Kent · TR19 inspections and grease testing
TR19 inspections and grease testing in Berwick, Kent
TR19 inspections and grease testing for businesses, landlords and public buildings in Berwick. BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease.
- Pre-clean surveys before a first TR19 clean
- Cleaning intervals that may not suit the kitchen
- Sections of duct that can’t be reached
TR19 inspection for kitchens and businesses in Berwick
Not every kitchen fits neatly into a calendar. Some kitchens build up grease faster than the minimum intervals assume, and only measurement shows it. Our readings give your risk assessment real numbers to work from. The work covers deposit thickness tests, wet film thickness tests and post-clean checks, and the jobs we see most are systems cleaned on a calendar with no measurements and cleaning intervals that may not suit the kitchen.
Work in a small place like Berwick starts with a call to agree access and timings, and the clean itself is the same full TR19® job as in any town: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
Each visit ends with a written report and pictures, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Where
- Berwick (CT21)
- Wider area
- Kent
- Records
- Certificate and photo report
- Price
- A fixed quote up front
- Working hours
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
Aftercare tips
To keep the system working properly between visits:
- Mention new equipment or longer hours at the next test
- Keep the route to access panels clear
- Keep TR19 certificates, readings and reports together
- Keep canopy edges and gutters wiped down
Readings of 500 microns or more are highlighted as needing immediate spot cleaning, and we can arrange it.
When cooking hours or the menu change, check the interval still fits. Fresh readings show whether it needs to change.
In-house cleaning or a specialist?
Away from the kitchen, the in-house job is mainly checking: clear grilles, a log of filter changes and reporting anything odd. The inside of ducts and units needs a specialist.
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. Leave those to us.
Places near Berwick
Also in Berwick
Landlords, agents and facilities managers
From a single site to a large estate, the standard is the same: a survey first, a fixed quote, the work timed around the site and a report with pictures.
Records are where multi-site compliance often slips. Each visit produces a dated report with pictures, so you can show an insurer or inspector what was done at each site.
Grease, kitchens and Berwick
Berwick is within about 2 miles of the coast. Salt in the air is hard on rooftop fans, discharge cowls and fixings, so we check them for corrosion as well as grease. The FSA’s data shows about 3 pubs, bars and clubs registered within about 1.5 miles of central Berwick. Where they serve hot food, their kitchen extracts need cleaning to TR19® like any restaurant’s. Fire safety in Berwick falls to Kent Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel.
For schools such as Lympne Church of England Primary School, kitchen extract cleaning is typically booked for the holidays, when the canteen is closed. Westenhanger Castle, about 0.9 miles north, is one of the historic houses near Berwick; if you run event catering at a venue like that, cleans can be booked between functions. If you run a church or community hall kitchen, near Church of St Stephen or elsewhere in Berwick, its extract still collects grease from every lunch and event.
Berwick is about 2 miles west of Hythe, in Kent. Whatever kind of site you run in Berwick, TR19 inspection is something we can help with. We can work out of hours so the site keeps running. Berwick is one of 922 towns, villages and districts in Kent we cover for TR19 inspection. Maidstone is in our area too, around 25 miles away.
Work in CT21 follows the same survey, fixed quote and written report as everywhere else we cover. If you need TR19 inspection at premises on Stone Street, Folks Wood Way and Honeywood Close or anywhere close by, our technicians can take on the work. If your site is just outside Berwick, we cover Lympne (1 mile south-west), Newingreen (1 mile north-east), Westenhanger (1 mile north), West Hythe (1 mile south) and Pedlinge (1 mile east). Larger places within reach include Ashford (8 miles north-west), Canterbury (14 miles north), Dover (12 miles east), Folkestone (6 miles east), Tower Hamlets (12 miles east) and Hawkinge (6 miles east).
Local landmarks in Berwick
Locally, jobs take us to businesses close to Brockhill Park Performing Arts College, Sandling Park and The Royal Oak Public House. The closest station to Berwick is Westenhanger station, about 1 mile north. Other landmarks nearby include Lympne Castle (0.7 miles south-west) and Hythe Museum (2.4 miles east). Open spaces near Berwick include Tolsford Hill.
Part by part
Horizontal duct runs
Sections without access are recorded so panels can be added.
Canopy and plenum
Filters can look fine while the plenum behind them is heavily coated. That is why we test behind them.
The process
Protection comes first: floors, worktops and anything near the work are covered. After that, the system is made safe and the work begins. It takes a couple of hours for a typical kitchen extract system, and the area is cleaned down before we leave. The timing of a visit to Berwick is set by you, and the travel is our side of the planning.
- First we look at the system’s cleaning history, if there is one.
- We follow the extract from canopy to discharge.
- Access panels are located and any missing ones noted.
- We measure the grease and photograph each point.
- You get a report and a fixed quote for the clean.
Before we arrive
- Clear loose items from the work area
- Tell us the best time to work, such as after service or at a weekend
- Arrange a key holder or contact on site
How to get a quote
Here’s what helps us quote: where the site is, what it is and its opening hours, a few photos and the last certificate or report, if there is one. Then call 0345 646 2711 or send us an email.
Related advice
Honest limits
To be straight with you, some problems need a different fix:
- Parts of the duct nobody can reach yet
- The legal duty, which stays with the responsible person
- Ductwork that was designed or installed badly
If you are not sure, just phone us on 0345 646 2711 or email us and we’ll give you a straight answer.
What we work on in Berwick
- Wet film thickness tests
- Access surveys
- Post-clean checks
- Pre-clean surveys
- Deposit thickness tests
- Insurer audits
Berwick: your questions answered
Can you clean school kitchen extracts in Berwick during the holidays?
Yes, and it’s the easiest time to do it. Around Berwick, the Food Standards Agency lists about 2 schools and colleges with registered kitchens within a mile and a half or so. You can ring 0345 646 2711, or email photos with the dates the site is empty.
Which fire service covers Berwick?
Berwick is in the area of Kent Fire and Rescue Service. A recent cleaning certificate and a note of the next clean date show that grease in the extract is being managed.
Why survey before a clean?
It’s a look at the whole extract before it’s cleaned, with readings and pictures. We can work from photos and details, or visit, as suits the job.
What is grease thickness testing?
Readings are taken using the Wet Film Thickness Test or the Deposit Thickness Test, then compare them with the TR19® Grease figures.
Can you quote from photos?
Yes, where the photos show enough. If not, a site survey comes first, and the quote follows that.
Can you verify a clean after it’s been done?
Post-clean verification is a check after a clean, with fresh grease readings and photos. It can follow our own cleans or another contractor’s.
How do you keep the site clean during the work?
Floors and surfaces near the work are sheeted before work begins, and anything we remove is contained. Before we leave, we tidy up and clean down.
Can one contract cover all our sites?
Yes. We work across South East England and London, so we can schedule a run of sites on one programme. Every site has its own report.
What affects the quote in Berwick
The diagnosis comes before the price. The main factors are:
- Where the site is and how we reach it
- Site rules, permits and inductions
- The scale of the work
- How easy every part is to reach
Kitchens, offices, schools and hospitals are all priced the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we’ll go through it with you.
What to send for a quote
Before you ask for a quote, gather:
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- A few general shots of the system
- Detail shots of panels, filters and grilles
- Your opening hours and when the area is out of use
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and many jobs can be priced from that alone.