Kent · TR19 inspections and grease testing
TR19 inspections and grease testing in Eddington, Kent
We cover Eddington for TR19 inspection. Fixed quotes, work around your opening hours and photo reports as standard.
- Parts of the system left out of past cleans
- Confirming a clean reached the whole system
- Extracts that may be over the 200 micron mean
How we handle TR19 inspection in Eddington
Before any clean in Eddington, we survey the canopy, plenum, filters, ducts, fan and discharge. Access is checked along the full length, and record grease readings at set points. The work covers wet film thickness tests, insurer audits and pre-clean surveys, and the jobs we see most are extracts that have never been grease tested and uncertainty over how often to clean.
In a smaller place like Eddington, the kitchens with extract systems are more likely to be a pub, a café, a takeaway or a school or care home kitchen than a big restaurant. A kitchen that cooks fewer hours still builds up grease, so the interval is set by hours of use and grease readings.
Each visit ends with a written report and photos, so there’s a dated record of the work. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Location
- Eddington (CT6)
- Wider area
- Kent
- Reporting
- Certificate and photo report
- Price
- Fixed quote, usually within a working day
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
Signs you need TR19 inspection in Eddington
Grease is fuel. A flare-up on the range can be drawn into the canopy and duct, and from there a fire can spread through the ductwork. Measuring it is the first step to keeping it under control.
Any of these means the system needs a check-up:
- Missing TR19 certificates or history
- Heavy grease suspected in the plenum or ducts
- Uncertainty over how often to clean
- Systems that need surveying before cleaning
If you run a café or takeaway near Herne Bay station, early starts and late finishes leave little time to clean, so overnight extract cleaning suits.
Questions to ask before you book
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- How they set the interval to the next visit
- If the quote is a fixed price or an estimate
- Whether the whole system is included, or only the parts that are easy to reach
What happens on the day
Your staff don’t need to do much on the day. Someone lets us in at the agreed time and shows us where everything is, and the rest is down to us. Afterwards, the area is left tidy and the written report follows. Visits to a place like Eddington are planned ahead, so we arrive with what the survey says the job needs.
- First we look at the system’s cleaning history, if there is one.
- The layout is traced from the canopy to the discharge.
- Access panels are located and any missing ones noted.
- We measure the grease and photograph each point.
- We report back with readings and a fixed quote.
How to prepare
- Let us know about permits to work or site inductions
- Agree a time when the area can be out of use
- Make sure someone can let us in and lock up afterwards
Getting a quote
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and many jobs can be priced from that alone.
Read more
Nearby places to Eddington
More services for Eddington
How we price TR19 inspection
There’s no set price list, because sites vary so much. The quote depends on:
- A single visit or a regular plan
- Where the site is and how we reach it
- The size of the system
- Any permits to work or inductions
What you pay reflects the actual work. That’s why we survey first, from pictures or on site, and why the quote is fixed before any work starts.
Asking for a quote
Before you ask for a quote, gather:
- The times we could work without disrupting the site
- The roof, plant room or outside wall the system runs to
- Your last certificate, test record or report
- A few general shots of the system
If you need TR19 inspection in Eddington, phone us on 0345 646 2711 or email us. Let us know the site type and the opening hours, and send photos or your last report if you can. A fixed quote normally follows within one working day.
What TR19 inspection looks like in Eddington
At about 2 miles from the coast, Eddington is close enough for sea air to matter. Corrosion on the fan housing and cowl is worth a look at every clean, alongside the grease. Food Standards Agency records list about 81 restaurants, cafés and canteens and about 34 sandwich bars and takeaways in Eddington and the streets around it, up to about 1.5 miles out. For any of them with a canopy, measuring grease is better than guessing when to clean. It’s Canterbury City council that sends environmental health officers to food businesses in Eddington. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Before-and-after pictures from each clean are a simple way to show the extract is in hand.
If you run a church or community hall kitchen, near Church of St Martin or elsewhere in Eddington, its extract still collects grease from every lunch and event. Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; Whitstable and Tankerton Hospital is the nearest hospital to Eddington, about 3.2 miles west.
