records you’ll receive afterwards
- What happens if part of the system cannot be accessed
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
FAQs for Halfway
Can you work in Halfway outside opening hours?
Yes. We work evenings, overnight and at weekends. The work in Halfway can fit around your hours. Your opening times are the first thing we ask for.
Will you come out to Halfway?
Yes. Villages and rural sites across the South East are part of our work, Halfway included. A survey first, from pictures or a visit, means we arrive with the right kit.
When should we have our next grease test?
We suggest a next test date in every report, taking the readings and the kitchen’s hours into account. The interval should come from a competent person’s risk assessment backed by grease measurement.
What accreditations do you have?
We hold CHAS, SafeContractor and ISO 9001, alongside BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. The Vent Hygiene Elite scheme is run by BESCA and audited independently.
Can you price the work without visiting?
Yes, for many jobs. Send a few wide pictures plus close-ups of panels, filters or grilles, and we usually come back within one working day. If pictures aren’t enough, we’ll survey first.
Can one contract cover all our sites?
Yes. One number covers all your sites across London and the South East, and visits can be set on a regular cycle.
What does TR19 mean?
BESA’s ventilation hygiene specification in two main parts: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It isn’t law, but it’s the benchmark.
At what point does grease need cleaning?
Under TR19® Grease, the mean thickness should not exceed 200 microns between cleans. Any reading of 500 microns or more needs immediate spot cleaning.
Why act early in Halfway
Surveying first means the clean goes to plan. Access problems are spotted in advance rather than on the night, and the quote reflects the real job. Rural sites cannot always move to another kitchen or room when something fails.
What you pay reflects the actual work. That is why we survey first, from pictures or on site, and the price is agreed before we start.
What you get with us
- Fully insured
- Out-of-hours work and a 24/7 emergency line
- We diagnose before we treat
- One number for every site across the South East and London
See our cost guide and how to check a contractor.
Staff cleaning versus specialist work
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We can diagnose it and quote.
The process
We turn up at the time agreed with you, which is often after service, overnight or at a weekend. Equipment that has to be off is switched off and allowed to cool before work begins, and floors and nearby surfaces are sheeted. On site, it takes an hour or two for a single kitchen, longer for a large or complex system. Somewhere like Halfway, lanes, gates and parking are worth mentioning in advance.
- The visit is arranged for when the kitchen isn’t busy.
- The system is checked from canopy to discharge.
- Grease readings are taken at set points using WFTT or DTT.
- Each test point and any access problems are photographed.
- You get a report with readings, photos and recommendations.
How to prepare
- Find the previous report, if there is one
- Name a contact who can let us in at the agreed time
- Let us know about parking and loading
Get a fixed quote
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, you get a fixed price before work begins.
Read more
How the job changes from site to site
Canopy and plenum
Clean-looking filters do not mean a clean plenum. So we measure behind the filters, not just in front.
Restaurants, pubs and hotels
A kitchen running from breakfast to late service builds grease quickly. Regular testing shows whether the cleaning interval keeps up.