Kent · TR19 inspections and grease testing

Danaway TR19 inspection

TR19 inspections and grease testing for Danaway, with a survey first and a report with photos at the end. Ask us for a fixed quote.

  • Kitchen extract systems with no recent grease readings
  • Insurers asking for TR19 evidence
  • Systems that need surveying before cleaning

Book TR19 inspection in Danaway

TR19 inspection for kitchens and businesses in Danaway

After a clean, post-clean verification checks the result, with new readings and photos of the cleaned areas. It shows whether the system was left in the condition the paperwork describes. If you’re dealing with sections of duct that can’t be reached and insurance renewals needing proof of TR19 cleaning, we can help, from wet film thickness tests, insurer audits and post-clean checks onwards.

In a village or hamlet like Danaway, the kitchens that need extract cleaning are normally a pub, a school, a care home or a hall kitchen, wherever there is one. Every one of them still needs its extract kept clear of grease.

The sign-off is always in writing: a written report, dated and illustrated with photos, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. It shows what was done and what, if anything, couldn’t be reached.

Place
Danaway (ME9)
Wider area
Kent
Reporting
TR19® certificate and photo report
Price
A fixed price before any work starts
Working hours
Evenings, overnight and weekends; 24/7 emergencies
Phone
0345 646 2711
Reviewed
30 October 2026
The Duct Doctor team standing beside their branded white and blue vans

Danaway questions

Who inspects food businesses in Danaway?

That is Swale council, whose environmental health officers carry out food hygiene inspections in Danaway. How often a business is inspected depends on the risk rating the council gives it, so it’s worth staying ready all year.

Do you work overnight in Danaway?

Yes, evening, overnight and weekend work is normal for us. The site is handed back ready to open. When you give us a ring on 0345 646 2711 or use the quote form, mention when the site is quiet.

How do you keep the site clean during the work?

With sheeting and covers, before anything else happens. We keep the work contained and clean down when we finish.

What’s TR19?

TR19® is the BESA specification for keeping ventilation systems clean. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.

What information do you need?

Some pictures and a quick description of the system, with the address and opening hours. If we need more, we will ask.

Do you offer maintenance contracts?

Yes. Tell us what you have and how it’s used, and we’ll suggest a schedule and quote for it.

What happens on a pre-clean survey?

A survey finds out how the system is laid out, how dirty it is and what can be reached, before anyone starts cleaning. Missing access panels are noted so they can be sorted first.

Can one contract cover all our sites?

Yes. Send the list of sites and the work at each and we will quote them together.

Common problems we fix in Danaway

Looking at a canopy tells you little about what’s in the duct. A system can look clean at the filters and be heavily coated further in, so readings are the reliable guide.

It’s time to book a visit if you see:

  • Missing TR19 certificates or history
  • Ductwork where grease may be over the TR19 limits
  • Pre-clean surveys before a first TR19 clean
  • An insurer’s request for a TR19 audit

Term dates shape school work: for a school like Borden Church of England Primary School, an extract clean fits neatly into a half-term or summer break.

Questions to ask before booking

  • Whether the quote shows VAT
  • What paperwork you get at the end
  • When the next visit should be, and why
  • Proof of insurance

Choosing a duct cleaning contractor

Fixed quotes for TR19 inspection in Danaway

Sites vary more than people expect. The main factors:

  • Where the site is and how we reach it
  • What state the system is in
  • How easy every part is to reach
  • The size of the system

One small site or a whole estate, the quote is built the same way: the work involved, the access and the timing. You’ll have a fixed price before we start.

What to send for a quote

We can often survey from pictures. Try to include:

  • Detail shots of panels, filters and grilles
  • The roof, plant room or outside wall the system runs to
  • A few general shots of the system
  • The paperwork from the last visit, if you have it

Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, the quote is fixed before any work is booked.

Managing agents and facilities teams in Danaway

When the building owner and the occupier are different, the lease normally sets out who maintains what. We are happy to deal with either side, and the report can go to both.

We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.