Eddington is about 1 mile south-west of Herne Bay, in Kent. If you need TR19 inspection in Eddington, please ring 0345 646 2711, or send details by email for a fixed quote. We work across South East England and London, including Eddington. Eddington is one of 922 places in Kent we cover for TR19 inspection. There’s also a page for Maidstone, roughly 27 miles from Eddington.
Work in CT6 follows the same survey, fixed quote and written report as everywhere else we cover. Local streets include Parkland Road, Cooper Drive and Sidney Grove, all of which we cover for TR19 inspection. We also cover the places around Eddington: Bullockstone (1 mile south-west), Herne (1 mile south-east), Greenhill (1 mile west), Hunters Forstal (1 mile east) and Herne Bay (1 mile north-east). We also work in nearby towns such as Canterbury (6 miles south), Margate (11 miles east), Ramsgate (13 miles east), Broadstairs (13 miles east), Whitstable (4 miles west) and Deal (15 miles south-east).
Around Eddington
Typical jobs here are in premises near Herne Bay Infant School, Queen's Head Public House and Curtis Wood, among other places. Eddington’s nearest station is Herne Bay station, roughly 0.5 miles north-west. Nearby you’ll also find Tankerton Castle (3.8 miles west) and Whitstable and Tankerton Hospital (3.2 miles west). The countryside around Eddington includes West Blean and Thornden Woods.
Different parts, different methods
Horizontal duct runs
Bends and long runs can hold heavy deposits, well away from where anyone looks.
Restaurants, pubs and hotels
We test between services, early in the morning or after close so trading is not affected.
When it’s something else
We will not sell you work that doesn’t address the problem, so these are the things it will not cover:
- Mechanical faults in the extract
- Sections with no access, until panels are fitted
- Design faults in the extract system
If in doubt, call us on 0345 646 2711 or use the quote form and we will say what we think.
What the work covers
- Insurer audits
- Access surveys
- Post-clean checks
- Pre-clean surveys
- Wet film thickness tests
- Deposit thickness tests
Common questions in Eddington
Which fire service covers Eddington?
Eddington is in the area of Kent Fire and Rescue Service. Records of extract cleaning are a sensible thing to have ready if a fire safety officer carries out an audit.
Is TR19 inspection any different in a coastal place like Eddington?
It can, as Eddington is within about 2 miles of the sea, where salt in the air is hard on metal. A fan housing that’s rusting near the coast can fail sooner, so it’s worth catching early.
What information do you need?
Some pictures and a quick description of the system, with the address and opening hours. We will ask for anything else we need.
Can you quote from photos?
Typically, yes. Send wide shots, close-ups of any access panels and anything that worries you, and we normally come back within one working day. If photos are not enough, we will survey first.
How often should grease be tested?
We suggest a next test date in every report, based on the readings and how the kitchen is used. A risk assessment based on measured grease should set the interval.
Can we book visits on a schedule?
Yes. Regular plans can run on 3, 6 or 12-monthly cycles, depending on what the system needs.
How much time does an inspection need?
Testing takes an hour or two for a single kitchen, longer for a large or complex system. Sites with several canopies take longer, and you can call us on 0345 646 2711 or send us an email to book it in.
Do you offer emergency callouts?
Yes, any time. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line, and we will advise on what to do next.
Why deal with it now?
Catching heavy deposits early keeps the fix small. Left alone, grease keeps building between cleans. It’s better to plan the work at a site near Eddington than wait for a failure.
Kitchens, offices, schools and hospitals are all priced the same way: the size of the job, access, condition and working hours. Call for a fixed quote and we’ll go through it with you.
Why Eddington businesses choose us
- Every visit written up, with photos
- Out-of-hours work and a 24/7 emergency line
- Accredited under CHAS and SafeContractor, with ISO 9001
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
Take a look at what affects the cost or how to check a contractor.
Aftercare tips
After the visit, a few habits help the work last:
- Store grease readings where your insurer can see them
- Don’t box in or cover duct access panels
- Diary the next grease test and clean
- Wipe the canopy surfaces regularly
You get a report with the grease readings, where they were taken and pictures of each point. File it alongside your TR19 certificates.
When cooking hours or the menu change, check the interval still fits. Fresh readings show whether it needs to change.