What we do, step by step

The first job on site is protection: floors, worktops and anything near the work are covered. Then we make the system safe and start. The work on site takes around an hour or two per canopy and duct system, and the area is cleaned down before we leave. Photos of the system and how to reach it help us plan a visit to Danaway.

  1. First we book a time that will not disrupt cooking.
  2. The system is checked from canopy to discharge.
  3. Grease readings are taken at set points using WFTT or DTT.
  4. Photos are taken at each point, and access gaps noted.
  5. We send a report setting out the readings, photos and next steps.

Getting ready for the visit

  • Agree a time when the area can be out of use
  • Plan for cooking equipment or plant to be off before we arrive
  • Arrange a key holder or contact on site

Getting a quote

If you need TR19 inspection in Danaway, phone us on 0345 646 2711, or send details by email. Let us know the site type and the opening hours, and send pictures or your last report if you can. A fixed quote usually follows within one working day.

Ask for a quote

Related advice

What staff can safely do

If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, they should report it rather than try to fix it. We will take a look and send you a fixed quote.

A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. Leave those to us.

What a clean will not put right

Not every problem is solved by TR19 inspection, and we’ll tell you before we start. It will not put right:

  • Sections with no access, until panels are fitted
  • Removing the grease, which is a separate clean
  • Design faults in the extract system

If in doubt, phone us on 0345 646 2711 or use the quote form and we will say what we think before you book.

What we work on in Danaway

  • Wet film thickness tests
  • Deposit thickness tests
  • Insurer audits
  • Access surveys
  • Pre-clean surveys
  • Post-clean checks

TR19 inspection in Danaway: the local picture

Look up Danaway on the FSA’s food hygiene register and you’ll find about 6 restaurants, cafés and works canteens and about 3 takeaways and sandwich shops in and around Danaway, up to about a mile and a half out. For any of them with a canopy, measuring grease is better than guessing when to clean. Food hygiene inspections in Danaway are the job of Swale council’s environmental health team. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Keeping each certificate and photo report on file helps show the extract is looked after. Danaway is covered by Kent Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.

A hall kitchen that only cooks for events, whether near Church of St Peter and St Paul or elsewhere in Danaway, still needs its extract cleaned, just less often.

Danaway is about 3 miles west of Sittingbourne, in Kent. If you need TR19 inspection in Danaway, it’s easy to get a fixed quote: please give us a ring on 0345 646 2711 or use the quote form. Our area covers London and the South East, including Danaway. Danaway is one of 922 towns, villages and districts in Kent we cover for commercial clients. For sites nearby, see our Maidstone page (8 miles or so).

Postcode districts we cover here for TR19 inspection: ME9. That includes premises on Westfield Gardens, Oak Close and Wormdale Hill and the roads around them. Close by, we work in Oad Street (1 mile south-east), Chestnut Street (1 mile north-east), Newington (1 mile north), Keycol (1 mile north-east) and Bobbing (1 mile north-east). Further out, we also cover Maidstone (8 miles south-west), Sittingbourne (3 miles east), Gravesend (14 miles north-west), Whitstable (15 miles east), Faversham (9 miles east) and Minster (8 miles north-east).

Landmarks near Danaway

Around Danaway, our work takes us to kitchens and buildings near Westlands School and Plough & Harrow pub and the streets around them. Danaway’s nearest station is Newington station, about 1.2 miles north. Well-known places in the area include Bayford Court (3 miles east) and Court Hall Museum (2.7 miles east). The countryside around Danaway includes Detling Hill.

Map of Danaway © OpenStreetMap contributors

What happens if it’s left?

Finding a hotspot early means a targeted spot clean rather than a bigger problem later. Left alone, grease keeps building between cleans. In a place like Danaway, ductwork and fans are easy to forget until something goes wrong.

We do not list prices on the website, because each job is priced on what it involves. For a fixed quote, give us a ring on 0345 646 2711 or send us an email, and we will talk you through it.

What you get with us

  • CHAS and SafeContractor accredited, with ISO 9001
  • BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
  • In business since 2009
  • Survey first, then a fixed quote

See what affects the cost or our accreditations and certificates.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London